Insignia NSRSW211 Quick Setup Guide (English)

Quick Setup Guide

NS-RSW211 Rocketboost Wireless Subwoofer

Congratulations on your purchase of a

high-quality Insignia product. Your Wireless

Subwoofer represents the state of the art in

powered subwoofers and is designed for

reliable and trouble-free performance. Use this

guide for initial setup of your Wireless

Subwoofer. See your

User Guide

for more

information on using your Wireless Subwoofer.

Package contents

•

NS-RSW211 Wireless Subwoofer

•

User Guide

•

Quick Setup Guide

Connecting your subwoofer

Connecting the power

1

Plug the AC power cord into a 120 V wall outlet.

2

Click the

Power

switch to the right to turn on the wireless subwoofer.

The power indicator turns on.

Deciding on wired or wireless mode

This product can be used as a standard wired subwoofer or you can upgrade to wireless when the

subwoofer is used with other Rocketboost products. For wired mode, see the next section below. If you

want to setup the subwoofer in wireless mode, see that section in the next column. For more details on

using wireless mode with other Rocketboost product, see your

User Guide

.

Setting up and using your subwoofer in wired mode

Your subwoofer can be used as a standard wired subwoofer with most AV receivers.

Connecting your subwoofer for wired mode

1

Connect the subwoofer output of your receiver to the Aux input of the subwoofer using a subwoofer

cable.

2

Make sure that the

INPUT SELECT

switch on the subwoofer is set to

Aux

(wired).

Setting the low pass filter

Setting the low pass filter lets you select the frequency range of the sound that your subwoofer will

reproduce and amplify. Turning the knob counterclockwise to

80 Hz

sets the subwoofer to reproduce

frequencies lower than 80 Hz. Turning the knob clockwise to

150 Hz

sets it to reproduce frequencies lower

than 150 Hz. The best setting depends on the other speakers you are using with the subwoofer. If you are

unsure of the best setting, set this at

150 Hz

.

Listening to music and setting the volume

1

Turn on your subwoofer and audio source and play music or a movie that you can easily hear the bass

sound on.

2

Adjust the volume level on your wireless subwoofer by turning the volume knob clockwise or

counterclockwise. The level should be set so that the bass volume level best matches the volume level

of the rest of your audio system.

Once you have set this volume level you can leave it at this setting. The subwoofer volume will then

automatically adjust when you change the volume of your audio source.

Setting up and using your subwoofer in wireless mode

How does Rocketboost work?

Rocketboost technology can connect all audio devices throughout your home to form a home audio

network.

Rocketboost products include “Senders,” which send or transmit audio streams, and “Receivers,” which

receive the audio. This lets you listen to music from your Sender in other rooms using your Receiver.

For a wireless subwoofer application, the wireless subwoofer is a Rocketboost receiver. A Rocketboost

sender device needs to be connected to your AV receiver or other audio source to send the subwoofer

channel to the wireless subwoofer.

Example configuration

Setting up your subwoofer for wireless operation depends on the audio product that you want to use your

subwoofer with. For example, you can use the subwoofer with your AV receiver, a Rocketboost-compatible

soundbar, or even directly with your Rocketboost compatible TV. For additional information on wireless

setup for those products, see the user guides for those products.

The example below shows a typical AV receiver, connected to an RF-RBUSB Rocketboost wireless sender,

connected wirelessly to the subwoofer (this solution is compatible with most AV receivers):

Typical AV Receiver + RF-RBUSB Rocketboost wireless sender/receiver

Connecting your subwoofer for wireless mode

IMPORTANT

: Every Rocketboost network must contain one hub device, which helps devices join the

network. The network can have only one hub, which you can enable using the hub switch on the back of all

Rocketboost senders and wireless sender/receivers.

The wireless subwoofer is a Rocketboost wireless receiver and is not a hub device. To add this wireless

receiver to your Rocketboost network, you need to join it to your hub device. This section describes the

joining process.

To establish communication:

1

Press the

Power

button on the Rocketboost hub device to turn it on.

2

Make sure that the

INPUT SELECT

switch on the subwoofer is set to

Wireless

.

3

Make sure that the power switch on your subwoofer is turned on. If the power indicator is red (Standby

mode), briefly press the

CONNECT

button to turn on your subwoofer (the power indicator turns blue).

4

Press and hold the

Power

button on the Rocketboost hub device for more than three seconds to put it

into joining mode. The power indicator starts blinking rapidly and the unit will stay in joining mode for

30 seconds.

Insignia NSRSW211 Quick Setup Guide (English)

Insignia NSRSW211 Manual

Insignia NSRSW211 manual content summary: