Intel DCCP847DYE Technical Product Specification

Intel DCCP847DYE Manual

Get Intel DCCP847DYE PDF manuals and user guides View all Intel DCCP847DYE manuals
Add to My Manuals
Save this manual to your list of manuals

Intel DCCP847DYE manual content summary:

  • Intel DCCP847DYE | Technical Product Specification - Page 1
    G81548-002 The Intel Next Unit of Computing Board DCP847SKE may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata are documented in the Intel Next Unit of Computing Board DCP847SKE Specification Update.
  • Intel DCCP847DYE | Technical Product Specification - Page 2
    , schools, computer rooms, and similar locations. The suitability of this product for other PC or embedded non-PC applications or other environments, such as medical, industrial, alarm systems, test equipment, etc. may not be supported without further evaluation by Intel. Intel Corporation may have
  • Intel DCCP847DYE | Technical Product Specification - Page 3
    the note in Section 3.8 on page 60 regarding removing power before setting or clearing the hard disk drive password. Errata Current characterized errata, if any, are documented in a separate Specification Update. See http://developer.intel.com/products/desktop/motherboard/index.htm for the latest
  • Intel DCCP847DYE | Technical Product Specification - Page 4
    Intel Desktop Board DCP847SKE Technical Product Specification iv
  • Intel DCCP847DYE | Technical Product Specification - Page 5
    for general audiences. What This Document Contains Chapter 1 2 3 4 5 Description A description of the hardware used on Intel Next Unit of Computing Board DCP847SKE A map of the resources of the Intel Next Unit of Computing Board The features supported by the BIOS Setup program A description of
  • Intel DCCP847DYE | Technical Product Specification - Page 6
    Intel Desktop Board DCP847SKE Technical Product Specification Other Common Notation # GB GB/s Gb/s KB 048,576 bytes) Megabytes per second Megabit (1,048,576 bits) Megabits per second Thermal Design Power An address or data value ending with a lowercase h indicates a hexadecimal value. Volts.
  • Intel DCCP847DYE | Technical Product Specification - Page 7
    Block Diagram 17 1.2 Online Support 18 1.3 Processor 18 1.4 System Memory 19 1.4.1 Memory Configurations 20 1.5 Intel® QS77 Express Chipset 22 1.5.1 Direct Media Interface (DMI 22 1.5.2 Display Interfaces 22 1.6 Graphics Subsystem 22 1.6.1 Integrated Graphics 22 1.6.2 USB 24 1.7 SATA
  • Intel DCCP847DYE | Technical Product Specification - Page 8
    2.5.1 Power Supply Considerations 49 2.5.2 Fan Header Current Capability 50 2.6 Thermal Considerations 50 2.7 Reliability 53 2.8 Environmental 53 3 Overview of BIOS Features 3.1 Introduction 55 3.2 BIOS Flash Memory Organization 56 3.3 System Management BIOS (SMBIOS 56 3.4 Legacy USB Support
  • Intel DCCP847DYE | Technical Product Specification - Page 9
    32 9. System Memory Map 37 10. Connectors and Headers Shown in Figure 10 40 11. PCI Express Full-Mini Card Connector 41 12. Dual-Port Front Panel USB 2.0 Header 42 13. 19 V Internal Power Supply Connector 43 14. Front Panel Header 43 15. States for a One-Color Power LED 44 16. BIOS Setup
  • Intel DCCP847DYE | Technical Product Specification - Page 10
    Intel Desktop Board DCP847SKE Technical Product Specification 23. Master Key and User Hard Drive Password Functions 60 24. Supervisor and User Password Functions 61 25. Front-panel Power LED Blink Codes 63 26. BIOS Error Messages 63 27. Port 80h POST Code Ranges 64 28. Port 80h POST Codes 65
  • Intel DCCP847DYE | Technical Product Specification - Page 11
    Capabilities BIOS 4.0 inches by 4.0 inches (101.60 millimeters by 101.60 millimeters) • Soldered-down Intel® Celeron® processor 847 with up to 17 W TDP ― Integrated graphics ― Integrated memory controller • Two 204-pin DDR3 SDRAM Small Outline Dual Inline Memory Module (SO-DIMM) sockets • Support
  • Intel DCCP847DYE | Technical Product Specification - Page 12
    ) LAN Support Gigabit (10/100/1000 Mb/s) LAN subsystem using the Intel® 82579V Gigabit Ethernet Controller Hardware Monitor Subsystem Hardware monitoring subsystem, based on a Nuvoton NPCE791C embedded controller, including: • Voltage sense to detect out of range power supply voltages • Thermal
  • Intel DCCP847DYE | Technical Product Specification - Page 13
    Product Description 1.1.2 Board Layout (Top) Figure 1 shows the location of the major components on the top-side of Intel Next Unit of Computing Board DCP847SKE. Figure 1. Major Board Components (Top) 13
  • Intel DCCP847DYE | Technical Product Specification - Page 14
    Desktop Board DCP847SKE Technical Product Specification Table 3 lists the components identified in Figure 1. Table 3. Components Shown in Figure 1 Item from Figure 1 A B Description Battery Standby power LED C Processor fan header D Onboard power button E Power LED F Hard Disk Drive
  • Intel DCCP847DYE | Technical Product Specification - Page 15
    Product Description 1.1.3 Board Layout (Bottom) Figure 2 shows the location of the major components on the bottom-side of Intel Next Unit of Computing Board DCP847SKE. Figure 2. Major Board Components (Bottom) 15
  • Intel DCCP847DYE | Technical Product Specification - Page 16
    Intel Desktop Board DCP847SKE Technical Product Specification Table 4. Components Shown in Figure 2 Item from Figure 2 Description A Back panel connectors B PCI Express Full-Mini Card connector C PCI Express Half-Mini Card connector D Front panel dual-port USB 2.0 header E BIOS setup
  • Intel DCCP847DYE | Technical Product Specification - Page 17
    Product Description 1.1.4 Block Diagram Figure 3 is a block diagram of the major functional areas of the board. Figure 3. Block Diagram 17
  • Intel DCCP847DYE | Technical Product Specification - Page 18
    Chipset information BIOS and driver updates Tested memory Integration information http://www.intel.com/products/desktop/chipsets/index.htm http://downloadcenter.intel.com http://www.intel.com/support/motherboards/desktop/sb/CS025414.htm http://www.intel.com/support/go/buildit 1.3 Processor The
  • Intel DCCP847DYE | Technical Product Specification - Page 19
    of addressable memory. • Minimum recommended total system memory: 1024 MB • Non-ECC SO-DIMMs • Serial Presence Detect • XMP profile support for voltage configure memory settings for optimum performance. If non-SPD memory is installed, the BIOS will attempt to correctly configure the memory settings,
  • Intel DCCP847DYE | Technical Product Specification - Page 20
    DCP847SKE Technical Product Specification For information about... Tested Memory Refer to: http://support.intel.com/support/motherboards/desktop/sb /CS-025414.htm 1.4.1 Memory Configurations The processor supports the following types of memory organization: • Dual channel (Interleaved) mode. This
  • Intel DCCP847DYE | Technical Product Specification - Page 21
    Product Description Figure 4 illustrates the memory channel and SO-DIMM configuration. Figure 4. Memory Channel and SO-DIMM Configuration 21
  • Intel DCCP847DYE | Technical Product Specification - Page 22
    between a source (computer, digital set top boxes, etc.) and the sink (panels, monitor, and TVs). The PCH supports HDCP 1.4 for content protection over wired displays (HDMI). 1.6 Graphics Subsystem The board supports graphics through Intel Graphics Technology. 1.6.1 Integrated Graphics The board
  • Intel DCCP847DYE | Technical Product Specification - Page 23
    with 4 GB and above system memory configuration 1.6.1.2 Video Memory Allocation Intel® Dynamic Video Memory Technology (DVMT) is a method for dynamically allocating system memory for use as graphics memory to balance 2D/3D graphics and system performance. If your computer is configured to use DVMT
  • Intel DCCP847DYE | Technical Product Specification - Page 24
    Computer systems SSD support supports AHCI storage mode via the Intel QS77 Express Chipset. NOTE In order to use AHCI mode, AHCI must be enabled in the BIOS. Also, during Microsoft Windows XP installation, F6 must be pressed to install the AHCI drivers. See your Microsoft Windows XP documentation
  • Intel DCCP847DYE | Technical Product Specification - Page 25
    3.3 VSB applied via the power supply 5 V STBY rail. NOTE If the battery and AC power fail, date and time values will be reset and the user will be notified during the POST. When the voltage drops below a certain level, the BIOS Setup program settings stored in CMOS RAM (for example, the date and
  • Intel DCCP847DYE | Technical Product Specification - Page 26
    Intel Desktop Board DCP847SKE Technical Product Specification 1.9.1 Intel® 82579V Gigabit Ethernet Controller The Intel 82579V Gigabit Ethernet Controller supports the following features: • 10/100/1000 BASE-T IEEE 802.3 compliant • Energy Efficient Ethernet (EEE) IEEE802.3az support (Low Power Idle
  • Intel DCCP847DYE | Technical Product Specification - Page 27
    5. LAN Connector LED Locations Table 6 describes the LED states when the board is powered up and the LAN subsystem is operating. Table 6. LAN Connector LED States LED LAN link is established. LAN activity is occurring. 10 Mb/s data rate is selected. 100 Mb/s data rate is selected. 1000 Mb/s
  • Intel DCCP847DYE | Technical Product Specification - Page 28
    Intel Desktop Board DCP847SKE Technical Product Specification 1.10 supports the following: • Processor and system ambient temperature monitoring • Chassis fan speed monitoring • Voltage monitoring of +12 V, +5 V, +3.3 V, Memory Vcc (V_SM), +Vccp, PCH Vcc • SMBus interface 1.10.2 Fan Monitoring Fan
  • Intel DCCP847DYE | Technical Product Specification - Page 29
    Product Description 1.10.3 Thermal Solution Figure 6 shows the location of the thermal solution and processor fan header. Item A B Description Processor fan header Thermal solution Figure 6. Thermal Solution and Fan Header 29
  • Intel DCCP847DYE | Technical Product Specification - Page 30
    boards may require an ACPI-aware driver), video displays, and hard disk drives • Methods for achieving less than 15-watt system operation in the power-on/standby sleeping state • A Soft-off feature that enables the operating system to power-off the computer • Support for multiple wake-up events (see
  • Intel DCCP847DYE | Technical Product Specification - Page 31
    or external source. No power to the system. Service can be performed safely. Notes: 1. Total system power is dependent on the system configuration, including add-in boards and peripherals powered by the system chassis' power supply. 2. Dependent on the standby power consumption of wake-up devices
  • Intel DCCP847DYE | Technical Product Specification - Page 32
    Intel Desktop Board DCP847SKE Technical Product Specification 1.11.1.2 Wake-up Devices and Events Table 9 lists the devices or specific events that can wake the computer from specific states. Table 9. Wake-up Devices and Events Devices/events that wake up the system... Power switch RTC alarm LAN
  • Intel DCCP847DYE | Technical Product Specification - Page 33
    known wake state. Table 9 on page 32 lists the devices and events that can wake the computer from the S3 state. The use of Instantly Available PC technology requires operating system support and drivers for any installed PCI Express add-in card. 1.11.2.3 LAN Wake Capabilities LAN wake capabilities
  • Intel DCCP847DYE | Technical Product Specification - Page 34
    Intel Desktop Board DCP847SKE Technical Product Specification 1.11.2.7 +5 V Standby Power Indicator LED The standby power indicator LED shows that power is still present even when the computer appears to be off. Figure 7 shows the location of the standby power LED. CAUTION If AC power has been
  • Intel DCCP847DYE | Technical Product Specification - Page 35
    the top of DRAM (total system memory). On a system that has 16 GB of system memory installed, it is not possible to use all of the installed memory due to system address space being allocated for other system critical functions. These functions include the following: • BIOS/SPI Flash device (16 Mbit
  • Intel DCCP847DYE | Technical Product Specification - Page 36
    Intel Desktop Board DCP847SKE Technical Product Specification Figure 8. Detailed System Memory Address Map 36
  • Intel DCCP847DYE | Technical Product Specification - Page 37
    Technical Reference 2.1.2 Memory Map Table 10 lists the system memory map. Table 10. System Memory Map Address Range (decimal) Address Range (hex) 1024 K - computer's chassis, such as fans and internal peripherals. Do not use these connectors or headers to power devices external to the computer
  • Intel DCCP847DYE | Technical Product Specification - Page 38
    Intel Desktop Board DCP847SKE Technical Product Specification 2.2.1 Back Panel Connectors Figure 9 shows the location of the back panel connectors for the board. Item A B C D E F Description LAN HDMI connector 2
  • Intel DCCP847DYE | Technical Product Specification - Page 39
    Technical Reference 2.2.2 Connectors and Headers (Bottom) Figure 10 shows the locations of the connectors and headers on the bottom-side of the board. Figure 10. Connectors and Headers (Bottom) 39
  • Intel DCCP847DYE | Technical Product Specification - Page 40
    Intel Desktop Board DCP847SKE Technical Product Specification Table 11 lists the connectors and headers identified in Figure 10. Table 11. Connectors and Headers Shown in Figure 10 Item from Figure 10 Description A PCI Express Full-Mini Card connector B PCI Express Half-Mini Card connector
  • Intel DCCP847DYE | Technical Product Specification - Page 41
    Signal Name Additional Signal Name 1 WAKE# 2 3.3 V 3 Reserved (Extra USB) +5 V_MINI 4 GND 5 Reserved (Extra USB) CARDIN 6 1.5 V 7 CLKREQ# 8 Reserved 9 GND 10 Reserved 11 REFCLK- 12 Reserved 13 REFCLK+ 14 Reserved 15 GND 16 Reserved 17 Reserved (Extra USB) LP5
  • Intel DCCP847DYE | Technical Product Specification - Page 42
    Intel Desktop Board DCP847SKE Technical Product Specification Table 12. PCI Express Full- DC 2 +5 V DC 3 D− 4 D− 5 D+ 6 D+ 7 Ground 8 Ground 9 KEY (no pin) 10 No Connect 2.2.2.2 Add-in Card Connectors The board has the following add-in card connectors: • One PCI Express Half-Mini
  • Intel DCCP847DYE | Technical Product Specification - Page 43
    the shell is GND. The maximum current rating is 10 A. • Internal Power Supply - the board can alternatively be powered via the internal 19 V DC 1 x 2 power connector, where pin 1 is GND and pin 2 is +19 (±10%) VDC. Table 14. 19 V Internal Power Supply Connector Pin Signal Name 1 Ground 2 +19
  • Intel DCCP847DYE | Technical Product Specification - Page 44
    Intel Desktop Board DCP847SKE Technical Product Specification Figure 11. Connection Diagram for Front Panel Header 2.2.2.4.1 Hard Drive Activity LED Header Pins 1 and 3 can be connected to an LED to provide a visual indicator that data is being read from or written to a hard drive. Proper LED
  • Intel DCCP847DYE | Technical Product Specification - Page 45
    on or off. (The time requirement is due to internal debounce circuitry on the board.) At least two seconds must pass before the power supply will recognize another on/off signal. 2.2.2.5 Front Panel USB 2.0 Header Figure 12 is a connection diagram for the front panel USB 2.0 header. NOTE • The
  • Intel DCCP847DYE | Technical Product Specification - Page 46
    Intel Desktop Board DCP847SKE Technical Product Specification 2.3 BIOS Setup Configuration Jumper CAUTION Do not move a jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 13
  • Intel DCCP847DYE | Technical Product Specification - Page 47
    that this Configure mode is the only way to clear the BIOS/CMOS settings. Press F9 (restore defaults) while in Configure mode to restore the BIOS/CMOS settings to their default values. Recovery None The BIOS attempts to recover the BIOS configuration. A recovery CD or flash drive is required. 47
  • Intel DCCP847DYE | Technical Product Specification - Page 48
    Intel Desktop Board DCP847SKE Technical Product Specification 2.4 Mechanical Considerations 2.4.1 Form Factor The board is designed to fit into a custom chassis. Figure 14 illustrates the mechanical form factor
  • Intel DCCP847DYE | Technical Product Specification - Page 49
    is provided in the accessories box shall it be useful to the system integrator for this purpose. Simultaneous connection of both external and internal power supply units could result in potential damage to the board, power supplies, or other hardware. System power requirements will depend on actual
  • Intel DCCP847DYE | Technical Product Specification - Page 50
    for determining the adequacy of any thermal or system design remains solely with the system integrator. Intel makes no warranties or representations that merely following the instructions presented in this document will result in a system with adequate thermal performance. CAUTION Ensure that the
  • Intel DCCP847DYE | Technical Product Specification - Page 51
    Technical Reference Figure 15 shows the locations of the localized high temperature zones. Item A B Description Processor voltage regulator area Thermal solution Figure 15. Localized High Temperature Zones 51
  • Intel DCCP847DYE | Technical Product Specification - Page 52
    system BIOS processor specification updates Intel QS77 Express Chipset 104 oC For information about Processor datasheets and specification updates Intel® 7 Series Chipset Thermal Mechanical Specifications and Design Guidelines Refer to Section 1.2, page 18 http://www.intel.com/Products/Desktop
  • Intel DCCP847DYE | Technical Product Specification - Page 53
    Technical Reference 2.7 Reliability The Mean Time Between Failures (MTBF) prediction is calculated using component and subassembly random failure rates. The calculation is based on the Telcordia SR-332 Issue 2, Method I, Case 3, 55 ºC ambient. The MTBF prediction is used to estimate repair rates
  • Intel DCCP847DYE | Technical Product Specification - Page 54
    Intel Desktop Board DCP847SKE Technical Product Specification 54
  • Intel DCCP847DYE | Technical Product Specification - Page 55
    Setup program can be used to view and change the BIOS settings for the computer. The BIOS Setup program is accessed by pressing the key after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins. NOTE The maintenance menu is displayed only when the board
  • Intel DCCP847DYE | Technical Product Specification - Page 56
    USB drivers are not yet available. Legacy USB support is used to access the BIOS Setup program, and to install an operating system that supports USB. By default, Legacy USB support is set to Enabled. Legacy USB support operates as follows: 1. When you apply power to the computer, legacy support is
  • Intel DCCP847DYE | Technical Product Specification - Page 57
    BIOS matches the target system to prevent accidentally installing an incompatible BIOS. NOTE Review the instructions distributed with the upgrade utility before attempting a BIOS update. For information about BIOS update utilities Refer to http://support.intel.com/support/motherboards/desktop
  • Intel DCCP847DYE | Technical Product Specification - Page 58
    No (BIOS update file is bigger than 1.4 MB size limit) NOTE Supported file systems for BIOS recovery: • NTFS (sparse, compressed, or encrypted files are not supported) • FAT32 • FAT16 • FAT12 • ISO 9660 For information about BIOS recovery Refer to http://www.intel.com/support/motherboards/desktop
  • Intel DCCP847DYE | Technical Product Specification - Page 59
    and Beep Codes 3.7 Boot Options In the BIOS Setup program, the user can choose to boot from a hard drive, optical drive, removable drive, or the network. The default setting is for the optical drive to be the first boot device, the hard drive second, removable drive third, and the network fourth
  • Intel DCCP847DYE | Technical Product Specification - Page 60
    A manual power cycle will be required to resume system operation. NOTE As implemented on DCP847SKE, Hard Disk Drive Password Security is only supported on SATA port 0. The passwords are stored on the hard disk drive so if the drive is relocated to another computer that does not support Hard Disk
  • Intel DCCP847DYE | Technical Product Specification - Page 61
    includes security features that restrict access to the BIOS Setup program and who can boot the computer. A supervisor password and a user password can be set for the BIOS Setup program and for booting the computer, with the following restrictions: • The supervisor password gives unrestricted access
  • Intel DCCP847DYE | Technical Product Specification - Page 62
    Intel Desktop Board DCP847SKE Technical Product Specification 62
  • Intel DCCP847DYE | Technical Product Specification - Page 63
    seconds, then off for 0.5 seconds. The pattern repeats until the BIOS update is complete. On-off (1.0 second each) two times, then 2.5-second pause (off), entire pattern repeats (blink and pause) until the system is powered off. Memory error On-off (1.0 second each) three times, then 2.5-second
  • Intel DCCP847DYE | Technical Product Specification - Page 64
    Intel Desktop Board DCP847SKE Technical Product Specification 4.3 Port 80h POST Codes During the POST, the BIOS execution 0x21 - 0x29 MRC memory detection 0x2A - 0x2F PEI phase post MRC execution 0x31 - 0x35 Recovery 0x36 - 0x3F Platform DXE driver 0x41 - 0x4F CPU Initialization
  • Intel DCCP847DYE | Technical Product Specification - Page 65
    to SMBUS execute read/write 0x18 Exit SMBUS execute read/write Memory 0x21 MRC entry point 0x22 Reading SPD from memory DIMMs 0x23 0x25 0x28 Detecting presence of memory DIMMs Configuring memory Testing memory 0x29 Exit MRC driver PEI after MRC 0x2A Start to Program MTRR Settings 0x2B
  • Intel DCCP847DYE | Technical Product Specification - Page 66
    Intel Desktop CPU PEI Phase 0x41 Begin CPU PEI Init 0x42 XMM instruction enabling 0x43 End CPU PEI Init 0x44 0x45 0x46 CPU memory space attributes according to MTRRs 0x49 Load the microcode if needed 0x4A Initialize strings to HII database 0x4B 0x4C Initialize MP support
  • Intel DCCP847DYE | Technical Product Specification - Page 67
    input buffer Instructing keyboard controller to run Self Test (PS/2 only) Mouse (PS/2 or USB) Resetting mouse Detecting mouse Detecting presence of mouse Enabling mouse Fixed Media Resetting fixed media Disabling fixed media 0xB2 0xB3 Detecting presence of a fixed media (IDE hard drive detection
  • Intel DCCP847DYE | Technical Product Specification - Page 68
    Intel Desktop Board DCP847SKE Technical Product Specification Table 29. Port 80h POST Codes ( DXE Core 0xE4 0xE7 Entered DXE phase Waiting for user input BDS 0xE8 Checking password 0xE9 Entering BIOS setup 0xEB Calling Legacy Option ROMs Runtime Phase/EFI OS Boot 0xF8 EFI boot service
  • Intel DCCP847DYE | Technical Product Specification - Page 69
    memory DIMMs 23 Detecting presence of memory DIMMs 25 Configuring memory 28 Testing memory 34 Loading recovery capsule E4 Entered DXE phase 12 Starting application processor 28 Testing memory 90 Resetting keyboard 94 Clearing keyboard input buffer E7 Waiting for user input
  • Intel DCCP847DYE | Technical Product Specification - Page 70
    Intel Desktop Board DCP847SKE Technical Product Specification 70
  • Intel DCCP847DYE | Technical Product Specification - Page 71
    Compatibility (EMC) standards • Product certification markings 5.1.1 Safety Standards Intel Next Unit of Computing Board DCP847SKE complies with the safety standards stated in Table 31 when correctly installed in a compatible host system. Table 31. Safety Standards Standard Title CSA/UL 60950
  • Intel DCCP847DYE | Technical Product Specification - Page 72
    Intel Desktop Board DCP847SKE Technical Product Specification 5.1.2 European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the products Intel® Next Unit of Computing Board DCP847SKE is in conformity with all applicable essential
  • Intel DCCP847DYE | Technical Product Specification - Page 73
    of this program, including the scope of covered products, available locations, shipping instructions, terms and conditions, etc Intel Product Recycling Program http://www.intel.com/intel/other/ehs/product_ecology Deutsch Als Teil von Intels Engagement für den Umweltschutz hat das Unternehmen das
  • Intel DCCP847DYE | Technical Product Specification - Page 74
    en savoir plus sur ce programme, à savoir les produits concernés, les adresses disponibles, les instructions d'expédition, les conditions générales, etc. 日本語 http://www.intel.com/in tel/other/ehs/product_ecology Malay Sebagai sebahagian daripada komitmennya terhadap tanggungjawab persekitaran
  • Intel DCCP847DYE | Technical Product Specification - Page 75
    /other/ehs/product_ecology Web sayfasına gidin. 5.1.4 EMC Regulations Intel Next Unit of Computing Board DCP847SKE complies with the EMC regulations stated in Table 32 when correctly installed in a compatible host system. Table 32. EMC Regulations Regulation Title FCC 47 CFR Part 15, Subpart
  • Intel DCCP847DYE | Technical Product Specification - Page 76
    Intel Desktop Board and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there equipment not expressly approved by Intel Corporation could void the user's authority to operate the equipment. Tested to comply with FCC
  • Intel DCCP847DYE | Technical Product Specification - Page 77
    or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual. Korea Class B Statement Korea Class B Statement translation: This equipment is for home use, and has acquired electromagnetic conformity registration
  • Intel DCCP847DYE | Technical Product Specification - Page 78
    agencies in the definition of new requirements. Intel Next Unit of Computing Board DCP847SKE meets the following program requirements in an adequate system configuration, including appropriate selection of an efficient power supply: • Energy Star v5.2, category B • EPEAT* • Korea e-Standby
  • Intel DCCP847DYE | Technical Product Specification - Page 79
    ) Intel Next Unit of Computing Board UL file number for Intel Next Unit of Computing Boards: E210882. tick mark. Includes adjacent Intel supplier code number, N-232 mark. Includes adjacent Intel company number, D33025. the symbol used on Intel Next Unit of Computing Boards and associated collateral
  • Intel DCCP847DYE | Technical Product Specification - Page 80
    Intel Desktop Board DCP847SKE Technical Product Specification 5.2 Battery Disposal Information CAUTION Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled
  • Intel DCCP847DYE | Technical Product Specification - Page 81
    Regulatory Compliance and Battery Disposal Information PRECAUCIÓN Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del mismo tipo que las recomendadas por el fabricante del equipo. Para deshacerse de las pilas usadas, siga igualmente las
  • Intel DCCP847DYE | Technical Product Specification - Page 82
    Intel Desktop Board DCP847SKE Technical Product Specification AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri
  • Intel DCCP847DYE | Technical Product Specification - Page 83
    Regulatory Compliance and Battery Disposal Information 83
  • Intel DCCP847DYE | Technical Product Specification - Page 84
    Intel Desktop Board DCP847SKE Technical Product Specification 84
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Intel® Next Unit of Computing
Board DCP847SKE
Technical Product Specification
January 2013
Order Number:
G81548-002
The Intel Next Unit of Computing Board DCP847SKE may contain design defects or errors known as errata that may cause the product to deviate from
published specifications.
Current characterized errata are documented in the Intel Next Unit of Computing Board DCP847SKE Specification Update.