Insignia NS-SB212 Template (English)

799 mm

88 mm

Hold this template to the wall and use a level to

level it, then temporarily tape it to the wall.

Drill two holes at the indicated points.

Wall

Wall

Anchor

Wall

Wall

Soundbar

6 to 8 mm

(1/4 inches)

Remove the template from the wall.

You must use suitable wall anchors (not supplied) if

you are mounting on drywall, concrete, or other wall

types.

Fasten two screws (not supplied) to the wall. The

screw heads should protrude from the wall

approximately 1/4 in. (6-8 mm).

The screw width must be about 3/16" and the

screw head about 1/4" to 3/8".

Align the speaker hanging brackets with the screws,

then hang the soundbar on the screws.

406.4 mm

12-0293

Drill a hole here

LEVELING EDGE

Hold a level to the Leveling Edge of this template

LEVELING EDGE

Drill a hole here

Wall mount template

Locate / Position holes onto studs behind drywall or use anchors for mounting

Warning:

Improper installation can result in serious injury or damage to your soundbar.

If necessary, seek the assistance of a professional.