Insignia NS-HTVMF0C User Manual

Insignia NS-HTVMF0C Manual

Insignia NS-HTVMF0C manual content summary:

  • Insignia NS-HTVMF0C | User Manual - Page 1
    INSTALLATION GUIDE FIXED-POSITION WALL MOUNT FOR TVs 40-70 in. NS-HTVMF0C For wood-stud, solid concrete wall, or concrete block installations Safety information and specifications . . . . . 2 Tools needed 3 Package contents 3 Installation instructions 5 Before using your new product, please
  • Insignia NS-HTVMF0C | User Manual - Page 2
    NS-HTVMF0C Safety information and specifications CAUTION: IMPORTANT SAFETY INSTRUCTIONS - SAVE Maximum TV weight: 100 lbs. (45.3 kg) THESE INSTRUCTIONS Screen size: 40 in. to 70 in. diagonal - READ THE ENTIRE MANUAL PRIOR TO USE Overall dimensions (H × W ): CAUTION: Do not use this product
  • Insignia NS-HTVMF0C | User Manual - Page 3
    FOR TVs 40-70 in. Tools needed You will need the following tools to assemble your new TV wall mount: ardware Edge-to-edge stud finder Socket wrench with 1/2 in. (13 mm) socket or adjustable wrench Pencil Awl Drill Phillips screwdriver Hammer Tape Measuring tape
  • Insignia NS-HTVMF0C | User Manual - Page 4
    NS-HTVMF0C TV Hardware Bag Label 2 3 4 5 6 Hardware Qty. Label TV Standoff 2 7 M6 × 12 × 2 3/4 in. lag bolt Lag bolt washer 2 Concrete Installation Kit CMK1 (not included) Contact customer service at 1-800-359-5520 to have these additional parts shipped directly to you. C1 2 5/16 in. ×
  • Insignia NS-HTVMF0C | User Manual - Page 5
    FIXED-POSITION WALL MOUNT FOR TVs 40-70 in. Installation instructions STEP 1 - Determining whether your TV has a flat back TV and do not block any jacks. You do not need spacers when assembling the wall mount. • Obstructed back: The brackets block one or more of the jacks on the back of your
  • Insignia NS-HTVMF0C | User Manual - Page 6
    NS-HTVMF0C STEP 2 - Select screws, washers, and spacers 1 Select the hardware for your TV (screws, washers, and spacers). A limited number of TVs come with mounting you encounter resistance, stop immediately and contact customer service. Use the shortest screw and spacer combination to accommodate
  • Insignia NS-HTVMF0C | User Manual - Page 7
    FIXED-POSITION WALL MOUNT FOR TVs 40-70 in. STEP 3 - Option 1: Attaching the mounting hardware to TVs with a flat back 1 Align the left and right TV brackets (1) with the upper screw holes on the back of the TV. Make
  • Insignia NS-HTVMF0C | User Manual - Page 8
    NS-HTVMF0C STEP 3 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs 1 Place spacers (9) over the screw holes on the back of the TV. 2 Align the left and right
  • Insignia NS-HTVMF0C | User Manual - Page 9
    FOR TVs 40-70 in. STEP 4 - Determine wall-mount location Note: • For more detailed information on determining where distance from the floor to where you want the bottom of the TV to be placed on the wall. Keep in mind that the bottom of the TV should be placed above any furniture (such as
  • Insignia NS-HTVMF0C | User Manual - Page 10
    NS-HTVMF0C STEP 5 - Option 1: Installing on a wood stud* wall Note: Any drywall covering the wall must not exceed 5/8 in. (16 mm). 1 Locate the stud. Verify the center of the stud with an edge-to-edge stud finder. 2 Align the center of the wall plate template (R) at the height (a + b - 1.5 in.) you
  • Insignia NS-HTVMF0C | User Manual - Page 11
    ) CAUTION:To prevent property damage or personal injury, never drill into the mortar between the blocks. Mount the wall plate directly onto the concrete surface. 1 Align the center of the wall plate template (R) at the height (a + b - 1.5 in.) you determined in the previous step, make sure that it
  • Insignia NS-HTVMF0C | User Manual - Page 12
    NS-HTVMF0C STEP 6 - Mounting the TV to the wall plate 1 Holding the TV with the top of the screen tilted toward the wall, slide the upper notches of the right and left TV brackets (1) over the upper lip of the wall plate (10). 2 Push the bottom of the TV toward the wall until the latch mechanism
  • Insignia NS-HTVMF0C | User Manual - Page 13
    FIXED-POSITION WALL MOUNT FOR TVs 40-70 in. Removing the TV from the wall plate • Pull down and hold both release straps, then pull the bottom of the TV away from the wall and lift the assembly off the wall plate. HEAVY! You will need assistance with this step. www.insigniaproducts.com 13
  • Insignia NS-HTVMF0C | User Manual - Page 14
    NS-HTVMF0C ONE-YEAR LIMITED WARRANTY Definitions: The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia the same amount of protection as the original packaging. To obtain warranty service, in the United States call 1-888-BESTBUY, Canada call 1-866-
  • Insignia NS-HTVMF0C | User Manual - Page 15
    WALL MOUNT FOR TVs 40-70 in. What does the warranty not cover? This warranty does not cover: • Food loss/spoilage due to failure of refrigerator or freezer • Customer instruction supply • Attempted repair by any person not authorized by Insignia to service the Product • Products sold "as is" or "with
  • Insignia NS-HTVMF0C | User Manual - Page 16
    Part Number: 6907-002106 00 www.insigniaproducts.com 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave. South, Richfield, MN 55423 U.S.A. ©2016 Best Buy.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

Safety information and specifications . . . . . 2
Tools needed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Package contents . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation instructions . . . . . . . . . . . . . . . . . . 5
For wood-stud, solid concrete wall, or
concrete block installations
Before using your new product, please read these instructions to prevent any damage.
FIXED-POSITION WALL MOUNT FOR
TVs 40-70 in.
NS-HTVMF0C
INSTALLATION GUIDE