Intel D845GLAD Product Guide - Page 7

1 Desktop Board Features ✏ NOTE Intel®Desktop Board D845GLAD layout was used for illustrations unless otherwise noted. Table 1 describes the major features of Intel®Desktop Boards D845GLLY and D845GLAD. Table 1. Feature Summary Form Factors Processor Memory • microATX at 9.2 inches by 8.2 inches Support for: • 400 MHz front side bus (FSB) Intel® Pentium® 4 processor in an mPGA-478 socket • 400 MHz FSB Intel® Celeron® processor in an mPGA-478 socket • Two DIMM sockets defined as: - 168-pin, 3.3 V, PC133 SDRAM interface (Desktop Board D845GLLY) - 184-pin, 2.5 V, DDR266/200 MHz SDRAM interface (Desktop Board D845GLAD) • Designed to support up to 2 GB of system memory Chipset I/O Control LAN (optional) Graphics Audio NOTE: Desktop Boards D845GLLY and D845GLAD have been designed to support DIMMs based on 512 Mbit technology up to 2 GB, but this technology has not been validated on these Intel® desktop boards. For more information about the latest list of tested memory, refer to the Intel World Wide Web site at: http://support.intel.com/support/motherboards/desktop/ Intel® 845GL chipset, consisting of: • Intel® 82845 Graphics and Memory Controller Hub (GMCH) with Accelerated Hub Architecture (AHA) bus • Intel® 82801DB I/O Controller Hub (ICH4) with AHA bus with support up to four Hi-Speed Universal Serial Bus 2.0 (USB 2.0) ports • 4 Mbit Firmware Hub (FWH) • SMSC LPC47M102S-MC low pin count (LPC) interface I/O controller • Intel® 82562ET 10/100 Mbit/sec Platform LAN Connect (PLC) device and RJ-45 connector • Intel 845GL chipset • Integrated Intel® Extreme Graphics • Intel 845GL chipset (AC '97) • Sigmatel audio codec continued 7