Insignia NS-RMTEXB17 Important Information

Before using your new product, please read

these instructions to prevent any damage.

QUICK SETUP GUIDE

Insignia

Replacement

Remote

For

Insignia TVs

NS-RMTEXB17

PACKAGE CONTENTS

•

Replacement Remote Control for Insignia TVs

•

Quick Setup Guide

INSTALLING BATTERIES

•

Insert two AAA batteries

(not included) into the

remote. Make sure that

the + and – symbols

match the + and –

symbols in the battery compartment.

Note

: To set up your remote, follow the setup steps

below, in order, and STOP as soon as your remote works

correctly.

SETTING UP YOUR REMOTE

Your remote is compatible with any Insignia TV and

should work with most newer Insignia TVs without

requiring any setup. Insignia Smart TV functionality

usually works via the Menu keys. After you install

the batteries, test your remote. If the buttons work

correctly, your remote is ready to use.

If the buttons do not work, complete the

following steps:

1

Make sure that your TV is on and not in standby

mode.

2

On your remote, press and hold the red and blue

buttons until the

POWER

button blinks twice.

3

Point your remote towards the TV, then press and

hold

POWER

.

4

As soon as your TV turns off,

immediately

release the button

. The feedback button blinks

twice. You have three seconds to release the

button before your remote sends a different

signal (code) to your TV.

5

Use your remote to turn on your TV, then test

the other buttons. If all of the buttons work, your

remote is ready to use.

If some of the buttons still do not work,

complete the following steps:

1

Make sure that your TV is on and not in standby

mode.

2

On your remote, press and hold the red and blue

buttons until the feedback button on the top

right blinks twice.

3

Point your remote towards your TV, then press

and hold one of the buttons (such as

MENU

)

that is not working correctly.

4

As soon as the correct function (in this example,

MENU

) appears on your TV screen,

immediately

release the button

. The feedback button blinks

twice. You have three seconds to release the

button before your remote sends a different

signal (code) to your TV.

5

Test the rest of the buttons. If all of the buttons

work, your remote is ready to use.

6

If some of the buttons still do not work, repeat

the above steps for another non-working

button, then test the rest of the buttons. Repeat

until all the buttons work.

2 × AAA

LEARNING FUNCTIONS

Your remote can learn any function from your

original remote as long as the original remote works.

1

Place both remotes on a flat surface with the

infrared eyes facing each other.

Note

: If you have difficulty with the learning function, install

new batteries in both remotes and try the process again.

Make sure that the remote control “eyes” are pointing at each

other and are 1–2 inches (2.5–5 cm) apart.

2

On your remote, hold the green and yellow

buttons until the feedback button on the top

right blinks twice.

3

On your remote, press

975

. The feedback button

on the top right blinks twice.

4

On your new remote, press the button you want

to learn a new function (for example,

VOL+

).

5

On the original remote control, press the button

with the function you want to teach to the

button you pressed in Step 4.

If the feedback button blinks twice, your new

remote learned the function. You can repeat

steps 4 and 5 to add another function to your

new remote.

If the feedback button blinks one long blink,

your new remote did not learn the function.

Repeat steps 4 and 5.

6

After you teach your new remote all the

functions you want it to learn, press and hold

ENTER

for three seconds until the feedback

button blinks twice.

DELETING A LEARNED FUNCTION

1

Press and hold the green and yellow buttons

until the feedback button blinks twice.

2

Press

976.

3

Press the button you want to reset twice

(for example,

VOL+

). The feedback button

blinks twice and the button is reset to its

original function.

TROUBLESHOOTING

Feedback button does not blink when a

button is pressed.

•

Replace the batteries.

LEGAL NOTICES

FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

Caution

: Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

ONE-YEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA:

For customer service, call 1-877-467-4289

www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its affiliated

companies. Distributed by Best Buy Purchasing, LLC

7601 Penn Ave South, Richfield, MN 55423 U.S.A.

©2018 Best Buy. All rights reserved.

Made in China

V1 ENGLISH 18-0197

Original remote

New remote

FLAT SIZE: 11.24 × 4.33 in. (285.5 × 110 mm)

FINAL FOLDED SIZE: 1.87 × 4.33 in. (47.5 × 110 mm)

NS-RMTEXB17_18-0197_QSG_V1_EN.ai 1 5/24/2018 10:35:14 PM

NS-RMTEXB17_18-0197_QSG_V1_EN.ai

1

5/24/2018

10:35:14 PM

Insignia NS-RMTEXB17 Important Information

Insignia NS-RMTEXB17 Manual

Insignia NS-RMTEXB17 manual content summary: