Insignia NS-CSPBT02-BL Quick Setup Guide

LISTENING TO MUSIC

1

Press the

(source) button on your speaker, then connect to your

Bluetooth device.

2

Begin playback on your Bluetooth device.

3

Adjust the volume on your speaker by pressing the

+

or

-

buttons.

Note

: Use the controls on your Bluetooth device to control playback.

TAKING A CALL VIA BLUETOOTH

1

Press the

(phone) button briefly to accept an incoming call.

OR

Press and hold the

(phone) button to reject an incoming call.

2

Press the

(phone) button during a call to end the call.

PLAYBACK USING AUX IN

1

Connect an external sound source, such as an MP3 player, by plugging

a 3.5 mm audio cable (not included) into the AUX IN jack on your

speaker.

2

Press the

(source) button to enter AUX mode. The LED lights

green.

3

Start playback on the external device.

4

Press

+

and

–

to adjust the volume.

5

Control playback using the controls on the audio device.

Quick Setup Guide

|

NS-CSPBTHOL

Bluetooth Stereo Speaker with Powerbank

CONNECTING WITH BLUETOOTH

1

Make sure that your Bluetooth device is turned on and within 33 feet

(10 meters) of your speaker.

2

On your speaker, press the Source button. Your speaker enters pairing

mode, and the LED blinks.

Note

: Press and hold the Source button to return to pairing mode.

3

Turn on your Bluetooth device and turn on Bluetooth. Set your device

to pairing mode, then select

NS-CSPBTHOL

. See the instructions that

came with your Bluetooth device for information about pairing.

4

If you are asked for a password, enter

0000

. When pairing is complete,

the LED lights solid blue.

5

To disconnect from the paired Bluetooth device, press and hold the

Source button on your speaker for three seconds. Your speaker

disconnects from the Bluetooth device and enters pairing mode again.

RECONNECTING TO A PAIRED DEVICE

When your speaker is not paired to a device, the LED blinks blue slowly.

Note

: If a device does not automatically reconnect, you may need to reselect

NS-CSPBTHOL

on your Bluetooth device.

Before using your new product, please read

these instructions to prevent any damage.

Front view

Top view

CHARGING YOUR SPEAKER

1

Connect the small end of your USB charging cable to the micro USB

port on the back of your speaker.

2

Connect the other end to a USB charging port. The power indicator

lights red while charging, then turns off when fully charged.

Note

: When the battery is low, you will hear beeps every two minutes. About

10 minutes later, the speaker will power off automatically.

TURNING YOUR SPEAKER ON AND OFF

•

Slide the ON/OFF switch. When on, the LED blinks quickly and the

speaker enters pairing mode.

PACKAGE CONTENTS

• Bluetooth speaker

• USB charging cable

•

Quick Setup Guide

FEATURES

•

Wirelessly stream from any

Bluetooth device

•

Rechargeable battery lasts up

to six hours

• Speakerphone for hands-free

talking

LED

Blinks blue

Solid blue

DESCRIPTION

Speaker is in pairing mode

Speaker is paired

To audio output such

as CD/MP3/digital

music player.

Your speaker loses the

Bluetooth connection if you...

Turn off your speaker.

Move the Bluetooth device out of range.

Turn off your Bluetooth device.

Turn off Bluetooth on your Bluetooth device.

Connect your Bluetooth device to another

Bluetooth device.

To reconnect...

Turn on your speaker. Your speaker searches for the last connected

Bluetooth device and reconnects.

Make sure that your Bluetooth device is within 33 feet of your speaker.

Turn on your Bluetooth device, then make sure that Bluetooth is on.

Turn on Bluetooth on your Bluetooth device.

Disconnect your Bluetooth device from the other Bluetooth device, then

set your device to pairing mode. Select

NS-CSPBTHOL

on your

Bluetooth device.

Volume down

Phone

Source

Volume up

Micro USB charging port

ON/OFF

switch

AUX in jack

Power indicator

Back view

Bluetooth LED

Insignia NS-CSPBT02-BL Quick Setup Guide

Insignia NS-CSPBT02-BL Manual

Insignia NS-CSPBT02-BL manual content summary: