Intel DG43RK English Product Guide
Intel DG43RK Manual
 |
View all Intel DG43RK manuals
Add to My Manuals
Save this manual to your list of manuals |
Intel DG43RK manual content summary:
- Intel DG43RK | English Product Guide - Page 1
Intel® Desktop Board DG43RK Product Guide Order Number: E88305-001 - Intel DG43RK | English Product Guide - Page 2
at any time, without notice. Intel Desktop Board DG43RK may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request. Contact your local Intel sales office or your distributor to - Intel DG43RK | English Product Guide - Page 3
of product features 2 Installing and Replacing Desktop Board Components: instructions on how to install the Desktop Board and other hardware components 3 Updating the BIOS: instructions on how to update the BIOS A Error Messages and Indicators: information about BIOS error messages and beep codes - Intel DG43RK | English Product Guide - Page 4
Intel Desktop Board DG43RK Product Guide Terminology The table below gives descriptions of some common terms used in the product guide. Term Description GB Gigabyte (1,073,741,824 bytes) GHz Gigahertz (one billion hertz) KB Kilobyte (1024 bytes) kHz Kilohertz (one thousand hertz) MB - Intel DG43RK | English Product Guide - Page 5
11 Desktop Board Components 12 Online Support 14 Processor ...14 Main Memory...15 Intel® G43 Express Chipset 16 Intel G43 Graphics Subsystem 16 Intel GMA X4500 Graphics Controller 16 External PCI Express x16 Graphics 17 Audio Subsystem 18 Legacy Input/Output (I/O) Controller 19 LAN Subsystem - Intel DG43RK | English Product Guide - Page 6
Intel Desktop Board DG43RK Product Guide Installing the I/O Shield 31 Installing and Removing the Desktop Board 32 Installing and Removing a Processor 33 Installing a Processor 33 Installing a Processor Fan Heat Sink 36 Connecting the Processor Fan Heat Sink Cable 37 Removing the Processor 37 - Intel DG43RK | English Product Guide - Page 7
77 Ensure Electromagnetic Compatibility (EMC) Compliance 77 Product Certifications 78 Board-Level Certification Markings 78 Chassis and Component Certifications 79 ENERGY STAR*, e-Standby, and ErP Compliance 79 Figures 1. Intel Desktop Board DG43RK Components 12 2. LAN Status LEDs 19 - Intel DG43RK | English Product Guide - Page 8
Intel Desktop Board DG43RK Product Guide Tables 1. Feature Summary 9 2. Intel Desktop Board DG43RK Components 13 3. Back Panel and Front Panel Audio Jack Retasking Support 18 4. LAN Connector LEDs 20 5. S/PDIF Connector Signal Names 48 6. Front Panel Audio Header Signal Names for Intel HD Audio - Intel DG43RK | English Product Guide - Page 9
Intel® Desktop Board DG43RK. Table 1 summarizes the major features of the board. Table 1. Feature Summary Form Factor Processor Main Memory [9.60 inches]) Support for an Intel® processor in the LGA775 package • Four 240-pin, DDR3 SDRAM Dual Inline Memory Module (DIMM) sockets • 1333 (over - Intel DG43RK | English Product Guide - Page 10
Intel Desktop Board DG43RK Product Guide Table 1. Feature Summary (continued) Peripheral Interfaces BIOS Power Management Hardware Management LAN Support • Twelve USB 2.0 ports: ― Six ports routed to the back panel ― Six ports routed to three front panel USB headers • Two IEEE 1394a ports: ― One - Intel DG43RK | English Product Guide - Page 11
Desktop Board Features Supported Operating Systems The Desktop Board supports the following operating systems: • Microsoft Windows* 7 Ultimate • Microsoft Windows 7 Home Premium • Microsoft Windows 7 Basic • Microsoft Windows Vista* Ultimate • Microsoft Windows Vista Enterprise • Microsoft Windows - Intel DG43RK | English Product Guide - Page 12
Intel Desktop Board DG43RK Product Guide Desktop Board Components Figure 1 shows the approximate location of the major components on Intel Desktop Board DG43RK. Figure 1. Intel Desktop Board DG43RK Components 12 - Intel DG43RK | English Product Guide - Page 13
2. Intel Desktop Board DG43RK Components Label A B C D E F G H I J K L M N O P Q R S T U V W X Y Z AA BB CC DD Description Front panel audio header PCI bus connector Speaker PCI Express x1 connector PCI Express x16 connector Battery PCI Express x1 connector Back panel connectors 12 V processor - Intel DG43RK | English Product Guide - Page 14
for Intel Desktop Board DG43RK http://www.intel.com/products/motherboard/DG43RK/in dex.htm • Supported processors http://processormatch.intel.com • Chipset information http://www.intel.com/products/desktop/chipsets/index. htm • BIOS and driver updates http://downloadcenter.intel.com - Intel DG43RK | English Product Guide - Page 15
Desktop Board Features Main Memory NOTE To be fully compliant with all applicable Intel ® SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If your memory modules do not support SPD, you will see a notification to this - Intel DG43RK | English Product Guide - Page 16
Intel Desktop Board DG43RK Product Guide Go to the following locations for more information about: • SDRAM specifications, http://intel.com/technology/memory/ • Installing memory, page 38 in Chapter 2 • Tested memory, http://cmtlabs.com/mbsearch.asp Intel® G43 Express Chipset The Intel G43 Express - Intel DG43RK | English Product Guide - Page 17
single cable. It is compatible with all ATSC and DVB HDTV standards and supports 8-channel digital audio. The HDMI port is compliant with the HDMI 1.3 specification. When a non-video PCI Express add-in card is installed in the PCI Express x16 connector on the Desktop Board, the HDMI port is disabled - Intel DG43RK | English Product Guide - Page 18
Intel Desktop Board DG43RK Product Guide Audio Subsystem The onboard audio subsystem consists of the following: • Intel ICH10 I/O controller hub • Realtek ALC888S 10-channel audio codec • Front panel audio header with support for: ⎯ Intel® High Definition Audio (Intel® HD Audio) ⎯ AC '97 Audio • - Intel DG43RK | English Product Guide - Page 19
port supports both keyboard and mouse, but not concurrently. Automatic PS/2 device detection will occur during boot and cannot be changed until the next system boot. LAN Subsystem The LAN subsystem includes: • Intel® ICH10 • Broadcom NetLink BCM5788 Gigabit (10/100/1000 Mb/s) Ethernet LAN controller - Intel DG43RK | English Product Guide - Page 20
about LAN software and drivers go to http://www.intel.com/support/motherboards/desktop Hi-Speed USB 2.0 Support The Desktop Board supports up to 12 USB 2.0 ports (six ports routed to the back panel and six ports routed to three internal headers) via ICH10. USB 2.0 ports are backward compatible with - Intel DG43RK | English Product Guide - Page 21
Desktop Board Features • ATA-66: DMA protocol on the ATA bus supporting host and target throttling and transfer rates of up to 66 MB/s. ATA-66 protocol is similar to Ultra DMA and is device driver compatible. • ATA-100: DMA protocol on the ATA bus allows host and target throttling. NOTE ATA-66 and - Intel DG43RK | English Product Guide - Page 22
Intel Desktop Board DG43RK Product Guide BIOS The BIOS provides the Power-On Self-Test (POST), the BIOS Setup program, the PCI/PCI Express auto-configuration utilities, and the video BIOS. The BIOS is stored in the Serial Peripheral Interface (SPI) Flash device. The BIOS can be updated by following - Intel DG43RK | English Product Guide - Page 23
Features Hardware Management Features The hardware management features of Intel Desktop Board DG43RK enable the board to be compatible with the Wired for Management (WfM) specification. The board has several hardware management features including the following: • Fan speed monitoring and control - Intel DG43RK | English Product Guide - Page 24
Intel Desktop Board DG43RK Product Guide Power Management Features Power management is implemented at several levels, including: • Software support through the Advanced Configuration and Power Interface (ACPI) • Hardware support: ⎯ Power connectors ⎯ Fan headers ⎯ LAN wake capabilities ⎯ Instantly - Intel DG43RK | English Product Guide - Page 25
control is used. If a 3-pin fan is detected, linear voltage control is used. The Desktop Board has a 4-pin processor fan header and two 4-pin chassis fan headers. LAN Wake Capabilities CAUTION For LAN wake capabilities, the 5 V standby line for the power supply must be capable of delivering adequate - Intel DG43RK | English Product Guide - Page 26
the memory module sockets and the PCI/PCI Express bus connectors. Figure 3. Location of the +5 V Standby Power Indicator For more information on standby current requirements for the Desktop Board, refer to the Technical Product Specification at http://www.intel.com/support/motherboards/desktop. Wake - Intel DG43RK | English Product Guide - Page 27
is mounted on the Desktop Board. The speaker provides audible error code (beep code) information during the Power-On Self-Test (POST). Battery A battery on the Desktop Board keeps the values in CMOS RAM and the clock current when the computer is turned off. Go to page 57 for instructions on how to - Intel DG43RK | English Product Guide - Page 28
Intel Desktop Board DG43RK Product Guide 28 - Intel DG43RK | English Product Guide - Page 29
• Install the I/O shield • Install and remove the Desktop Board • Install and remove a processor • Install and remove memory • Install and remove a PCI Express x16 card • Connect its power source and from any telecommunications links, networks, or modems before performing any of the procedures - Intel DG43RK | English Product Guide - Page 30
Intel Desktop Board DG43RK Product Guide Installation Precautions When you install and test the Desktop Board, observe all warnings and cautions in the installation instructions. To avoid injury, be careful of: • Sharp pins on connectors • Sharp pins on printed circuit assemblies • Rough edges and - Intel DG43RK | English Product Guide - Page 31
transmissions, protects internal components from dust and foreign objects, and promotes correct airflow within the chassis. Install the I/O shield before installing the Desktop Board in the chassis. Place the shield inside the chassis as shown in Figure 4. Press the shield into place so that it fits - Intel DG43RK | English Product Guide - Page 32
Intel Desktop Board DG43RK Product Guide Installing and Removing the Desktop Board CAUTION Only qualified manual for instructions on installing and removing the Desktop Board. Figure 5 shows the location of the mounting screw holes for Intel Desktop Board DG43RK. Figure 5. Intel Desktop Board DG43RK - Intel DG43RK | English Product Guide - Page 33
and remove a processor on the Desktop Board. Installing a Processor CAUTION Before installing or removing the processor, make sure the the processor and the board. To install a processor, follow these instructions: 1. Observe the precautions in "Before You Begin" on page 29. 2. Open the socket lever - Intel DG43RK | English Product Guide - Page 34
Intel Desktop Board DG43RK Product Guide 3. Lift the load plate (Figure 7, A). Do not touch the socket contacts (Figure 7, B). Figure 7. Lift the Load Plate 4. Remove the plastic protective socket cover from the load plate (Figure 8). Do not discard the protective socket cover. Always replace the - Intel DG43RK | English Product Guide - Page 35
and Replacing Desktop Board Components 5. Remove the processor from the protective processor cover. Hold the processor only at the edges, being careful not to touch the bottom of the processor (see Figure 9). Do not discard the protective processor cover. Always replace the processor cover if - Intel DG43RK | English Product Guide - Page 36
Desktop Board DG43RK Product Guide 7. Pressing down on the load plate (Figure 11, A), close and engage the socket lever (Figure 11, B). Figure 11. Close the Load Plate Installing a Processor Fan Heat Sink Intel Desktop Board DG43RK has mounting holes for a processor fan heat sink. For instructions - Intel DG43RK | English Product Guide - Page 37
Installing and Replacing Desktop Board Components Connecting the Processor Fan Heat Sink Cable Connect the processor fan heat sink cable to the 4-pin processor fan header (see Figure 12). A fan with a 4-pin connector as shown in Figure 12, A is recommended; however, a fan with a 3-pin connector ( - Intel DG43RK | English Product Guide - Page 38
Intel Desktop Board DG43RK Product Guide Installing and Removing Memory Intel Desktop board DG43RK has four 240-pin DDR3 DIMM sockets arranged as DIMM 0 and DIMM 1 in both Channel A and Channel B. Guidelines for Dual Channel Memory Configuration Before installing DIMMs, read and follow these - Intel DG43RK | English Product Guide - Page 39
Installing and Replacing Desktop Board Components If additional memory is to be used, install another matched pair of DIMMs in DIMM 1 (black) in channels A and B (see Figure 14). Figure 14. Dual Channel Memory Configuration with Four DIMMs Three DIMMs If you want to use three DIMMs in a dual-channel - Intel DG43RK | English Product Guide - Page 40
Intel Desktop Board DG43RK Product Guide Installing DIMMs To make sure you have the correct DIMM, place it on the illustration of the DDR3 DIMM in Figure 16. All the notches should match with the DDR3 DIMM. Figure 16. Use DDR3 DIMMs 40 - Intel DG43RK | English Product Guide - Page 41
Installing and Replacing Desktop Board Components To install a DIMM, follow these steps: 1. Observe Remove the computer's cover and locate the DIMM sockets (see Figure 17). Figure 17. Installing a DIMM 4. Make sure the clips at either end of the DIMM socket(s) are pushed outward to the open position. - Intel DG43RK | English Product Guide - Page 42
Intel Desktop Board DG43RK Product Guide 7. Insert the bottom edge of the DIMM into the socket. 8. When the DIMM is inserted, push down on the top edge of the DIMM until the retaining clips snap into place. Make sure the clips - Intel DG43RK | English Product Guide - Page 43
connector, an electrical short may result across the PCI Express connector pins. Depending on the over-current protection of the power supply, certain Desktop Board components and/or traces may be damaged. Installing a PCI Express x16 Card 1. Observe the precautions in "Before You Begin" on page 29 - Intel DG43RK | English Product Guide - Page 44
Intel Desktop Board DG43RK Product Guide Removing the PCI Express x16 Card Follow these instructions to remove the PCI Express x16 card from the connector: 1. Observe the precautions in "Before You Begin" on page 29. 2. Remove the screw (Figure 19, A) - Intel DG43RK | English Product Guide - Page 45
Desktop Board. The cable supports the ATA-66/100 transfer protocol. Figure 20 shows the correct installation of the cable. NOTES ATA-66/100 compatible cables are backward compatible the cable end with the single connector (blue) to the Intel Desktop Board (Figure 20, A). 3. Attach the cable end with - Intel DG43RK | English Product Guide - Page 46
Intel Desktop Board DG43RK Product Guide Connecting Serial ATA (SATA) Cables SATA cables support the Serial ATA (SATA) protocol. Each cable can be used to connect a single SATA drive to the Desktop Board. For correct cable function: 1. Observe the precautions in "Before You Begin" on page 29. 2. - Intel DG43RK | English Product Guide - Page 47
Installing and Replacing Desktop Board Components Connecting to Internal Headers Before connecting cables to the internal headers, observe the precautions in "Before You Begin" on page 29. Figure 22 shows the location of the internal headers. Figure 22. Internal Headers 47 - Intel DG43RK | English Product Guide - Page 48
Intel Desktop Board DG43RK Product Guide S/PDIF Header Figure 22, A shows the location of the S/ ) 4 +5 VDC Front Panel HD Audio Header The front panel audio header shown in Figure 22, B supports both Intel HD Audio and AC '97 Audio. Table 6 shows the pin assignments and signal names for HD Audio - Intel DG43RK | English Product Guide - Page 49
Installing and Replacing Desktop Board Components IEEE 1394a Header See Figure 22, C for the location of the IEEE 1394a header. Table 8 shows the pin assignments for the header. Table 8. IEEE - Intel DG43RK | English Product Guide - Page 50
Intel Desktop Board DG43RK Product Guide Pin Standard Signal Name ECP Signal Name 23 PERROR PE, ACKREVERSE# 24 GROUND GROUND 25 SELECT SELECT 26 KEY (no pin) KEY (no pin) EPP - Intel DG43RK | English Product Guide - Page 51
Installing and Replacing Desktop Board Components Front Panel Header See Figure 22, G for the location of the front panel header. Table 12 shows the pin assignments for the front panel - Intel DG43RK | English Product Guide - Page 52
Intel Desktop Board DG43RK Product Guide Chassis Intrusion Header Figure 22, I shows the location of the Signal Name 1 Ground 2 Intruder# Connecting to the Audio System After installing the audio driver, the multi-channel audio feature can be enabled. Figure 23 shows the back panel audio - Intel DG43RK | English Product Guide - Page 53
Installing and Replacing Desktop Board Components Connecting Chassis Fan and Power Supply Cables Chassis Fan Cables Connect chassis fan cables to the chassis fan headers on the Desktop Board. Figure 24 shows the location of the chassis fan headers. Figure 24. Location of the Chassis Fan Headers 53 - Intel DG43RK | English Product Guide - Page 54
Intel Desktop Board DG43RK Product Guide Power Supply Cables CAUTION Failure to use an appropriate power supply and/or not connecting the 12 V (2 x 2 pin) power connector to the Desktop Board may result in damage to the board or the system may not function properly. The 2 x 12 pin main power - Intel DG43RK | English Product Guide - Page 55
computer operation. Figure 26 shows the location of the Desktop Board's BIOS configuration jumper block. Figure 26. Location of the BIOS Configuration Jumper Block The three-pin BIOS jumper block enables board configuration to be done in the BIOS Setup program. Table 15 shows the jumper settings for - Intel DG43RK | English Product Guide - Page 56
Intel Desktop Board DG43RK Product Guide Table 15. Jumper Settings for the BIOS Setup Program Modes Jumper Setting Mode Normal (default) (1-2) Description The BIOS uses the current configuration and passwords for booting. Configure (2-3) After the Power-On Self-Test (POST) runs, the BIOS - Intel DG43RK | English Product Guide - Page 57
Desktop Board powers the real-time clock and CMOS memory. When the computer is not plugged into a wall socket, the battery has an estimated life of . When the voltage drops below a certain level, the BIOS Setup program settings stored in CMOS RAM (for example, the date and time) might not be - Intel DG43RK | English Product Guide - Page 58
Intel Desktop Board DG43RK Product Guide VIKTIGT! Risk för explosion om batteriet ersätts med felaktig batterityp. Batterier ska kasseras enligt de lokala miljövårdsbestämmelserna. VARO Räjähdysvaara, jos pariston tyyppi on väärä. - Intel DG43RK | English Product Guide - Page 59
Installing and Replacing Desktop Board Components UPOZORNÌNÍ V případě výměny baterie za nesprávný druh může dojít k výbuchu. Je-li to možné, baterie by měly být recyklovány. Baterie je třeba zlikvidovat v souladu s mí - Intel DG43RK | English Product Guide - Page 60
Intel Desktop Board DG43RK Product Guide UPOZORNENIE Ak batériu vymeníte za nesprávny typ, hrozí nebezpečenstvo jej výbuchu. Batérie by sa mali podľa možnosti vždy recyklovať. - Intel DG43RK | English Product Guide - Page 61
Installing and Replacing Desktop Board Components 61 - Intel DG43RK | English Product Guide - Page 62
Intel Desktop Board DG43RK Product Guide To replace the battery, follow these steps: 1. Observe the source (wall outlet or power adapter). 3. Remove the computer cover. 4. Locate the battery on the board (see Figure 27). 5. Gently lift the battery retention clip away from the battery holder as shown - Intel DG43RK | English Product Guide - Page 63
Web site: http://www.intel.com/support/motherboards/desktop/DG43RK 2. Navigate to the DG43RK page. Under the "Software and drivers" heading, click on "Latest BIOS" to locate the latest BIOS files. Click on the "BIOS Update" link and select the Express BIOS Update file. 3. Download the file to your - Intel DG43RK | English Product Guide - Page 64
Intel Desktop Board DG43RK Product Guide Updating the BIOS with the ISO Image BIOS Update File or the Iflash Memory Update Utility You can use the information in this section to update the BIOS using either the Iflash Memory Update Utility or the ISO Image BIOS update file. Obtaining the BIOS Update - Intel DG43RK | English Product Guide - Page 65
USB flash drive or other bootable USB media. The Iflash Memory update utility allows you to: • Update the BIOS and Intel Management Engine in flash memory • Update the language section of the BIOS NOTE Review the instructions distributed with the update utility before attempting a BIOS update. 65 - Intel DG43RK | English Product Guide - Page 66
Intel Desktop Board DG43RK Product Guide CAUTION Do not interrupt the process or the system may not function properly. 1. Uncompress the BIOS update file and copy the .BIO file, IFLASH.EXE, and .ITK file (optional) to a bootable USB flash drive or other bootable USB media. 2. Configure the BIOS or - Intel DG43RK | English Product Guide - Page 67
the board's speaker to beep and the front panel power LED to blink an error message indicating the problem. Table 16 and Table 17 list the BIOS codes. Table 16. BIOS Beep Codes Type F2 Setup/F10 Boot Menu Prompt BIOS update in progress Video error (no addin graphics card installed) Memory error - Intel DG43RK | English Product Guide - Page 68
Intel Desktop Board DG43RK Product Guide Table 17. Front-panel Power LED Blink Codes Type F2 Setup/F10 Boot Menu Prompt BIOS update in progress Video error (no addin graphics card installed) Memory error Thermal trip warning Pattern None Note Off when the update begins, then on for 0.5 second, - Intel DG43RK | English Product Guide - Page 69
Intel Desktop Board DG43RK: • Safety standards • European Union Declaration of Conformity statement • Product Ecology statements • Electromagnetic Compatibility (EMC) regulations • Product certifications Safety Standards Intel Desktop Board DG43RK this Desktop Board to provide instructions for - Intel DG43RK | English Product Guide - Page 70
Intel Desktop Board DG43RK Product Guide European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the product Intel® Desktop Board DG43RK is in conformity with all applicable essential requirements necessary for CE marking, following the - Intel DG43RK | English Product Guide - Page 71
. Please consult http://intel.com/intel/other/ehs/product_ecology for the details of this program, including the scope of covered products, available locations, shipping instructions, terms and conditions, etc Intel Product Recycling Program http://intel.com/intel/other/ehs/product_ecology 71 - Intel DG43RK | English Product Guide - Page 72
Intel Desktop Board DG43RK Product Guide Deutsch Als Teil von Intels Engagement für den Umweltschutz hat das Unternehmen das Intel Produkt-Recyclingprogramm implementiert, das Einzelhandelskunden von Intel , les instructions d'expédition, les conditions générales, etc. http://intel.com/intel/ot her - Intel DG43RK | English Product Guide - Page 73
dos produtos cobertos, os locais disponíveis, as instruções de envio, os termos e condições, etc. Russian Intel Intel (Product Recycling Program Intel http://intel.com/intel/other/ehs/product_ecology Türkçe Intel, çevre sorumluluğuna bağımlılığının bir parçası olarak, perakende tüketicilerin - Intel DG43RK | English Product Guide - Page 74
Intel Desktop Board DG43RK Product Guide China RoHS Intel Desktop Board DG43RK is a China RoHS-compliant product. The China Ministry of Information Industry (MII) stipulates that a material Self Declaration Table (SDT) must be included in a product's user documentation. The SDT for Intel Desktop - Intel DG43RK | English Product Guide - Page 75
Intel Desktop Board DG43RK complies with the EMC regulations stated in Table 20 when correctly installed in a compatible the EMC performance of this product, contact: Intel Corporation, 5200 N.E. Elam Young Parkway and used in accordance with the instructions, may cause harmful interference to radio - Intel DG43RK | English Product Guide - Page 76
Intel Desktop Board DG43RK Product Guide radio or television reception, help. Any changes or modifications to the equipment not expressly approved by Intel Corporation could void the user's authority to operate the equipment. Tested to comply use the equipment according to the instruction manual. 76 - Intel DG43RK | English Product Guide - Page 77
only in residential areas, but also other areas. Ensure Electromagnetic Compatibility (EMC) Compliance Before computer integration, make sure that the when reading the installation instructions for the host chassis, power supply, and other modules: • Product certifications or lack of certifications - Intel DG43RK | English Product Guide - Page 78
Intel Desktop Board DG43RK Product Guide Product Certifications Board-Level Certification Markings Intel Desktop Board DG43RK has the product certification markings shown in Table 21. Table 21. Product Certification Markings Description UL joint US/Canada Recognized Component mark. Includes - Intel DG43RK | English Product Guide - Page 79
at the front of this product guide demonstrates compliance with Canadian EMC recommended configurations, go to http://www.intel.com/go/energystar. The Desktop Board also meets the following international requirements: • Republic of Korea e-Standby program • European Union Energy using Products - Intel DG43RK | English Product Guide - Page 80
Intel Desktop Board DG43RK Product Guide 80
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
 |
 |
Intel
®
Desktop Board DG43RK
Product Guide
Order Number:
E88305-001