Insignia NS-UVBL1 User guide

Insignia NS-UVBL1 Manual

Get Insignia NS-UVBL1 PDF manuals and user guides View all Insignia NS-UVBL1 manuals
Add to My Manuals
Save this manual to your list of manuals

Insignia NS-UVBL1 manual content summary:

  • Insignia NS-UVBL1 | User guide - Page 1
    USER GUIDE Bagless Upright Vacuum Cleaner NS-UVBL1 Before using your new product, please read these instructions to prevent any damage.
  • Insignia NS-UVBL1 | User guide - Page 2
    Cleaning the exhaust filter 15 Cleaning the roller brush 16 Replacing the roller brush 17 Replacing the drive belt 19 Cleaning the pet tool 21 Troubleshooting 23 Specifications 24 ONE-YEAR LIMITED WARRANTY - INSIGNIA 25 2 www.insigniaproducts.com
  • Insignia NS-UVBL1 | User guide - Page 3
    are important operating and maintenance instructions in the literature accompanying your vacuum. SAFETY GUIDELINES - DEFINITIONS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are
  • Insignia NS-UVBL1 | User guide - Page 4
    If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons, in order to avoid a hazard. • DO NOT on dry, indoor surfaces. • DO use only as described in this manual. • DO use only manufacturer's recommended attachments. • DO keep the power
  • Insignia NS-UVBL1 | User guide - Page 5
    product identification plate. If this appliance is used by a third party: • DO supply the instruction manual with it. • No liability can be accepted for any damage caused by non-compliance with these instructions or any other improper use or mishandling of the appliance. • This product has not been
  • Insignia NS-UVBL1 | User guide - Page 6
    (9.1 m) power cord and a 7 ft (2.1 m) flexible suction hose work together to help you clean more efficiently Package contents • Upright vacuum • 3-in-1 crevice tool • Pet tool • User Guide 6 www.insigniaproducts.com
  • Insignia NS-UVBL1 | User guide - Page 7
    are correctly and firmly installed before using. WARNING: Make sure that you have completely assembled your vacuum per the following instructions and are familiar with all instructions and operating procedures prior to plugging in your vacuum. 1 Press the dust cup release button, then pull out on
  • Insignia NS-UVBL1 | User guide - Page 8
    2 Insert the handle into the vacuum body, then install the screw through the handle and into the body. Handle Screw Important: The handle must be installed before replacing the dust cup. 3 Reinstall the dust cup back onto the vacuum (1) and push it toward the handle (2) until it clicks into place.
  • Insignia NS-UVBL1 | User guide - Page 9
    Bagless Upright Vacuum Cleaner 5 Insert the 3-in-1 crevice tool into the on-board storage bracket. 3-in-1 crevice tool Using your vacuum 1 Rotate the quick-release cord bracket to release the power cord. Quick-release cord bracket 2 Step on the brush cover (1) and pull back on the handle (2) to
  • Insignia NS-UVBL1 | User guide - Page 10
    3 Plug in the power cord, then push the ON/OFF button to turn on your vacuum. ON/OFF button Tip: To maintain optimal performance, empty the dust cup when debris reaches the MAX FILL line. Using the hose handle Remove the hose handle from the hose connector and use it to pick up small items. Hose
  • Insignia NS-UVBL1 | User guide - Page 11
    Bagless Upright Vacuum Cleaner 3 Remove the brush from the narrow crevice tool to use the narrow tool alone. Or remove the narrow tool from the hose handle and fit the brush to the end of the hose handle to use the brush by itself. Using the pet tool WARNING: Do not use the pet hair tool directly on
  • Insignia NS-UVBL1 | User guide - Page 12
    any maintenance. • Do not clean the vacuum cleaner, components, or accessories using solvents, abrasives, or any flammable liquid. • Unless otherwise instructed, clean only the outside of the vacuum cleaner. Use only a moist cloth and mild detergent for cleaning the vacuum cleaner, components, and
  • Insignia NS-UVBL1 | User guide - Page 13
    Bagless Upright Vacuum Cleaner 2 Hold the dust cup over a trash can, then release the lock on the bottom of the cup and let the contents empty. Dust cup lock 3 Open the top of the dust cup to expose the foam dust cup filter. 4 Remove the foam dust cup filter. Foam dust cup filter www.
  • Insignia NS-UVBL1 | User guide - Page 14
    5 Gently hand wash the foam dust cup filter under running water once a week (if suction drops distinctly, we recommend prompt cleaning). Let the foam dust cup filter dry for 24 hours. 6 With the foam dust cup filter still removed, twist the filter assembly counterclockwise to remove it. Filter
  • Insignia NS-UVBL1 | User guide - Page 15
    Bagless Upright Vacuum Cleaner Cleaning the lower tube CAUTION: If the filter or hose is clogged, the motor may shut down to protect itself from overheating. If this occurs, unplug the vacuum, clean the exhaust filter, and inspect the hoses and canister for clogging. Allow several hours for the unit
  • Insignia NS-UVBL1 | User guide - Page 16
    3 Wash the exhaust filter under running water every three months, then let it dry for 24 hours. 4 Replace the exhaust filter and cover when the filter is completely dry. Push the lock to the right to secure the exhaust filter cover. LOCK Cleaning the roller brush 1 Tilt the vacuum back until the
  • Insignia NS-UVBL1 | User guide - Page 17
    Bagless Upright Vacuum Cleaner Replacing the roller brush We recommend that you check your vacuum cleaner's roller brush and drive belt regularly for wear or damage. You should also clean the brush and brush ends by removing string, hair, and carpet fibers. (See Cleaning the roller brush on page 16
  • Insignia NS-UVBL1 | User guide - Page 18
    5 Grasp the roller brush at both ends and remove it by lifting it out of the vacuum body. 6 Remove any string, hair, or other debris from the roller brush, motor pulley, and drive belt. 7 Check the roller brush for worn areas and replace if needed. 8 Check the air passageway for obstructions and
  • Insignia NS-UVBL1 | User guide - Page 19
    Bagless Upright Vacuum Cleaner Replacing the drive belt Check the drive belt carefully for wear, cuts, and stressed areas. If the drive belt appears worn, you should replace it. 1 Turn off and unplug your vacuum. 2 Place your vacuum upside down with the roller brush facing upwards. 3 Remove the six
  • Insignia NS-UVBL1 | User guide - Page 20
    5 Grasp the old drive belt and remove it from the motor shaft. Discard the old drive belt. Drive belt 6 Loop the new drive belt over the motor shaft and stretch the other end over the floor brush in the space provided between the bristles. 7 Place the ends of the roller brush down into the slots on
  • Insignia NS-UVBL1 | User guide - Page 21
    Bagless Upright Vacuum Cleaner 9 Replace the brush cover by reinstalling the six retaining screws. Cleaning the pet tool 1 Rotate, unlock, and remove the plastic locking ring to release the transparent plastic upper cover of the pet tool. Locking ring 2 Pull up the plastic upper cover of the pet
  • Insignia NS-UVBL1 | User guide - Page 22
    3 Remove the plastic upper cover of the pet tool, then clean the roller brush and other parts of the tool. 4 Reassemble the pet tool and replace the plastic locking ring. 22 www.insigniaproducts.com
  • Insignia NS-UVBL1 | User guide - Page 23
    Bagless Upright Vacuum Cleaner Troubleshooting PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION My vacuum cleaner No power. doesn't work. • Make sure that the power cord is plugged in. • Make sure that the electrical
  • Insignia NS-UVBL1 | User guide - Page 24
    Specifications Height Weight Power requirements Suction power Power cord length Cleaning path Certifications 42.3 in. (107.4 cm) 9.1 lbs. (4.1 kg) 120 V 60 Hz 8 A 72 W 30 ft. (9.1 m) 11.5 in. (29.2 cm) UL 24 www.insigniaproducts.com
  • Insignia NS-UVBL1 | User guide - Page 25
    become the property of Insignia and are not returned to you. If service of Products or parts are required after the Warranty Period expires, does the warranty not cover? This warranty does not cover: • Customer instruction/education • Installation • Set up adjustments • Cosmetic damage • Damage due
  • Insignia NS-UVBL1 | User guide - Page 26
    operation or maintenance • Connection to an incorrect voltage or power supply • Attempted repair by any person not authorized by Insignia to service the Product • Products sold "as is" or "with all faults" • Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.) • Products
  • Insignia NS-UVBL1 | User guide - Page 27
    www.insigniaproducts.com 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2021 Best Buy. All rights reserved. V2 ENGLISH 20-0539
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
Before using your new product, please read these instructions to prevent any damage.
Bagless Upright Vacuum
Cleaner
NS-UVBL1
USER GUIDE