Intel D915GMH English Manual Product Guide
Intel D915GMH Manual
 |
View all Intel D915GMH manuals
Add to My Manuals
Save this manual to your list of manuals |
Intel D915GMH manual content summary:
- Intel D915GMH | English Manual Product Guide - Page 1
Intel® Desktop Board D915GMH Product Guide Balanced Technology Extended (BTX) Form Factor Board Order Number: C68427-001 - Intel D915GMH | English Manual Product Guide - Page 2
Intel® Desktop Board D915GMH Product Guide. Date July 2004 If an FCC declaration of conformity marking is present on the board in accordance with the instructions, may cause harmful interference intel.com/ or by calling 1-800-548-4725. Intel, Pentium, and Celeron are registered trademarks of Intel - Intel D915GMH | English Manual Product Guide - Page 3
Preface This Product Guide gives information about board layout, component installation, BIOS updates, and regulatory requirements for Intel® Desktop Board D915GMH. Intended Audience The Product Guide is intended for technically qualified personnel. It is not intended for general audiences. - Intel D915GMH | English Manual Product Guide - Page 4
) MHz Megahertz (one million hertz) Box Contents • Intel Desktop Board • BTX I/O shield • One ATA100/66 IDE cable • One floppy cable • Two SATA cables • One diskette drive cable • One VGA port cover • Audio port covers • Quick Reference Guide • Configuration and battery caution statement label - Intel D915GMH | English Manual Product Guide - Page 5
1 Desktop Board Features 9 Manufacturing Options ...11 Supported Operating Systems 11 Desktop Board Components 12 Processor ...14 Main Memory ...15 Intel® 915G Express Chipset 16 Graphics Subsystem ...16 Audio Subsystem ...16 Input/Output (I/O) Controller 17 LAN Subsystem ...17 LAN Subsystem - Intel D915GMH | English Manual Product Guide - Page 6
Intel Desktop Board D915GMH Product Guide Installing and Removing the Desktop Board 29 Installing and Removing a Processor 30 Installing a Processor 30 Connecting the Processor Fan Heat Sink Cable 33 Removing the Processor 33 Installing and Removing Memory 34 Installing DIMMs...36 Removing - Intel D915GMH | English Manual Product Guide - Page 7
3. Installing the I/O Shield 28 4. Desktop Board D915GMH Mounting Screw Hole Locations 29 5. Lift Socket Lever...30 6. Lift the Load Plate and Don't Touch the Socket Contacts 30 7. Remove the Protective Socket Cover 31 8. Remove the Processor from the Protective Processor Cover/Do Not Touch 31 - Intel D915GMH | English Manual Product Guide - Page 8
Board D915GMH Product Guide 26. Back Panel Connectors (with Five Audio Ports 52 27. Back Panel Connectors (with Three Audio Ports 53 28. Removing the Battery ...57 Tables 1. Feature Summary...9 2. Manufacturing Options 11 3. Desktop Boards D915GMH Components 13 4. Desktop Board D915GMH Memory - Intel D915GMH | English Manual Product Guide - Page 9
Board D915GMH. Table 1 summarizes the major features of the desktop board. Table 1. Feature Summary Form Factor Processor Main Memory Chipset Graphics Audio Expansion Capabilities Peripheral Interfaces uBTX (10.5-inches by 10.4-inches) Support for an Intel® Pentium® 4 processor in the LGA775 - Intel D915GMH | English Manual Product Guide - Page 10
of range values Security (Optional) Trusted Platform Module (optional) Related Links: For more information about Intel Desktop Board D915GMH, including the Technical Product Specification (TPS), BIOS updates, and device drivers, go to: http://support.intel.com/support/motherboards/desktop/ 10 - Intel D915GMH | English Manual Product Guide - Page 11
Options Table 2 shows the manufacturing options for desktop board D915GMH. Table 2. Manufacturing Options Option LAN Gigabit LAN Description • Intel® 82562EZ 10/100 Mbit/sec Platform LAN Connect (PLC) device with RJ-45 connector • Intel 82801FB I/O Controller Hub (ICH6) • Realtek 880 codec - Intel D915GMH | English Manual Product Guide - Page 12
Desktop Board D915GMH Product Guide Desktop Board Components Figure 1 shows the approximate location of the major components on desktop board D915GMH. Line In RJ45 A BC D W E V U T S Intel R 82801 (ICH) F G Intel R 82915G R (GMCH) H I J Q K P O NM L OM17178 Figure 1. Desktop - Intel D915GMH | English Manual Product Guide - Page 13
about: • Intel Desktop Board D915GMH http://www.intel.com/design/motherbd http://support.intel.com/support/motherboards/desktop • Supported processors • Audio software and utilities • LAN software and drivers http://support.intel.com/support/motherboards/desktop http://www.intel.com/design - Intel D915GMH | English Manual Product Guide - Page 14
to the Intel desktop board through the LGA775 socket. The supported processors list for desktop board D915GMH is located on the web at: http://support.intel.com/support/motherboards/desktop/ Related Links: Go to the following links or pages for more information about: • Instructions on installing - Intel D915GMH | English Manual Product Guide - Page 15
up. The BIOS will attempt to configure the memory controller for normal operation. Desktop board D915GMH supports dual or single channel memory configurations defined in Table 4. Table 4. Desktop Board D915GMH Memory Configurations Memory Speed DDR 400 Processor Pentium 4 processor DDR 333 - Intel D915GMH | English Manual Product Guide - Page 16
Intel Desktop Board D915GMH Product Guide Intel® 915G Express Chipset The Intel 915G Express Chipset consists of the following devices: • Intel 82915G Graphics and Memory Controller Hub (GMCH) with Digital Media Interface • Intel 82801FB I/O Controller Hub (ICH6) or Intel 82801FR I/O Controller Hub - Intel D915GMH | English Manual Product Guide - Page 17
Subsystem Software For LAN software and drivers, refer to the D915GMH link on Intel's World Wide Web site at: http://support.intel.com/support/motherboards/desktop RJ-45 LAN Connector LEDs Two LEDs are built into the RJ-45 LAN connector. Table 5 describes the LED states when the board is powered up - Intel D915GMH | English Manual Product Guide - Page 18
Intel Desktop Board D915GMH Product Guide Table 6 describes the LED states when the board is powered up and the 10/100/1000 Gigabit Ethernet LAN subsystem is operating. Table 6. RJ-45 10/100/1000 Gigabit Ethernet LAN Connector LEDs LED Color Bi-color LED Green LED State Off Green Yellow Off On ( - Intel D915GMH | English Manual Product Guide - Page 19
Desktop Board Features Expandability The desktop board supports the following: • One PCI Express x16 add-in card • One PCI Express x1 add-in card • Two PCI bus add-in cards Related Links: For information about installing the PCI Express x16 card, see page 38 in Chapter 2. BIOS The BIOS provides the - Intel D915GMH | English Manual Product Guide - Page 20
Intel Desktop Board D915GMH Product Guide Chassis Intrusion The board supports a chassis security feature that detects if the chassis cover has been removed. The security feature uses a mechanical switch on the chassis that can be connected to the chassis intrusion header on the desktop board. See - Intel D915GMH | English Manual Product Guide - Page 21
Desktop Board Features full speed if it is not a self controlled fan. It is recommended that processor fan speed control remain enabled (default BIOS setting) when using the processor fan heat-sink included with Intel® boxed processors. Disabling the chassis fan speed control results in chassis fans - Intel D915GMH | English Manual Product Guide - Page 22
Intel Desktop Board D915GMH Product Guide OM17190 Figure 2. Location of Standby Power Indicator Related Links: For more information on standby current requirements for the desktop board, refer to the TPS by selecting the Technical Documentation link at: http://developer.intel.com/design/motherbd/ - Intel D915GMH | English Manual Product Guide - Page 23
RAM and the clock current when the computer is turned off. Go to page 53 for instructions on how to replace the battery. Real-Time Clock The desktop board has a time-of-day clock and 100-year calendar. The battery on the desktop board keeps the clock current when the computer is turned off. 23 - Intel D915GMH | English Manual Product Guide - Page 24
Intel Desktop Board D915GMH Product Guide 24 - Intel D915GMH | English Manual Product Guide - Page 25
the BTX I/O shield • Install and remove the desktop board • Install and remove a processor and memory • Install and remove a PCI Express x16 card • Connect the IDE and Serial ATA cables • Connect internal headers • Set up audio • Connect fans and power cables • Locate other connectors • Set the BIOS - Intel D915GMH | English Manual Product Guide - Page 26
Intel Desktop Board D915GMH Product Guide Installation Precautions When you install and test the Intel desktop board, observe all warnings and cautions in the installation instructions. To avoid injury, be careful of: • Sharp pins on connectors • Sharp pins on printed circuit assemblies • Rough - Intel D915GMH | English Manual Product Guide - Page 27
Desktop Board Components BTX Chassis and Component Certifications Ensure that the BTX chassis and certain components; such as the BTX front of this product guide demonstrates compliance with Canadian EMC is insufficient space on this desktop board to provide instructions for replacing and disposing - Intel D915GMH | English Manual Product Guide - Page 28
Intel Desktop Board D915GMH Product Guide Use Only for Intended Applications All Intel desktop boards are evaluated as Information Technology Equipment (I.T.E.) for use in personal computers for installation in homes, offices, schools, computer rooms, and similar locations. The suitability of this - Intel D915GMH | English Manual Product Guide - Page 29
to install the D915GMH desktop board and power supply. Refer to your BTX chassis manual for instructions on installing and removing the desktop board. Figure 4 shows the location of the seven mounting holes for the D915GMH desktop board. OM17179 Figure 4. Desktop Board D915GMH Mounting Screw Hole - Intel D915GMH | English Manual Product Guide - Page 30
Intel Desktop Board D915GMH Product Guide Installing and Removing a Processor Instructions on how to install the processor to the desktop board are given below. Installing a Processor CAUTION Before installing or removing the processor, make sure AC power has been removed by unplugging the power - Intel D915GMH | English Manual Product Guide - Page 31
and Replacing Desktop Board Components 4. Remove the plastic protective socket cover from the load plate. Do not discard the protective socket cover. Always replace the socket cover if the processor is removed from the socket (see Figure 7, E). E OM17228 Figure 7. Remove the Protective Socket Cover - Intel D915GMH | English Manual Product Guide - Page 32
Intel Desktop Board D915GMH Product Guide 6. Hold the processor with your thumb and index fingers oriented as shown in Figure 9. Make sure fingers align to the socket cutouts (see Figure 9, F). Align notches (see Figure 9, G) with the socket (see Figure 9, H). Lower the processor straight down - Intel D915GMH | English Manual Product Guide - Page 33
Heat Sink Cable to the Processor Fan Connector Removing the Processor For instruction on how to remove the processor fan heat sink and processor, refer to the processor installation manual or the Intel World Wide Web site at: http://support.intel.com/support/processors/pentium4/intnotes478.htm 33 - Intel D915GMH | English Manual Product Guide - Page 34
Intel SDRAM memory specifications, the boards require DIMMs that support the Serial Presence Detect (SPD) data structure. You can access the PC Serial Presence Detect Specification at: http://www.intel.com/technology/memory/pcsdram/spec/ Desktop board D915GMH has four 184-pin DDR DIMM sockets - Intel D915GMH | English Manual Product Guide - Page 35
Installing and Replacing Desktop Board Components If additional memory is to be used, install another matched pair of DIMMs in DIMM 1 (black) in both A Channel B Figure 14. Dual Configuration Example 3 DIMM 0 DIMM 1 DIMM 0 DIMM 1 NOTE All other memory configurations will result in single channel - Intel D915GMH | English Manual Product Guide - Page 36
Intel Desktop Board D915GMH Product Guide Installing DIMMs 1. Observe the precautions in "Before You Begin" on page 25. 2. Turn off all peripheral devices connected to the computer. Turn off the computer and disconnect the AC power cord. 3. Remove the computer's cover and locate the DIMM sockets ( - Intel D915GMH | English Manual Product Guide - Page 37
Installing and Replacing Desktop Board Components Removing DIMMs To remove a DIMM, follow these steps: 1. spread the retaining clips at each end of the DIMM socket. The DIMM pops out of the socket. 6. Hold the DIMM by the edges, lift it away from the socket, and store it in an anti-static package. - Intel D915GMH | English Manual Product Guide - Page 38
Intel Desktop Board D915GMH Product Guide Installing and Removing a PCI Express x16 Card CAUTION When installing any PCI Express x16 card on the desktop board the Back Panel VGA Port Removing the PCI Express x16 Card Follow these instructions to remove the PCI Express x16 card from the RM: 1. Observe - Intel D915GMH | English Manual Product Guide - Page 39
IDE cable can connect two drives to the desktop board. The cable supports the ATA-66/100 transfer protocol. Figure 17 Begin" on page 25. • Attach the cable end with the single connector to the Intel desktop board (Figure 17, A). • Attach the cable end with the two closely spaced connectors to the - Intel D915GMH | English Manual Product Guide - Page 40
Intel Desktop Board D915GMH Product Guide Connecting the Serial ATA (SATA) Cable The SATA cable (4-conductor) supports the Serial ATA protocol and connects a single drive to the desktop board. Either end of the cable can be connected to the SATA drive or the connector on the board. For correct cable - Intel D915GMH | English Manual Product Guide - Page 41
), when a second SATA hard drive is added to the system. Follow the steps described in "Configuring the BIOS for Intel Matrix Storage Technology" and "Loading the Intel Application Accelerator Drivers". For more information about RAID, go to http://support.intel.com/support/motherboards/desktop/ 41 - Intel D915GMH | English Manual Product Guide - Page 42
Intel Desktop Board D915GMH Product Guide Connecting Internal Headers Before connecting cables to the internal headers, observe the precautions in "Before You Begin" on page 25. Figure 19 shows the location Item A B C D Description Front panel audio Chassis intrusion Power LED IEEE 1394 (optional) - Intel D915GMH | English Manual Product Guide - Page 43
Installing and Replacing Desktop Board Components Installing a Front Panel Audio Solution Figure 19, E on page 42 shows the location of the yellow front panel audio header. Table 7 shows the pin assignments for the front panel audio header. Table 7. Front Panel Audio Header Signal Names Pin - Intel D915GMH | English Manual Product Guide - Page 44
Intel Desktop Board D915GMH Product Guide IEEE 1394 Headers (Optional) See Figure 19, C on page 42 for the location of the optional V 10 Ground Connecting USB 2.0 Headers See Figure 19, D on page 42 for the location of the black USB 2.0 headers. Table 9 shows the pin assignments for the USB 2.0 - Intel D915GMH | English Manual Product Guide - Page 45
Installing and Replacing Desktop Board Components Connecting to the Flexible Audio System After installing the Realtek audio driver from the Intel Express Installer CD-ROM, the multichannel audio feature can be enabled. Figure 20 shows the two options for back panel audio connectors. The default - Intel D915GMH | English Manual Product Guide - Page 46
Intel Desktop Board D915GMH Product Guide Connecting Fan and Power Cables Connecting Fan Cables Figure 21 shows the location of the fan headers. Connect the processor's fan heat sink cable to the 4-pin processor fan header on the board. Connect chassis fan cables to the 3-pin fan headers. 3 21 A 3 - Intel D915GMH | English Manual Product Guide - Page 47
Components Connecting Power Cables CAUTION Failure to use an BTX power supply, or not connecting the 12 V (2x2) processor core voltage power supply connector to the desktop board may result in damage to the desktop board and/or power supply. Connecting 2x10 Power Supply Cables The 2x12 main power - Intel D915GMH | English Manual Product Guide - Page 48
Intel Desktop Board D915GMH Product Guide Connecting 2x12 Power Supply Cables If you have a 2x12 power supply, follow the instruction below. Figure 23 shows the location of the power connectors. 1 2 2X12 Figure 23. Connecting 2x12 Power Supply Cables OM17189 1. Observe the precautions in " - Intel D915GMH | English Manual Product Guide - Page 49
Installing and Replacing Desktop Board Components Other Connectors Figure 24 shows the location of the PCI bus add-in card connectors, PCI Express x1 add-in card connector, and diskette bus add-in card connector 2 (SMBus routed) Diskette drive connector Figure 24. Location of Other Connectors 49 - Intel D915GMH | English Manual Product Guide - Page 50
Desktop Board D915GMH Product Guide Setting the BIOS Configuration Jumper Block CAUTION Always turn off the power and unplug the power cord from the computer before changing the jumper. Moving the jumper with the power on may result in unreliable computer operation. Figure 25 shows the location - Intel D915GMH | English Manual Product Guide - Page 51
Installing and Replacing Desktop Board Components Clearing Passwords This procedure assumes that the board is installed in the computer and the configuration jumper block is set to normal mode. 1. Observe the precautions in "Before You Begin" on page 25. 2. - Intel D915GMH | English Manual Product Guide - Page 52
Intel Desktop Board D915GMH Product Guide Back Panel Connectors NOTE The line out connector, located on the back panel, is designed to power either headphones or amplified speakers only. Poor audio quality may occur if passive (non-amplified) speakers are connected to this output. Figure 26 shows - Intel D915GMH | English Manual Product Guide - Page 53
Installing and Replacing Desktop Board Components Figure 27 shows the location of the back panel connectors with three audio ports. Line In RJ45 OM17201 Figure 27. Back Panel Connectors (with Three Audio Ports) 53 - Intel D915GMH | English Manual Product Guide - Page 54
Intel Desktop Board D915GMH Product Guide Replacing the Battery A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer is not plugged into a wall socket, the battery has an estimated life of three years. When the computer is plugged in, the standby current from - Intel D915GMH | English Manual Product Guide - Page 55
Installing and Replacing Desktop Board Components PRECAUCIÓN Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del mismo tipo que las recomendadas - Intel D915GMH | English Manual Product Guide - Page 56
Intel Desktop Board D915GMH Product Guide AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam - Intel D915GMH | English Manual Product Guide - Page 57
Installing and Replacing Desktop Board Components O To replace the battery, follow these steps: 1. Observe power source (wall outlet or power adapter). 3. Remove the computer cover. 4. Locate the battery on the board (see Figure 28). 5. With a medium flat-bladed screwdriver, gently pry the - Intel D915GMH | English Manual Product Guide - Page 58
Intel Desktop Board D915GMH Product Guide 58 - Intel D915GMH | English Manual Product Guide - Page 59
. To update the BIOS with the Intel Express BIOS Update utility: 1. Go to the Intel World Wide Web site: http://support.intel.com/support/motherboards/desktop/ 2. Navigate to the D915GMH page, click "[view] Latest BIOS updates," and select the Express BIOS Update utility file. 3. Download the file - Intel D915GMH | English Manual Product Guide - Page 60
navigating to the Desktop Board D915GMH page on the Intel World Wide Web site at: http://support.intel.com/support/motherboards/desktop Navigate to the D915GMH page, click "[view] Latest BIOS updates," and select the Iflash BIOS Update utility file. NOTE Review the instructions distributed with the - Intel D915GMH | English Manual Product Guide - Page 61
all external peripherals. 2. Remove the computer cover and locate the configuration jumper block (see Figure 25). 3. Remove the jumper from all pins as shown below to set recovery mode for setup. 3 1 4. Insert the bootable BIOS update diskette into diskette drive A. 5. Replace the computer cover - Intel D915GMH | English Manual Product Guide - Page 62
Intel Desktop Board D915GMH Product Guide 62 - Intel D915GMH | English Manual Product Guide - Page 63
Intel Desktop Board D915GMH with a Gigabit LAN solution • Microsoft Windows 2000 Professional (SP4) or Microsoft Windows failure and/or replacement of the motherboard, recovery procedures may allow migratable keys Ownership/contents may be cleared (via a BIOS switch) to allow for the transfer of - Intel D915GMH | English Manual Product Guide - Page 64
Intel Desktop Board D915GMH Product Guide should consist of: • At least one upper case letter (A to Z) • At least one numerical etc.) Example Passwords: "I wear a Brown hat 2 worK @ least once-a-month" or "uJGFak&%)adf35a9m" NOTE store them in a secured location (vault, safe deposit box, off- - Intel D915GMH | English Manual Product Guide - Page 65
text) files may then be backed up to a removable media and stored in a secure location. The advantage of the clear text backup is that no TPM key is required to restore the Quick Reference (included with the desktop board) to the system owner to assist them in enabling and initializing the TPM. 65 - Intel D915GMH | English Manual Product Guide - Page 66
Intel Desktop Board D915GMH Product Guide screen), press the key to enter BIOS setup. 2. Use the arrow keys to go to should reboot and start Microsoft Windows. Assuming Trusted Platform Module removable media should be stored in a secure location. No copies of this Emergency Recovery Token file - Intel D915GMH | English Manual Product Guide - Page 67
documents and files should be updated after any password changes. Recovery Procedures How to Recover from Hard Disk Failure Restore the latest hard drive image from backup to the new hard drive - no TPM specific recovery is necessary. How to Recover from Desktop Board or TPM Failure This procedure - Intel D915GMH | English Manual Product Guide - Page 68
Intel Desktop Board D915GMH Product Guide Platform Initiation Wizard) • Working original operating system (OS) instructions during the Security Platform Initialization, and append the Emergency Recovery Archive to the existing archive. 5. Provide all the necessary passwords, files, and file locations - Intel D915GMH | English Manual Product Guide - Page 69
board components. Failure to do this can result in personal injury or equipment damage. Some circuitry on the desktop board instructions). case. 2. Move the configuration jumper on the board to pins 2-3. 3. Restore power to the PC and power on. 4. System should automatically enter BIOS support/ets.html - Intel D915GMH | English Manual Product Guide - Page 70
Intel Desktop Board D915GMH Product Guide 70 - Intel D915GMH | English Manual Product Guide - Page 71
5 Desktop Board Resources Memory Map Table 12. System Memory Map Address Range (decimal) Memory Runtime BIOS Reserved Available high DOS memory (open to the PCI bus) Video memory and BIOS Extended BIOS data (movable by memory manager software) Extended conventional memory Conventional memory - Intel D915GMH | English Manual Product Guide - Page 72
Intel Desktop Board D915GMH Product Guide Interrupts Table 14. Interrupts IRQ System Resource NMI I/O channel check 0 Reserved, interval timer 1 Reserved, keyboard buffer full 2 Reserved, cascade interrupt from slave PIC 3 COM2* (Plug - Intel D915GMH | English Manual Product Guide - Page 73
A Error Messages and Indicators Desktop board D915GMH reports POST errors in two ways: • By sounding a beep code • By displaying an error message on the monitor BIOS Beep Codes The BIOS also issues a beep code (one long tone followed by two short tones) during POST if the video configuration - Intel D915GMH | English Manual Product Guide - Page 74
Intel Desktop Board D915GMH Product Guide BIOS Error Messages When a recoverable error occurs during the POST, the BIOS displays an error message describing the problem. Table 16 gives an explanation of the BIOS error messages. Table 16. BIOS is incorrect. CMOS memory may have been corrupted - Intel D915GMH | English Manual Product Guide - Page 75
Error Messages and Indicators Table 43. BIOS Error Messages (continued) Error Message Memory Size Decreased Memory Size Increased Memory Size Changed No Boot Device Available Off Board Parity Error On Board Parity Error Parity Error NVRAM / CMOS / PASSWORD cleared by Jumper Pressed - Intel D915GMH | English Manual Product Guide - Page 76
Intel Desktop Board D915GMH Product Guide 76 - Intel D915GMH | English Manual Product Guide - Page 77
- Safety - Part 1: General Requirements (International) European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the product Intel® Desktop Board D915GMH is in conformity with all applicable essential requirements necessary for CE marking - Intel D915GMH | English Manual Product Guide - Page 78
Intel Desktop Board D915GMH Product Guide Dansk Dette produkt er i overensstemmelse med det europæiske direktiv 89/336/EEC & 73/23/EEC. Dutch Dit product is in navolging van de bepalingen - Intel D915GMH | English Manual Product Guide - Page 79
Regulatory Compliance EMC Regulations Desktop Board D915GMH complies with the EMC regulations stated in Table 18 it may cause radio interference. Install and use the equipment according to the instruction manual. Korean Class B statement translation: this is household equipment that is certified - Intel D915GMH | English Manual Product Guide - Page 80
Intel Desktop Board D915GMH Product Guide Product Certification Markings (Board Level) Desktop Board D915GMH has the product certification markings shown in Table 19: Table 19. Product Certification Markings Description UL joint US/Canada Recognized Component mark. Includes adjacent UL
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
 |
 |
Intel
®
Desktop Board
D915GMH Product Guide
Balanced Technology Extended (BTX)
Form Factor Board
Order Number:
C6842
7
-001