Intel DG33TL Product Specification - Page 15
Legacy Considerations, Online Support, Processor - drivers
View all Intel DG33TL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Product Description 1.2 Legacy Considerations This board differs from other Intel Desktop Board products, with specific changes including (but not limited to) the following: • No parallel port • No floppy drive connector • No serial port on the back panel • The serial port header is located near the memory sockets and may require a specialized chassis or cabling solution to use 1.3 Online Support To find information about... Intel® Desktop Board DG33TL Desktop Board Support Available configurations for the Desktop Board DG33TL Supported processors Chipset information BIOS and driver updates Visit this World Wide Web site: http://www.intel.com/products/motherboard/DG33TL/index.htm http://support.intel.com/support/motherboards/desktop http://www.intel.com/products/motherboard/DG33TL/index.htm http://www.intel.com/go/findcpu http://www.intel.com/products/desktop/chipsets/index.htm http://downloadcenter.intel.com 1.4 Processor The board is designed to support the following processors: • Intel Core 2 Quad processor in an LGA775 socket with a 1066 MHz system bus • Intel Core 2 Duo processor in an LGA775 socket with a 1333 or 1066 or 800 MHz system bus • Intel Pentium Dual-Core processor in an LGA775 socket with an 800 MHz system bus • Intel Celeron processor in an LGA775 socket with an 800 MHz system bus Other processors may be supported in the future. This board is designed to support processors with a maximum wattage of 105 W. The processors listed above are only supported when falling within the wattage requirements of the DG33TL board. See the Intel web site listed below for the most up-to-date list of supported processors. For information about... Supported processors Refer to: http://www.intel.com/go/findcpu CAUTION Use only the processors listed on the web site above. Use of unsupported processors can damage the board, the processor, and the power supply. # INTEGRATOR'S NOTE Use only ATX12V-compliant power supplies. For information about Power supply connectors Refer to Section 2.2.2.4, page 49 15