Insignia NS-HDRAD Quick Setup Guide (English)
Insignia NS-HDRAD Manual
 |
View all Insignia NS-HDRAD manuals
Add to My Manuals
Save this manual to your list of manuals |
Insignia NS-HDRAD manual content summary:
- Insignia NS-HDRAD | Quick Setup Guide (English) - Page 1
high-quality Insignia product. Your NS-HDRAD represents the state of the art in HD Radio technology and is designed for reliable and trouble-free performance. Package contents • HD Radio™ Tabletop • AC power adapter • User Guide • Quick Setup Guide Features Front view Installing the batteries Note - Insignia NS-HDRAD | Quick Setup Guide (English) - Page 2
off when the headphones are being used. Troubleshooting Problem: My radio won't turn on. Solution: • Make sure that the power cord is fully inserted in the power outlet and firmly connected to the DC IN jack on the back. • If running on batteries, make sure the batteries are not dead. No sound
-
1 -
2
 |
 |
Features
Front view
Back view
Side view
Congratulations on your purchase of a
high-quality Insignia product. Your
NS-HDRAD represents the state of the art
in HD Radio technology and is designed
for reliable and trouble-free performance.
Package contents
• HD Radio™ Tabletop
• AC power adapter
•
User Guide
•
Quick Setup Guide
Installing the batteries
Note
: You only need to install batteries if you want
to use your boombox on the go.
1
Open the battery compartment on the back of
your radio.
2
Place four AA size alkaline batteries (not
included) in the battery compartment.
Make sure to match the + and - on the battery
to the + and - signs in the battery compartment.
3
Close the battery compartment until it clicks
into place.
Connecting the AC adapter
1
Plug the small connector at the end of the
power cord into the DC IN jack on the back of
your radio.
2
Plug the AC adapter into a 120/240V, 50/60Hz
power outlet.
Turning on your radio
• Press
(power) on the front of your radio.
Selecting the mode (source)
• Press
SOURCE
repeatedly on the front of your
radio to toggle between
Tuner
and
AUX
. The
source you select appears on the display.
Volume control
•
After you select the mode you want, press
VOLUME+
or
–
to set the volume to a comfort-
able level.
Quick Setup Guide
HD Radio™ Tabletop I NS-HDRAD
#
Component
1
MEMORY
button
2
PRESET
–/+ button
3
TUNING
–/+ button
4
LCD display
5
VOLUME
–/+ button
6
HD SEEK
–/+ button
7
SOURCE
button
8
(power) button
9
Speakers
10
DC IN jack
11
AUX IN jack
12
FM Antenna
13
Pigtail antenna
socket (35 mm)
14
Battery compartment
door
15
Foot
16
Headphone jack
Description
Press to save preset FM radio stations. After pressing the
MEMORY
button, press
PRESET+
or
PRESET–
to set the preset number. You
can save up to 20 presets.
Press to tune the FM radio to a preset station.
Press to go to a lower or higher radio frequency. Press for more
than one second to auto scan for the next lower or higher radio
station.
Displays mode and frequency.
Press to raise or lower the volume.
Press to go to the next or previous HD Radio station or an HD
Radio multicast station.
Press repeatedly to toggle the mode between
Tuner
and
AUX
.
Press to turn on your HD Radio Tabletop or put it into POWER OFF.
Provides sound from your radio.
Connect the AC Adapter to this jack.
Connect an external sound source, such as an MP3 player, to this
jack.
Raise to improve the FM radio signal.
Plug a wire antenna into this socket. The pigtail antenna (located
behind the battery compartment door) is optional and is to be
used to improve reception when the signal is weak. The FM
antenna is disabled when the pigtail antenna is connected.
Open to install four AA batteries in the battery compartment. Be
sure to observe the correct battery polarity as shown in the
compartment.
Supports the tabletop radio.
Connect a pair of headphones to this jack with a 3.5 mm plug.
Insert four AA
batteries in this
compartment.
LCD display
Battery life
Signal strength
HD Radio
signal
FM signal