Insignia NS-LCD37 User Manual (English) - Page 9

Insignia NS-LCD37 LCD TV Before connecting devices • Carefully check the terminals for position and type before making any connections. • The illustration of the external equipment may be different depending on your model. • Loose connectors can result in image or color problems. Make sure that all connectors are securely inserted into their terminals. • Refer to the user manual of the external device as well. • When connecting an external device, turn the power off on the panel to avoid any issues. Connecting headphones Connecting the antenna Optimum reception of color requires a good signal and generally means that an outdoor antenna must be used. The exact type and position of the antenna depends upon your particular area. Antenna input VGA RF Coaxial Cable (75 ohm) Headphones TV right side Wall antenna socket R S-232 TV left side To connect headphones: • Insert the headphone plug into the television's headphone jack. Warning To avoid hearing damage when using headphones, adjust the headphone volume to avoid excessive levels. Note The illustration may be different depending on model. Locating the television Install the television in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Note • • • We recommend that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave conditions. Do not bundle the antenna cable with the power cord. If you cannot install the antenna correctly, contact your dealer for assistance. Connecting digital optical audio Optical cable VGA Audio Processor S/PDIF IN (Optical) OR www.insignia-products.com Hi-fi System 7