Insignia NS-HF2007 User Guide

Insignia NS-HF2007 Manual

Get Insignia NS-HF2007 PDF manuals and user guides View all Insignia NS-HF2007 manuals
Add to My Manuals
Save this manual to your list of manuals

Insignia NS-HF2007 manual content summary:

  • Insignia NS-HF2007 | User Guide - Page 1
    ASSEMBLY GUIDE 58" TV Gaming Stand NS-HF2007 Before using your new product, please read these instructions to prevent any damage.
  • Insignia NS-HF2007 | User Guide - Page 2
    instructions 7 Maintaining your TV stand 50 Specifications 50 ONE-YEAR LIMITED WARRANTY 51 IMPORTANT SAFEGUARDS Please read and understand this entire manual audio and/or video equipment to furniture not specifically designed to support audio and/or video equipment may result in death or serious
  • Insignia NS-HF2007 | User Guide - Page 3
    NS-HF2007 Features • Supports 65 in. (165 cm) TVs up to 60 lbs. (27.2 kg) • Multiple shelves provide a surplus of storage options for your game console, Blue-ray player,
  • Insignia NS-HF2007 | User Guide - Page 4
    Maximum weights 5 lbs. (6.8 kg) 58" TV Gaming Stand 30 lbs. (13.6 kg) TV size: 61" 60 lbs. (155 cm) (27.3 kg) 20 lbs. (9.1 kg) 20 lbs. (9.1 kg) 60 lbs. (27.3 kg) WARNING: You can use most flat panel televisions weighing 60 lbs. (27.3 kg) or less. Using televisions or weights heavier than the
  • Insignia NS-HF2007 | User Guide - Page 5
    B Left divider panel (1) C Right divider panel (1) D Long lower shelf (1) F Front edge (1) G Top (1) H Lower support (1) M Lower back panel (1) I Left side support (1) J Right side support (1) K Left side (1) L Right side (1) N Door (1) O Short upper shelf P Left drawer Q Right drawer
  • Insignia NS-HF2007 | User Guide - Page 6
    KK Lower hinge pin 1 WW LL Upper hinge pin 1 58" TV Gaming Stand STAND PART Shelf support QTY. 4 3.5 × 12 mm screw 4 Drawer support 2 4 × 38 mm screw 6 4.5 × 14 mm screw 4 Back support bracket 12 3.5 × 16 mm screw 12 Cable wrap 2 Anti-tip bracket with plastic strap 2 Cam
  • Insignia NS-HF2007 | User Guide - Page 7
    Needed tool NS-HF2007 Phillips screwdriver Assembly instructions STEP 1: You need: B Left divider panel (1) C Right divider panel (1) AA 3 × 12 mm screw (6) CL DL DR CR BB Left and right rail assembly (2) Phillips screwdriver 1
  • Insignia NS-HF2007 | User Guide - Page 8
    6 Tighten the screws with a Phillips screwdriver. AA AA AA CR BB 58" TV Gaming Stand 8 www.insigniaproducts.com
  • Insignia NS-HF2007 | User Guide - Page 9
    STEP 2: You need: CC Cam screw (4) Phillips screwdriver NS-HF2007 B Left divider C Right divider panel (1) panel (1) 1 Insert two cam screws (CC) into the holes on the left divider panel (B), then tighten the screws with a Phillips screwdriver. CC CC 2 Insert two cam screws (CC) into the
  • Insignia NS-HF2007 | User Guide - Page 10
    STEP 3: You need: D Long lower shelf (1) EE Dowel (4) • Insert four dowels (EE) into the short edges of the long lower shelf (D). EE 58" TV Gaming Stand EE EE EE 10 www.insigniaproducts.com
  • Insignia NS-HF2007 | User Guide - Page 11
    STEP 4: You need: NS-HF2007 B Left divider C Right divider panel (1) panel (1) D Long lower shelf (1) DD Small cam lock (4) Phillips screwdriver Using cam locks When you insert a cam lock, position the open end of the lock toward the cam screw, then insert the cam screw into the cam lock
  • Insignia NS-HF2007 | User Guide - Page 12
    STEP 5: You need: EE Dowel (8) 58" TV Gaming Stand • Insert eight dowels (EE) into the edges of the divider panels (B and C). Make sure that you use the inside hole of each pair of holes. EE EE EE EE EE EE EE EE 12 www.insigniaproducts.com
  • Insignia NS-HF2007 | User Guide - Page 13
    STEP 6: You need: NS-HF2007 E Upper shelf (1) GG Magnetic door latch (1) FF 3 × 15 mm screw (2) Phillips screwdriver • Align the magnetic door latch (GG) with the holes on the upper shelf (E), then secure the latch with two 3 × 15 mm screws (FF) using a Phillips screwdriver. Make sure that you
  • Insignia NS-HF2007 | User Guide - Page 14
    STEP 7: You need: 58" TV Gaming Stand CC cam screw (4) Phillips screwdriver E Upper shelf (1) • Insert four cam screws (CC) into the outer holes on the upper shelf (E), then tighten the screws using a Phillips screwdriver. CC CC CC CC 14 www.insigniaproducts.com
  • Insignia NS-HF2007 | User Guide - Page 15
    STEP 8: You need: E Upper shelf (1) NS-HF2007 EE Dowel (2) Y Small divider panel (1) HH 4 × 50 mm screw (2) Phillips screwdriver 1 Insert two dowels (EE) into the long edge of the small divider panel (Y). 2 Insert two 4 × 50 mm screws (HH) through the upper shelf (E) and into the small divider
  • Insignia NS-HF2007 | User Guide - Page 16
    STEP 9: You need: DD Cam lock (4) Phillips screwdriver 58" TV Gaming Stand Using cam locks When you insert a cam lock, position the open end of the lock toward the cam screw, then insert the cam screw into the cam lock opening. 1 Insert the dowels and cam screws on the upper shelf (E) into the
  • Insignia NS-HF2007 | User Guide - Page 17
    STEP 10: You need: EE Dowel (4) NS-HF2007 A Base (1) • Insert four dowels (EE) into the edge of the base (A). Make sure that you use the holes that don't have holes above them. EE EE EE EE www.insigniaproducts.com 17
  • Insignia NS-HF2007 | User Guide - Page 18
    STEP 11: You need: 58" TV Gaming Stand F Front edge (1) CC Cam screw (4) Phillips screwdriver 1 Insert four cam screws (CC) into the edge of the front edge (F). Make sure that you use the outer screw hole in each pair of holes. 2 Tighten the screws with a Phillips screwdriver. CC CC CC CC 18
  • Insignia NS-HF2007 | User Guide - Page 19
    STEP 12: You need: NS-HF2007 A Base (1) F Front edge (1) DD Cam lock (4) Phillips screwdriver When you insert a cam lock, position the open end of the lock toward the cam screw, then insert the cam screw into the cam lock opening. 1 Insert four cam locks (DD) into the holes on the base (A). 2
  • Insignia NS-HF2007 | User Guide - Page 20
    STEP 13: You need: CC Cam screw (4) EE Dowel (4) Phillips screwdriver 58" TV Gaming Stand 1 Insert four dowels (EE) into the middle holes on the base (A). Make sure that you use the inner hole on each pair of holes. 2 Insert four cam screws (CC) into holes on the base. Make sure that you use
  • Insignia NS-HF2007 | User Guide - Page 21
    end of the lock toward the cam screw, then insert the cam screw into the cam lock opening. 1 Insert four cam locks (DD) into lower support (H). 2 Insert the cam screws in the base (A) into the cam locks, then tighten the cam locks with a Phillips screwdriver. DD DD DD DD www.insigniaproducts
  • Insignia NS-HF2007 | User Guide - Page 22
    STEP 15: You need: 58" TV Gaming Stand HH 4 × 50 mm screw (4) Phillips screwdriver 1 Insert four 4 × 50 mm screws (HH) through the base (A) and into the holes on the bottom edges of the left and right divider panels. 2 Tighten the screws with a Phillips screwdriver. HH HH HH HH 22 www.
  • Insignia NS-HF2007 | User Guide - Page 23
    STEP 16: You need: EE Dowel (12) 1 Insert four dowels (EE) into the base (A). 2 Insert four dowels (EE) into the front edge (F). 3 Insert four dowels (EE) into the left and right divider panels (A and B). EE EE EE EE EE EE EE EE EE NS-HF2007 www.insigniaproducts.com 23
  • Insignia NS-HF2007 | User Guide - Page 24
    (6) EE Dowel (4) Phillips screwdriver I Left side J Right side support (1) support (1) 1 Insert three cam screws (CC) and two dowels (EE) into the left side support (I) and three cam screws and two dowels into the right side support (J). 2 Tighten the screws with a Phillips screwdriver. CC EE
  • Insignia NS-HF2007 | User Guide - Page 25
    . 1 Insert three cam locks (DD) into the left side (K) and three cam locks into the right side (L). 2 Insert the cam screws on the left support (I) and right support (J) into the cam locks on the left and right sides, then tighten the screws with a Phillips screwdriver. DD DD DD DD DD DD www
  • Insignia NS-HF2007 | User Guide - Page 26
    STEP 19: You need: CC Cam screw (12) Phillips screwdriver 58" TV Gaming Stand • Insert six cam screws (CC) into the left side (K) and six cam screws into the right side (L), then tighten the screws with a Phillips screwdriver. CC CC CC CC CC CC CC CC CC CC 26 www.insigniaproducts.com
  • Insignia NS-HF2007 | User Guide - Page 27
    STEP 20: You need: NS-HF2007 DD Cam lock (12) Phillips screwdriver Using cam locks When you insert a cam lock, position the open end of the lock toward the cam screw, then insert the cam screw into the cam lock opening. r 1 Insert one cam lock (DD) into each corner of the bottom of the upper
  • Insignia NS-HF2007 | User Guide - Page 28
    STEP 21: You need: 58" TV Gaming Stand M Lower back panel (1) V Upper back panel (1) • Slide the lower back panel (M) into the grooves on the left and right sides (K and L) then slide the upper back panel (V). 28 www.insigniaproducts.com
  • Insignia NS-HF2007 | User Guide - Page 29
    STEP 22: You need: NS-HF2007 EE Dowel (6) • Insert two dowels (EE) into the top edges of the left side (K), the right side (K), and the small divider (Y). Make sure that you use the inside hole in each pair of holes. EE EE EE EE EE EE www.insigniaproducts.com 29
  • Insignia NS-HF2007 | User Guide - Page 30
    STEP 23: You need: 58" TV Gaming Stand CC Cam screw (6) Phillips screwdriver G Top (1) 1 Insert one cam screw (CC) into each corner and the middle of the top (G). Make sure that you use the outside hole of each pair of holes. 2 Tighten all screws with a Phillips screwdriver. CC CC CC CC CC
  • Insignia NS-HF2007 | User Guide - Page 31
    STEP 24: You need: NS-HF2007 DD Cam lock (6) Phillips screwdriver When you insert a cam lock, position the open end of the lock toward the cam screw, then insert the cam screw into the cam lock opening. 1 Insert two cam locks (DD) into the inside top edges of the left side (K), the right side
  • Insignia NS-HF2007 | User Guide - Page 32
    STEP 25: You need: 58" TV Gaming Stand VV Cam lock cover (14) • Snap cam lock covers (W) over the exposed cam locks on the left and right sides, the small divider (panel), and the left and right divider panels. VV 32 www.insigniaproducts.com
  • Insignia NS-HF2007 | User Guide - Page 33
    STEP 26: You need: NS-HF2007 SS 3.5 × 16 mm screw (12) RR Back support bracket (12) Phillips screwdriver • Insert twelve back brackets (RR) into the edges of the back panels, then secure each bracket with a 3.5 × 16 mm screw (SS). RR SS www.insigniaproducts.com 33
  • Insignia NS-HF2007 | User Guide - Page 34
    STEP 27: You need: 58" TV Gaming Stand II 3 × 16 mm screw (6) TT Cable wrap (2) Phillips screwdriver 1 Insert six 3 × 16 mm screw (II) along the outer edges of the lower back (M), then tighten the screws with a Phillips screwdriver. 2 Align two cable wraps (TT) with the holes in the middle of
  • Insignia NS-HF2007 | User Guide - Page 35
    STEP 28: You need: NS-HF2007 JJ Handle (1) Phillips screwdriver 1 Remove the screws from the handle (JJ). 2 Align the handle with the holes on the outside of the door (N), then insert the screws through the inside of the door and into the handle. 3 Tighten the screws with a Phillips screwdriver.
  • Insignia NS-HF2007 | User Guide - Page 36
    STEP 29: You need: 58" TV Gaming Stand KK Lower hinge pin (1) LL Upper hinge pin (1) FF 3 × 15 mm screw (4) Phillips screwdriver 1 Insert the lower hinge pin (KK) into the pin hole on the left bottom of cabinet. 2 Insert the upper hinge pin (LL) into the pin hole on the left top of cabinet. 3
  • Insignia NS-HF2007 | User Guide - Page 37
    STEP 30: After the door is installed, you might need to adjust the door so that it fits snuggly into the cabinet. You need: Phillips screwdriver • Loosen the hinge pin screws, slightly slide the door forward or back, then tighten the screws. NS-HF2007 www.insigniaproducts.com 37
  • Insignia NS-HF2007 | User Guide - Page 38
    Gaming Stand O Short upper shelf (1) MM shelf support (4) 1 Insert the four shelf supports (MM) inside the cabinet. Make sure that all the supports are on the same level. 2 Tilt the short upper shelf (O), then slide the shelf above the shelf supports and into the cabinet. 3 Lower the shelf onto
  • Insignia NS-HF2007 | User Guide - Page 39
    the left drawer side (P), then insert two 3.5 × 12 mm screws (NN) through the outside of the drawer and into the support. 2 Tighten the screws with a Phillips screwdriver. 3 Align a drawer support (OO) with the holes on the inside of the right drawer side (Q), then insert two 3.5 × 12 mm screws (NN
  • Insignia NS-HF2007 | User Guide - Page 40
    STEP 33: You need: 58" TV Gaming Stand R Drawer back (1) PP 4 × 38 mm screw (2) Phillips screwdriver 1 With the grooves in the drawer back (R) and the left and right drawer sides (P and Q) facing inward, insert two 4 × 38 mm screws (PP) through the left and right drawer sides and into the
  • Insignia NS-HF2007 | User Guide - Page 41
    STEP 34: NS-HF2007 S Drawer bottom (1) • With the drawer back facing down, slide the drawer bottom (S) into the grooves on the drawer sides and back. Make sure that the holes in the drawer bottom fit over the cam screws in the drawer back. www.insigniaproducts.com 41
  • Insignia NS-HF2007 | User Guide - Page 42
    STEP 35: You need: T Drawer support (1) PP 4 × 38 mm screw (2) Phillips screwdriver 58" TV Gaming Stand 1 Insert two 4 × 38 mm screws (PP) through the holes on the back of the drawer and into the holes in the drawer support (T). 2 Tighten the screws with a Phillips screwdriver. 42 www.
  • Insignia NS-HF2007 | User Guide - Page 43
    STEP 36: You need: NS-HF2007 U Drawer front (1) CC Cam screw (2) Phillips screwdriver • With the groove in the drawer front (U) facing up, insert two cam screws (CC) into the drawer front, then tighten the screws with a Phillips screwdriver. CC CC www.insigniaproducts.com 43
  • Insignia NS-HF2007 | User Guide - Page 44
    cam screw, then insert the cam screw into the cam lock opening. 1 Insert the two cam screws on the drawer front (U) into the drawer support. 2 Insert two cam locks (DD) into the two holes on the drawer support, then tighten the locks with a Phillips screwdriver. DD 44 www.insigniaproducts.com
  • Insignia NS-HF2007 | User Guide - Page 45
    STEP 38: You need: QQ 4.5 × 14 mm screw (4) Phillips screwdriver 1 Align the sides of the drawer so the holes in the brackets align with the holes on the drawer front. 2 Insert two 4.5 × 14 mm screws (QQ) through each bracket and into the drawer front. 3 Tighten the screws with a Phillips
  • Insignia NS-HF2007 | User Guide - Page 46
    STEP 39: You need: 58" TV Gaming Stand JJ Handle (1) Phillips screwdriver 1 Remove the screws from the handle (JJ). 2 Align the handle with the holes on the outside of the drawer front, then insert the screws through the back of the drawer front and into the handle. 3 Tighten the screws with a
  • Insignia NS-HF2007 | User Guide - Page 47
    STEP 40: You need: AA 3 × 12 mm screw (6) CL DL DR CR BB Left and right rail assembly (2) Phillips screwdriver NS-HF2007 1 Insert three 3 × 12 mm screws (AA) into the holes on the DL and DR parts of the rail assembly (BB). 2 Align the screws in the DL and DR parts of the rail assembly with the
  • Insignia NS-HF2007 | User Guide - Page 48
    58" TV Gaming Stand STEP 41: 1 Align the rail assemblies on the drawer with the rails inside cabinet, then slightly lift the drawer up so that the wheels fit into the slots on the rail assemblies. 2 Slide the drawer into the cabinet. 48 www.insigniaproducts.com
  • Insignia NS-HF2007 | User Guide - Page 49
    STEP 42: You need: Phillips screwdriver NS-HF2007 UU Anti-tip bracket with plastic strap (2) 1 Insert one screw through one hole on each bracket and into the left and right holes on the top of the back. Tighten the screws with a Phillips screwdriver. 2 Insert two screws through the two holes on
  • Insignia NS-HF2007 | User Guide - Page 50
    58" TV Gaming Stand Maintaining your TV stand Your TV stand is designed for year-round use with only minimal cleaning and maintenance. • Use a soft, clean, cloth that won't scratch the surface when dusting. • Use of furniture polish is not necessary. Should you choose to use polish, test first in
  • Insignia NS-HF2007 | User Guide - Page 51
    become the property of Insignia and are not returned to you. If service of Products or parts are required after the Warranty Period expires, does the warranty not cover? This warranty does not cover: • Customer instruction/education • Installation • Set up adjustments • Cosmetic damage • Damage due
  • Insignia NS-HF2007 | User Guide - Page 52
    www.insigniaproducts.com 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2021 Best Buy. All rights reserved. V2 ENGLISH 21-0540
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
Before using your new product, please read these instructions to prevent any damage.
ASSEMBLY GUIDE
58" TV Gaming Stand
NS-HF2007