Insignia NS-55E790A12 User Manual (English) - Page 18

NS-55E790A12 Insignia 55" LED-LCD HDTV, 120 HZ 1080p Using composite video (good) To connect a cable or satellite box using composite video: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable box. 3 Connect an A/V cable (not included) to the Y-VIDEO and L/R (audio in) jacks on the side of your TV and to the composite video and audio out jacks on the cable or satellite box. Cables are often color-coded to match color-coded jacks. Note: The yellow connector on the AV cable plugs into the green Y-VIDEO jack. Cable or satellite box Using coaxial (good) To connect a cable or satellite box using coaxial: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a coaxial cable (not included) to the ANT/CABLE jack on the back of your TV and to the coaxial out jack on the cable or satellite box. Cable or satellite box Side of TV A/V cable 4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Go through the setup wizard on page 22. Back of TV AUDIO OUT DIGITAL OUTPUT ANT /CABLE VGA PC / DVI AUDIO IN HDMI 1 / DVI HDMI 2 (ARC) Coaxial cable 4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Go through the setup wizard on page 22. Notes • • Use a coaxial cable to eliminate interference and noise from radio waves. Do not bundle the coaxial cable with the power cord or other cables. 14 www.insigniaproducts.com