Insignia NS-HTVMM1703-C User Guide
Insignia NS-HTVMM1703-C Manual
 |
View all Insignia NS-HTVMM1703-C manuals
Add to My Manuals
Save this manual to your list of manuals |
Insignia NS-HTVMM1703-C manual content summary:
- Insignia NS-HTVMM1703-C | User Guide - Page 1
INSTALLATION GUIDE Full Motion Mount for TVs 47" - 80" NS-HTVMM1703-C For VESA patterns: • 7.9 × 7.9" (200 × 200 mm) • 11.8 × 7.9" ( stud or concrete wall installations Safety information and specifications . . . . . 2 Tools needed 3 Package contents 3 Installation instructions 5 Before using - Insignia NS-HTVMM1703-C | User Guide - Page 2
For customer service, call: 1-877-467-4289 contractor. Insignia is not responsible for damage or injury caused by incorrect installation or use. The weight of your TV must not exceed 110 lbs. (50 kg). The wall must be capable of supporting five times the weight of your TV and wall mount combined - Insignia NS-HTVMM1703-C | User Guide - Page 3
3/16 in. (5 mm) wood drill bit (for wood stud wall) OR 3/8 in. (10 mm) masonry drill bit (for concrete wall) Package contents Make sure that you have all the hardware necessary to assemble your new TV wall mount: Wall Mount (1) TV Brackets (2) Wall Plate Template (1) www.insigniaproducts.com 3 - Insignia NS-HTVMM1703-C | User Guide - Page 4
TV Hardware Bag Label A1 A2 A3 A4 A5 A6 A7 Hardware M4 × 12 mm 4 A9 A10 A11 4 M8 × 50 mm screw Spacer 4 M4/M5 washer 4 A12 M6/M8 washer 4 NS-HTVMM1703-C Hardware Qty. Lag bolts 6 Concrete anchor 6 Lag bolt washer 6 Allen 1 wrench Box wrench 1 Magnetic removable bubble - Insignia NS-HTVMM1703-C | User Guide - Page 5
. See the documentation that came with your TV for instructions. 3 Lay the TV brackets, oriented vertically, on the back of your TV. 4 Align the screw holes in the TV brackets with the mounting screw holes on your TV. 5 Identify which type of back your TV has: • Flat back: The brackets lay flush - Insignia NS-HTVMM1703-C | User Guide - Page 6
NS-HTVMM1703-C STEP 2 - Select screws, washers, and spacers 1 Select the hardware for your TV (screws, washers, and spacers). A limited number of TVs come with mounting hardware included. (If there are screws that came with the TV, they are almost always in the holes on the back of the TV.) If you - Insignia NS-HTVMM1703-C | User Guide - Page 7
screws (A1, A3, A5, or A7) into the holes in the back of the TV. 3 Tighten the screws until they are snug against the TV brackets. Do not over tighten. A11 or A12 A1/A3 or A5/A7 Wall brackets You'll need Screws or or or A1 (4) A3 (4) A5 (4) Washers or A11 - Insignia NS-HTVMM1703-C | User Guide - Page 8
NS-HTVMM1703-C STEP 3 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs 1 Place spacers (A10) over the holes on the back of the TV. 2 Align the left and right TV brackets with the screw holes on the back of the TV. Make sure that the brackets are level. 3 Place - Insignia NS-HTVMM1703-C | User Guide - Page 9
is normally 40 to 60 in. from the ground. The center of your TV will be offset .8 in. lower than the center of the wall plate on the wall-mount. Before you drill holes in the wall: 1 Measure the distance from the bottom of your TV to the center point halfway between the top and bottom - Insignia NS-HTVMM1703-C | User Guide - Page 10
NS-HTVMM1703-C STEP 5 - Option 1: Installing on a wood stud* wall Note: Any drywall covering the wall must not exceed 5/8 in. (16 mm). 1 Locate the stud. Verify the center of the stud with an edge-to-edge stud finder. 2 Align the center of the wall plate template at the height (a + b) you - Insignia NS-HTVMM1703-C | User Guide - Page 11
Motion Mount for TVs 47" - 80" STEP 5 - Option 2: Installing on a solid concrete or concrete block wall CAUTION: To prevent property damage or personal injury, never drill into the mortar between blocks. Mount the wall plate directly onto the concrete surface. 1 Align the center of the wall plate - Insignia NS-HTVMM1703-C | User Guide - Page 12
STEP 6 - Install the decorative end caps • Snap a decorative end cap on each end of the wall plate. Decorative end cap NS-HTVMM1703-C You'll need Decorative end cap (2) 12 www.insigniaproducts.com - Insignia NS-HTVMM1703-C | User Guide - Page 13
into the notches on the upper lip of the wall-mount arm on the wall mount. 2 Push the bottom of the TV towards the wall until the latch mechanism clicks into place. 3 Press the magnetic ends on the TV brackets ribbons onto the mounting brackets. TV brackets HEAVY! You will need assistance with this - Insignia NS-HTVMM1703-C | User Guide - Page 14
NS-HTVMM1703-C STEP 8 - Manage cables 1 Snap the plastic covers onto the top and bottom edges of the wall plate. 2 Thread cables for 1 over the plastic covers. 3 Align the cables along the sides of the wall-mount arm, then snap the cable management clips 2 over the cables. Cable management clip - Insignia NS-HTVMM1703-C | User Guide - Page 15
Full Motion Mount for TVs 47" - 80" STEP 9 - Adjust the mount angle 1 To adjust the arm tension (to make the arm easier or harder to move), loosen or tighten the tension screw with an Allen wrench. 2 To rotate the TV left or right, hold the sides of the TV, then push one side while pulling the - Insignia NS-HTVMM1703-C | User Guide - Page 16
NS-HTVMM1703-C STEP 10 - Secure the TV to the wall plate • Press the TV brackets against the wall-mounting plate until they lock into place. To remove the TV from the wall mount, pull down on both ribbons on the bottom of the TV brackets to unlock the brackets, then lift the TV off the wall mount. - Insignia NS-HTVMM1703-C | User Guide - Page 17
Mount for TVs 47" - 80" ONE-YEAR LIMITED WARRANTY Definitions: The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia amount of protection as the original packaging. To obtain warranty service, in the United States call 1-888-BESTBUY, Canada call - Insignia NS-HTVMM1703-C | User Guide - Page 18
NS-HTVMM1703-C What does the warranty not cover? This warranty does not cover: • Food loss/spoilage due to failure of refrigerator or freezer • Customer instruction or power supply • Attempted repair by any person not authorized by Insignia to service the Product • Products sold "as is" or "with all - Insignia NS-HTVMM1703-C | User Guide - Page 19
1-877-467-4289 www.insigniaproducts.com INSIGNIA is a trademark of Best Buy and its affiliated companies Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2016 Best Buy. All rights reserved Made in China V6 ENGLISH 16-0801
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
 |
 |
Safety information and specifications . . . . . 2
Tools needed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Package contents . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation instructions. . . . . . . . . . . . . . . . . . . 5
For wood-stud or concrete
wall installations
Before using your new product, please read these instructions to prevent any damage.
Full Motion Mount for TVs 47" - 80"
NS-HTVMM1703-C
INSTALLATION GUIDE
For VESA patterns:
•
7.9 × 7.9" (200 × 200 mm)
•
11.8 × 7.9" (300 × 200 mm)
•
11.8 × 11.8" (300 × 300 mm)
•
15.7 × 7.9" (400 × 200 mm)
•
15.7 × 11.8" (400 × 300 mm)
•
15.7 × 15.7" (400 × 400 mm)
•
19.7 × 15.7" (500 × 400 mm)
•
23.6 × 15.7" (600 × 400 mm)