Insignia NS-55E790A12 User Manual (English) - Page 17

Using DVI same as HDMI but requires a sound, connection, Using component video better

Get Insignia NS-55E790A12 PDF manuals and user guides View all Insignia NS-55E790A12 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Insignia 55" LED-LCD HDTV, 120 HZ 1080p Using DVI (same as HDMI but requires a sound connection) Note A DVI device must be connected to the HDMI 1 jack. If you connect a DVI device to another HDMI jack, you will not hear audio. To connect a cable or satellite box using DVI: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable box. 3 Connect an HDMI-DVI adapter (not included) to one end of an HDMI cable (not included). 4 Connect the HDMI-DVI adapter to the DVI OUT jack on the cable or satellite box, then connect the other end of the cable to the HDMI 1 jack on the back of your TV. . Cable or satellite box Using component video (better) To connect a cable or satellite box using component video: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable box. 3 Connect a component video cable (included) to the Y-VIDEO, PB, and PR jacks on the side of your TV and the component video out jacks on the cable or satellite box. Cable or satellite box 3.5 mm audio cable HDMI cable with HDMI-DVI adapter Audio cable Component video cable Side of TV Back of TV AUDIO OUT DIGITAL OUTPUT ANT /CABLE VGA PC / DVI AUDIO IN HDMI 1 / DVI HDMI 2 (ARC) 5 Connect a 3.5 mm audio cable (not included) to the PC/DVI AUDIO IN jack on the back of your TV and to the AUDIO OUT jack on the cable or satellite box. Note When you connect the audio using the PC/DVI AUDIO IN jack, the audio output is analog. 6 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 7 Go through the setup wizard on page 22. 4 Connect an audio cable (included) to the L and R audio jacks on the side of your TV and to the audio out jack on the cable or satellite TV box. Note When you connect the audio using the L and R audio jacks, the audio output is analog. You can connect the video to the component video jacks and connect the audio to the digital audio jack to get digital audio output. 5 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 6 Go through the setup wizard on page 22. www.insigniaproducts.com 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
13
Insignia 55" LED-LCD HDTV, 120 HZ 1080p
www.insigniaproducts.com
Using DVI (same as HDMI but requires a sound
connection)
To connect a cable or satellite box using DVI:
1
Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2
Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable box.
3
Connect an HDMI-DVI adapter (not included) to
one end of an HDMI cable (not included).
4
Connect the HDMI-DVI adapter to the
DVI OUT
jack on the cable or satellite box, then connect
the other end of the cable to the
HDMI 1
jack on
the back of your TV.
.
5
Connect a 3.5 mm audio cable (not included) to
the
PC/DVI AUDIO IN
jack on the back of your
TV and to the
AUDIO OUT
jack on the cable or
satellite box.
6
Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
7
Go through the setup wizard on page 22.
Using component video (better)
To connect a cable or satellite box using
component video:
1
Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2
Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable box.
3
Connect a component video cable (included) to
the
Y-VIDEO
,
P
B
, and
P
R
jacks on the side of
your TV and the component video out jacks on
the cable or satellite box.
4
Connect an audio cable (included) to the
L
and
R
audio jacks on the side of your TV and to the
audio out jack on the cable or satellite TV box.
5
Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
6
Go through the setup wizard on page 22.
Note
A DVI device must be connected to the
HDMI 1
jack.
If you connect a DVI device to another
HDMI
jack,
you will not hear audio.
Note
When you connect the audio using the
PC/DVI
AUDIO IN
jack, the audio output is analog.
PC / DVI
AUDIO IN
HDMI 1 / DVI
AUDIO OUT
DIGITAL
OUTPUT
ANT /CABLE
VGA
HDMI 2
(ARC)
Cable or satellite box
HDMI cable with
HDMI-DVI adapter
3.5 mm audio cable
Back of TV
Note
When you connect the audio using the
L
and
R
audio
jacks, the audio output is analog.
You can connect the video to the component video
jacks and connect the audio to the digital audio jack
to get digital audio output.
Side of TV
Component video cable
Cable or satellite box
Audio cable