Intel BLKDX58OG Product Specification - Page 27
Hardware Management Subsystem
View all Intel BLKDX58OG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Product Description 1.11 Hardware Management Subsystem The hardware management features enable the board to be compatible with the Wired for Management (WfM) specification. The board has several hardware management features, including the following: • Fan monitoring and control • Thermal and voltage monitoring • Chassis intrusion detection 1.11.1 Hardware Monitoring and Fan Control The features of the hardware monitoring and fan control include: • Fan speed control controllers and sensors provided by the Hardware Monitoring and Fan Control ASIC • Thermal sensors in the processor, 82X58 IOH, and 82801IJR ICH10R • Power supply monitoring of five voltages (+12 V, +5 V, +3.3 V, V_SM and +VCCP) to detect levels above or below acceptable values • Thermally monitored closed-loop fan control, for all three fans, that can adjust the fan speed or switch the fans on or off as needed 1.11.2 Fan Monitoring Fan monitoring can be implemented using Intel® Desktop Control Center or third-party software. For information about The functions of the fan headers Refer to Section 1.12.2.2, page 34 1.11.3 Chassis Intrusion and Detection The board supports a chassis security feature that detects if the chassis cover is removed. The security feature uses a mechanical switch on the chassis that attaches to the chassis intrusion header. When the chassis cover is removed, the mechanical switch is in the closed position. For information about The location of the chassis intrusion header Refer to Figure 11, page 43 27