Intel D845GLAD Product Guide - Page 17
Hardware Management, Power Connectors, Fan Connectors, Resume on Ring, Wake from USB - desktop board
UPC - 735858153386
View all Intel D845GLAD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Desktop Board Features CAUTION Power supplies used with this board must be able to provide enough standby current to support the standard Instantly Available (ACPI S3 sleep state) configuration. If the standby current necessary to support multiple wake events from the PCI and/or USB buses exceeds power supply capacity, the Intel desktop board may lose register settings stored in memory. For more information on standby current requirements for these desktop boards, refer to the TPS by selecting the Technical Documentation link at: http://developer.intel.com/design/motherbd/ Hardware Management • Power connectors • Fan connectors • Resume on Ring • Wake from USB • Wake from PS/2 keyboard/mouse • PME# wake up support Power Connectors Desktop Boards D845GLLY and D845GLAD have two power connectors. See Figure 14 on page 62 for the location of the power connectors. Fan Connectors Desktop Boards D845GLLY and D845GLAD have two chassis fan connectors and one processor fan connector. See Figure 14 on page 62 for the location of the fan connectors. Resume on Ring The operation of Resume on Ring can be summarized as follows: • Resumes operation from either ACPI S1 or ACPI S3 state • Requires only one call to access the computer • Detects incoming call similarly for external and internal modems • Requires modem interrupt be unmasked for correct operation Wake from USB USB bus activity wakes the computer from an ACPI S1 or S3 state. ✏ NOTE Wake from USB requires the use of a USB peripheral that supports Wake from USB. The front panel USB wake configuration jumper must be set for front panel USB operation. See page 27 for jumper settings. 17