Insignia NS-HWG1965 User Guide

Insignia NS-HWG1965 Manual

Get Insignia NS-HWG1965 PDF manuals and user guides View all Insignia NS-HWG1965 manuals
Add to My Manuals
Save this manual to your list of manuals

Insignia NS-HWG1965 manual content summary:

  • Insignia NS-HWG1965 | User Guide - Page 1
    6 CARE AND MAINTENANCE 22 On-line Video Instruction Guides Go to www.guides.sellpoints.com to view step-by-step instructional videos for assembling and installing your product. Enter the following product number on the website. NS-HWG1965 Before using your new product, please read these
  • Insignia NS-HWG1965 | User Guide - Page 2
    NS-HWG1965 SAFETY INFORMATION AND SPECIFICATIONS CAUTION: The console's top work surface is designed may result in injury. The base of the television must be placed behind the stopper. See instructions for more details. CAUTION: This product contains small items that could be a choking hazard if
  • Insignia NS-HWG1965 | User Guide - Page 3
    Tools needed: TV Console for up to 75" TVs Hammer Phillips screwdriver Rubber mallet 3/8" drill bit Pliers PACKAGE CONTENTS: PARTS Make sure that you have all the parts necessary to assemble your new TV stand. Power drill A Top panel (1) Note: Keep the stopper template attached to the top
  • Insignia NS-HWG1965 | User Guide - Page 4
    NS-HWG1965 Qty. 4 P Cam pin 22 Y Knob bolt 4 Q Cam lock 22 Z Corner connector 2 Screw R M4 x 50 mm 6 AA Floor leveler 2 S Flat head screw M3.5 x 15 mm 12 BB CC Washer head screw T M3.5 x 15 mm 22 DD U Door stopper 2 EE V Cam lock cover 6 FF Shelf support
  • Insignia NS-HWG1965 | User Guide - Page 5
    TV Console for up to 75" TVs INSTALLATION TIPS Gluing wood dowels (N) When using a wood dowel (N), put one drop of glue (CC) in the hole before you insert the wood dowel (N). Insert the wood dowel (N), then gently tap it with a rubber mallet to secure it in place. 1 2 GLUE 3 4 FINAL X
  • Insignia NS-HWG1965 | User Guide - Page 6
    NS-HWG1965 ASSEMBLY INSTRUCTIONS Step 1: Screw cam pins onto the top panel, bottom shelf, and skirtings Tip: Assemble your stand on a carpeted floor or the empty TV stand carton
  • Insignia NS-HWG1965 | User Guide - Page 7
    TV Console for up to 75" TVs Step 2: Attach the back skirting between the side skirtings 1 Glue two wood dowels (N) into the drilled holes on the ends of the back skirting (G). Tip: See "Gluing wood dowels (N)" on page 5 for more information. 2 Attach the back skirting to the side skirtings (H and
  • Insignia NS-HWG1965 | User Guide - Page 8
    NS-HWG1965 Step 3: Attach the front skirting to the side skirtings 1 Glue two wood dowels (N) into the drilled holes on the front skirting (F). 2 Attach the front skirting (F)
  • Insignia NS-HWG1965 | User Guide - Page 9
    TV Console for up to 75" TVs Step 4: Attach the assembled base to the bottom shelf 1 Glue 10 wood dowels (N) into the drilled holes on the bottom shelf (E). 2 Position the assembled base onto the wood dowels (N) and cam pins (P) on the bottom shelf (E). Make sure that the pilot holes for the corner
  • Insignia NS-HWG1965 | User Guide - Page 10
    NS-HWG1965 Step 5: Install two floor levelers to the assembled base 1 Using the pilot holes as a guide, fasten two corner connectors (Z) to the joints where the front skirting (F) meet with the side skirtings (H and I) with eight 15 mm flat head screws (S). 2 Screw
  • Insignia NS-HWG1965 | User Guide - Page 11
    door stoppers to the top panel Note: Keep the stopper template attached to the top panel (A). • Using the pilot holes as a guide, attach two door stoppers (U) onto the front supports on the top panel (A) with two 15 mm flat head screws (S) per stopper. Make sure that the right angle sides of the
  • Insignia NS-HWG1965 | User Guide - Page 12
    NS-HWG1965 Step 7: Align and attach the side panels to the top panel 1 Glue two wood dowels (N) into the holes on the top edge of the left
  • Insignia NS-HWG1965 | User Guide - Page 13
    TV Console for up to 75" TVs Step 8: Attach the partition panel to the top panel 1 Glue two wood dowels (N) into the inner holes on the top edge of the partion panel (D). 2 Attach the partition panel to the top panel (A) by inserting two cam locks (Q) and tightening with a screwdriver. Door hinge
  • Insignia NS-HWG1965 | User Guide - Page 14
    NS-HWG1965 Step 9: Attach the bottom shelf to both side panels and partition panel 1 Glue six wood dowels (N) into the holes on the bottom edge of side
  • Insignia NS-HWG1965 | User Guide - Page 15
    TV Console for up to 75" TVs Step 10: Attach the back panel to the assembled console frame 1 Go back and tighten all cam locks and screws. Make sure that all the parts are tight and there are no gaps between the pieces. This will help keep the unit square. 2 Turn the assembled unit over so that its
  • Insignia NS-HWG1965 | User Guide - Page 16
    NS-HWG1965 Step 11: Attach adjustable shelves 1 Stand the assembled unit upright. 2 Insert the small and large cam lock covers (V and EE) into the cross slots on the visible cam locks on the vertical panels (B, C, and D). 3 Insert eight shelf supports (W) into the holes in the sides of the
  • Insignia NS-HWG1965 | User Guide - Page 17
    hinge arm for a better fit. Tip: If you need additional information on how to assemble the hinges, go to www.guides.sellpoints.com to view step-by-step instructional videos. Slot Hooks Mounting base Release lever Hinge arm You'll need: Push in the back of the hinge arm X (4) Y (4) Phillips
  • Insignia NS-HWG1965 | User Guide - Page 18
    NS-HWG1965 Step 13: Attach the bumpers to the door stoppers • Peel two bumpers (DD) from the bumper card and attach one to each door stopper (U) where it will contact the door (L). DD DD You'll need: DD (4) 18 www.insigniaproducts.com
  • Insignia NS-HWG1965 | User Guide - Page 19
    Console for up to 75" TVs Step 14: Attach the stopper to the top panel To prevent your TV from tipping, you must follow these instructions if you place a TV on top of your stand. Otherwise, skip to "Step 15: Change the door panel" on page 20. If your TV has
  • Insignia NS-HWG1965 | User Guide - Page 20
    NS-HWG1965 Step 15: Change the door panel Follow these steps if you want to change your TV stand's door panels from glass to wood. Otherwise, skip
  • Insignia NS-HWG1965 | User Guide - Page 21
    kit 1 Position the assembled stand against the wall where you plan to use it. 2 Adjust the leveling feet to level the TV stand. 3 Follow the instructions printed on the bag containing the tipping restraint hardware kit (GG) to attach the restraint hardware to the wall and the stand. WARNING: It is
  • Insignia NS-HWG1965 | User Guide - Page 22
    NS-HWG1965 following chart. Look out for: What can happen: How to avoid the problem: • Children climbing on the stand. • Risk of injury or death. the instructions. • Work from the bottom to the top when loading shelves. • The bottom shelves can only support 50 lbs. while the top can support
  • Insignia NS-HWG1965 | User Guide - Page 23
    become the property of Insignia and are not returned to you. If service of Products or parts are required after the Warranty Period expires, does the warranty not cover? This warranty does not cover: • Customer instruction/education • Installation • Set up adjustments • Cosmetic damage • Damage due
  • Insignia NS-HWG1965 | User Guide - Page 24
    1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com INSIGNIA is a trademark of Best Buy and its affiliated companies. Registered in some countries. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2020 Best Buy. All rights
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
USER GUIDE
SAFETY INFORMATION AND SPECIFICATIONS..2
PACKAGE CONTENTS: PARTS
...................................
3
PACKAGE CONTENTS: HARDWARE
.......................
4
ASSEMBLY INSTRUCTIONS
.......................................
6
CARE AND MAINTENANCE
...................................
22
TV Console for up to 75" TVs
NS-HWG1965
Before using your new product, please read these instructions to prevent any damage.
On-line Video Instruction Guides
Go to www.guides.sellpoints.com to view step-by-step instructional videos for assembling and
installing your product. Enter the following product number on the website.
NS-HWG1965