Insignia NS-HWMG1844 User Guide
Insignia NS-HWMG1844 Manual
 |
View all Insignia NS-HWMG1844 manuals
Add to My Manuals
Save this manual to your list of manuals |
Insignia NS-HWMG1844 manual content summary:
- Insignia NS-HWMG1844 | User Guide - Page 1
USER GUIDE Wood, Metal and Glass TV Stand for TVs up to 48" or 100 lbs. NS-HWMG1844 SAFETY INFORMATION AND SPECIFICATIONS.........2 PACKAGE CONTENTS: PARTS 3 PACKAGE CONTENTS: HARDWARE 4 ASSEMBLY INSTRUCTIONS 5 CARE AND MAINTENANCE 12 Before using your new product, please read these instructions - Insignia NS-HWMG1844 | User Guide - Page 2
NS-HWMG1844 SAFETY INFORMATION AND SPECIFICATIONS CAUTION: The top surface of this stand is designed for use with a product weighing no more than 100 lbs. (45.5 kg) and having a width that permits it to sit evenly on the stand with no more than a one-inch overhang on each side of the shelf. Use - Insignia NS-HWMG1844 | User Guide - Page 3
Tools needed: Wood, Metal and Glass TV Stand Phillips screwdriver Rubber mallet Drill PACKAGE CONTENTS: PARTS Make sure that you have all the parts necessary to assemble your new TV stand. Wood drill bit (3/16") 1 Top shelf (Qty. 1) 2 Left leg (Qty. 1) 3 Right leg (Qty. 1) 4 Middle frame ( - Insignia NS-HWMG1844 | User Guide - Page 4
have all the hardware necessary to assemble your new TV stand. How Hardware Qty. Label Hardware Qty. A Supports 2 WA Short wood screw (3.5 x 12 x 8 mm) 2 B Adhesive glass support 12 WB Long wood screw (4 x 25 x 8 mm) 2 C Wood dowel 1 WC Wall anchor 2 D Allen wrench 1 WD - Insignia NS-HWMG1844 | User Guide - Page 5
Wood, Metal and Glass TV Stand ASSEMBLY INSTRUCTIONS Step 1: Attach the supports and wood dowel Tip: Assemble your stand on a carpeted floor or the empty TV stand box to avoid scratching it. 1 Screw the two supports (A) into the lower frame (#5). 2 Glue a wood dowel (C) into the end of the back - Insignia NS-HWMG1844 | User Guide - Page 6
secure with an Allen wrench (D). Make sure that you connect the lower frame to the holes near the bottom of the TV stand with the supports facing outward. 2 Align the middle frame (#4) with the holes in the left and right legs (#2 and #3), then insert a spring washer (I) and a flat washer (J) onto - Insignia NS-HWMG1844 | User Guide - Page 7
Wood, Metal and Glass TV Stand Step 3: Attach the back panel Note: Do not fully tighten the bolts until the end of step 4. • Attach the back panel (#6) to the middle and lower frames (#4 and #5) with four long Allen bolts (F) and the Allen wrench (D). Make sure that the edge with the wood dowel - Insignia NS-HWMG1844 | User Guide - Page 8
NS-HWMG1844 Step 4: Attach the top shelf 1 Align the assembly with the top shelf (#1). Make sure that the assembly is aligned with the corners of the top shelf and that the wood dowel (in the back panel) is inserted into the top shelf. 2 Secure the legs (#2 and #3) with eight long Allen bolts (F) - Insignia NS-HWMG1844 | User Guide - Page 9
Wood, Metal and Glass TV Stand Step 5: Attach the glass supports 1 Flip the TV stand upright. 2 Peel off the 12 adhesive glass supports (B) and stick them onto the middle and lower frames (#4 and #5). Place six on each frame (three on the back and three on the front). You' - Insignia NS-HWMG1844 | User Guide - Page 10
Step 6: Insert the glass shelves • Slide the glass shelves (#7) onto the middle and lower frames (#4 and #5). NS-HWMG1844 10 www.insigniaproducts.com - Insignia NS-HWMG1844 | User Guide - Page 11
Wood, Metal and Glass TV Stand Step 7: Secure your TV stand to the wall 1 Attach two mounting brackets (WD) to the holes on the back of the TV stand's back panel with two short wood screws (WA) and a Phillips screwdriver. Make sure that the brackets face down (as shown). 2 Decide where you want to - Insignia NS-HWMG1844 | User Guide - Page 12
the following chart. Look out for: What can happen: How to avoid the problem: • Children climbing on the stand. • Risk of injury or death. • instructions. • Work from the bottom to the top when loading shelves. • The middle and bottom shelves can only support 50 lbs. while the top can support - Insignia NS-HWMG1844 | User Guide - Page 13
become the property of Insignia and are not returned to you. If service of Products or parts are required after the Warranty Period expires, does the warranty not cover? This warranty does not cover: • Customer instruction/education • Installation • Set up adjustments • Cosmetic damage • Damage due - Insignia NS-HWMG1844 | User Guide - Page 14
1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com INSIGNIA is a trademark of Best Buy and its affiliated companies. Registered in some countries. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2017 Best Buy. All rights
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
 |
 |
USER GUIDE
SAFETY INFORMATION AND SPECIFICATIONS
.........
2
PACKAGE CONTENTS: PARTS
..........................................
3
PACKAGE CONTENTS: HARDWARE
..............................
4
ASSEMBLY INSTRUCTIONS
..............................................
5
CARE AND MAINTENANCE
..........................................
12
Wood, Metal and Glass
TV Stand
for TVs up to 48” or 100 lbs.
NS-HWMG1844
Before using your new product, please read these instructions to prevent any damage.