Insignia NS-S6CCBK2 Quick Setup Guide
Insignia NS-S6CCBK2 Manual
 |
View all Insignia NS-S6CCBK2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Insignia NS-S6CCBK2 manual content summary:
- Insignia NS-S6CCBK2 | Quick Setup Guide - Page 1
Cut Shredder NS-S6CCBK2 / NS-S6CCBK2-C PACKAGE CONTENTS • Cross cut shredder with wastebasket • Quick Setup Guide FEATURES • Shreds up to six sheets of paper at one time • Destroys credit cards, small staples, Before using your new product, please read these instructions to prevent any damage. - Insignia NS-S6CCBK2 | Quick Setup Guide - Page 2
TROUBLESHOOTING My shredder isn't working. • Make sure that the power cord is plugged guide and become familiar with the safety information, operating instructions, and maintenance requirements. Follow all warnings and instructions in the guide and as marked on the shredder. Do not attempt to service
-
1 -
2
 |
 |
SETTING UP YOUR SHREDDER
1
Place the wastebasket upright on a level surface.
2
Attach the shredder head to the basket. Make sure that it
fits correctly.
Note
: Do not use plastic bags to line the wastebasket.
3
Connect the power cord to a power outlet. Do not use an
extension cord.
USING YOUR SHREDDER
1
Slide the power switch to
AUTO
.
2
Insert paper (up to six pages) or one credit card into the
shredding slot. Your shredder automatically shreds what
you insert.
Note
: Don’t put envelopes, adhesive material, newsprint,
transparencies, laminated documents, continuous forms,
cardboard, or hard and plastic materials (except credit cards)
through the shredder. You can shred small staples and small
paper clips, if they are attached to the paper you are shredding.
3
If the shredder jams, slide the switch to
REV
to return the
paper, then slide the switch to
AUTO
. The shredder can be
used again when the jam is cleared.
4
When the wastebasket is 2/3 full, slide the switch to
OFF
,
unplug the cord from the power outlet, then lift off the
shredder head and empty the wastebasket.
PACKAGE CONTENTS
• Cross cut shredder with wastebasket
•
Quick Setup Guide
FEATURES
• Shreds up to six sheets of paper at one time
• Destroys credit cards, small staples, and small paper clips
• Cross-cut size .2 × 1.3 in. (5 × 34 mm) protects sensitive data
• 3.2 gal. (12 l) capacity wastebasket holds shredded waste and
is easy to empty
Before using your new product, please read these instructions to prevent any damage.
QUICK SETUP GUIDE
6-Sheet Cross
Cut Shredder
NS-S6CCBK2 / NS-S6CCBK2-C
AUTO
REV
#
ITEM
1
Handle
2
Shredding
slot
3
LED
indicators
4
Switch
5
Window
6
Wastebasket
DESCRIPTION
Lets you easily lift up the shredder head
to empty the paper inside the
wastebasket . Make sure that your
shredder is turned off before you move it.
Insert up to six sheets of paper at a time
or one credit card at a time.
Overheat
: Lights when your shredder
has overheated. When overheated, the
shredder stops shredding. After 30
minutes, the indicator turns off and the
shredder can shred again.
Power
: Lights when your shredder is in
use.
FWD
: Sends an item through your
shredder. The Power indicator lights
green.
Note
: When you slide the power switch to
FWD
, the cutters run forward continuously. To
stop the cutters, you have to move the switch
to a different position.
Only use
FWD
to make sure that the
remaining paper in the slot gets shredded or
that you want to clear the slot.
AUTO
: Automatically shreds an item
when inserted into the shredding slot.
The Power indicator lights green. After
shredding, the shredding stops
automatically.
OFF
: Turns off your shredder.
REV
: Reverses the paper in the slot to
clear a jam or remove unshredded paper.
The power indicator light turns green
when REV is being used, similar to FWD.
Let you see how much shredded material
is in the wastebasket.
Holds the paper and credit cards that you
have shredded. Empty the basket when it
is 2/3 full.
Overheat
Power
FWD
REV
OFF
AUTO
Switch
LED indicators