Intel BLKDX58OG Product Specification - Page 56
Electrical Considerations
View all Intel BLKDX58OG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Intel Desktop Board DX58OG Technical Product Specification 2.5 Electrical Considerations 2.5.1 Power Supply Considerations CAUTION The +5 V standby line from the power supply must be capable of providing adequate +5 V standby current. Failure to do so can damage the power supply. The total amount of standby current required depends on the wake devices supported and manufacturing options. Additional power required will depend on configurations chosen by the integrator. The power supply must comply with the indicated parameters of the ATX form factor specification. • The potential relation between 3.3 VDC and +5 VDC power rails • The current capability of the +5 VSB line • All timing parameters • All voltage tolerances For example, for a system consisting of a supported 130 W processor (see section 1.4 on page 16 for a list of supported processors), 1 GB DDR3 RAM, one high end video card, one hard disk drive, one optical drive, and all board peripherals enabled, the minimum recommended power supply is 460 W. Table 26 lists the recommended power supply current values. Table 26. Recommended Power Supply Current Values Output Voltage 3.3 V 5 V 12 V1 12 V2 -12 V Current 22 A 20 A 16 A 16 A 0.3 A 5 VSB 1.5 A For information about Selecting an appropriate power supply Refer to http://support.intel.com/support/motherboards/desktop/sb /CS-026472.htm 56