Intel DP43BFL Product Specification

Intel DP43BFL Manual

Get Intel DP43BFL PDF manuals and user guides View all Intel DP43BFL manuals
Add to My Manuals
Save this manual to your list of manuals

Intel DP43BFL manual content summary:

  • Intel DP43BFL | Product Specification - Page 1
    Specification January 2012 Order Number: E89938-002 The Intel® Desktop Board DP43BF may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata are documented in the Intel Desktop Board DP43BF Specification
  • Intel DP43BFL | Product Specification - Page 2
    errata are available on request. Contact your local Intel sales office or your distributor to obtain the latest specifications before placing your product order. Intel, the Intel logo, Core, Pentium, Xeon, and Celeron are trademarks of Intel Corporation in the U.S. and/or other countries. * Other
  • Intel DP43BFL | Product Specification - Page 3
    : Device P43 ICH10R Stepping A2 A0 S-Spec Numbers SLB89 SLB8S Specification Changes or Clarifications Table 1 indicates the Specification Changes or Specification Clarifications that apply to the Intel® Desktop Board DP43BF. Table 1. Specification Changes or Clarifications Date Type of Change
  • Intel DP43BFL | Product Specification - Page 4
    Intel Desktop Board D410PT Technical Product Specification iv
  • Intel DP43BFL | Product Specification - Page 5
    Preface This Technical Product Specification (TPS) specifies the board layout, components, connectors, power and environmental requirements, and the BIOS for the Intel® Desktop Board DP43BF. It describes the standard product and available manufacturing options. Intended Audience The TPS is
  • Intel DP43BFL | Product Specification - Page 6
    Intel Desktop Board DP43BF Technical Product Specification Other Common Notation # GB GB/s Gb Gb/s KB Kb kb/s MB MB/s Mb Mb/s xxh x.x V * Used after a signal name to identify an active-low signal (such as USBP0#) Gigabyte (1,073,741,824 bytes) Gigabytes per second Gigabit (1,073,741,
  • Intel DP43BFL | Product Specification - Page 7
    Support 16 1.4 Processor 17 1.5 System Memory 18 1.5.1 Memory Configurations 19 1.6 Intel® P43 Express Chipset 21 1.6.2 USB 21 1.6.3 ATA Support 22 Connectors 43 2.2.2 Component-side Connectors and Headers 44 2.3 BIOS Configuration Jumper Block 54 2.4 Mechanical Considerations 55 2.4.1
  • Intel DP43BFL | Product Specification - Page 8
    Intel Desktop Board DP43BF Technical Product Specification 2.5.1 Power Supply Considerations 56 2.5.2 Fan Header Current Capability 56 2.5.3 Add-in Board Considerations 57 2.6 Thermal Considerations 57 2.7 Reliability 59 2.8 Environmental 59 3 Overview of BIOS Features 3.1 Introduction 61 3.2
  • Intel DP43BFL | Product Specification - Page 9
    53 14. Location of the BIOS Configuration Jumper Block 54 15. Board Dimensions 55 16. Localized High Temperature Zones 58 Tables 1. Specification Changes or Clarifications iii 2. Feature Summary 11 3. Board Components Shown in Figure 1 14 4. Supported Memory Configurations 18 5. Audio Jack
  • Intel DP43BFL | Product Specification - Page 10
    Capability 56 30. Thermal Considerations for Components 58 31. Intel Desktop Board DP43BF Environmental Specifications 59 32. BIOS Setup Program Menu Bar 62 33. BIOS Setup Program Function Keys 62 34. Acceptable Drives/Media Types for BIOS Recovery 66 35. Boot Device Menu Options 67 36
  • Intel DP43BFL | Product Specification - Page 11
    Board DP43BF. Table 2. Feature Summary Form Factor ATX (9.60 inches by 11.60 inches [243.84 millimeters by 294.64 millimeters]) Processor Memory Chipset Support for the following: • Intel® Core™2 Quad processor Q6000/Q8000/Q9000 Series in an LGA775 socket • Intel® Core™2 Duo processor E4000
  • Intel DP43BFL | Product Specification - Page 12
    Intel Desktop Board DP43BF Technical Product Specification Table 2. Feature Summary LAN Support BIOS Instantly Available PC Technology Expansion Capabilities Hardware Monitor Subsystem Gigabit (10/100/1000 Mb/s) LAN subsystem using the Broadcom* BCM57788 Gigabit Ethernet Controller • Intel® BIOS
  • Intel DP43BFL | Product Specification - Page 13
    Product Description 1.1.2 Board Layout Figure 1 shows the location of the board's major components. Figure 1. Major Board Components Table 3 lists the components identified in Figure 1. 13
  • Intel DP43BFL | Product Specification - Page 14
    Intel Desktop Board DP43BF Technical Product Specification Table 3. Board Components Shown in Processor core power connector (2 x 2) N Rear chassis fan header O LGA775 processor socket P Intel 82P43 MCH Q Processor fan header R DIMM Channel A sockets S DIMM Channel B sockets T BIOS
  • Intel DP43BFL | Product Specification - Page 15
    Product Description 1.1.3 Block Diagram Figure 2 is a block diagram of the board's major functional areas. Figure 2. Block Diagram 15
  • Intel DP43BFL | Product Specification - Page 16
    DP43BF Supported processors Chipset information BIOS and driver updates Tested memory Integration information Visit this World Wide Web site: http://www.intel.com/products/motherboard/DP43BF/index.htm http://www.intel.com/support/motherboards/desktop http://www.intel.com/products/motherboard/DP43BF
  • Intel DP43BFL | Product Specification - Page 17
    The board is designed to support the following processors: • Intel® Core™2 Quad processor Q6000/Q8000/Q9000 Series in an LGA775 socket • Intel® Core™2 Duo processor E4000/E6000/E7000/E8000 Series in an LGA775 socket • Intel® Pentium® Dual-Core processor E2000/E5000 Series in an LGA775 socket
  • Intel DP43BFL | Product Specification - Page 18
    Intel Desktop Board DP43BF Technical Product Specification 1.5 System Memory The board has four DIMM sockets and supports the following memory features: • 1.8 V DDR3 800 MHz, DDR3 1066 MHz, and DDR3 1333 (OC) MHz SDRAM DIMMs • Two independent memory channels with interleaved mode support •
  • Intel DP43BFL | Product Specification - Page 19
    Product Description 1.5.1 Memory Configurations The Intel 82P43 MCH supports the following types of memory organization: • Dual channel (Interleaved) mode. . For information about... Memory Configuration Examples Refer to: http://www.intel.com/support/motherboards/desktop/sb/ cs-011965.htm 19
  • Intel DP43BFL | Product Specification - Page 20
    Intel Desktop Board DP43BF Technical Product Specification Figure 3 illustrates the memory channel and DIMM configuration. Figure 3. Memory Channel and DIMM Configuration 20
  • Intel DP43BFL | Product Specification - Page 21
    PCI Express 2.0 x16: ⎯ Supports PCI Express GEN1 frequency of 1.25 GHz resulting in 2.5 Gb/s each direction (500 MB/s total). Maximum theoretical bandwidth The board supports up to twelve USB 2.0 ports, supports UHCI and EHCI, and uses UHCI- and EHCI-compatible drivers. The Intel ICH10R provides
  • Intel DP43BFL | Product Specification - Page 22
    Intel Desktop Board DP43BF Technical Product Specification 1.6.3 ATA Support The board provides seven ATA interface connectors: • One PATA connector that supports two devices • Five SATA connectors that support one device per connector • One eSATA connector 1.6.3.1 PATA Interface The discrete PATA
  • Intel DP43BFL | Product Specification - Page 23
    XP and Windows Vista operating systems. For information about Obtaining AHCI driver The location of the SATA connectors Refer to Section 1.3, page 16 Figure 10, page 44 1.6.3.2.1 Serial ATA RAID The board supports the Intel® Matrix Storage Technology which provides the following RAID (Redundant
  • Intel DP43BFL | Product Specification - Page 24
    Intel Desktop Board DP43BF Technical Product Specification 1.7 Real-Time Clock Subsystem A coin-cell battery ( on the component side of the board. The serial port supports data transfers at speeds up to 115.2 kb/s with BIOS support. For information about The location of the serial port header
  • Intel DP43BFL | Product Specification - Page 25
    the following audio connectors and headers: • S/PDIF header • Front panel audio header with support for Intel® High Definition Audio (Intel® HD Audio) and AC '97 audio • Back panel audio connectors NOTE Systems built with an AC '97 audio front panel will not be able to
  • Intel DP43BFL | Product Specification - Page 26
    Desktop Board DP43BF Technical Product Specification 1.9.1 Audio Subsystem Software Audio software and drivers are available from Intel's World Wide Web site. For information about Obtaining audio software and drivers Refer to Section 1.2, page 16 1.9.2 Audio Connectors and Headers The board
  • Intel DP43BFL | Product Specification - Page 27
    Gigabit Ethernet Controller (10/100/1000 Mb/s) • Intel 82801JIR (Intel ICH10R) • RJ-45 LAN connector with support meeting ACPI requirements • Full device driver compatibility • PCI Express power management support 1.10.2 LAN Subsystem Software LAN software and drivers are available from Intel
  • Intel DP43BFL | Product Specification - Page 28
    Intel Desktop Board DP43BF Technical Product Specification 1.10.3 RJ-45 LAN Connector with Integrated LEDs Two LEDs are built into the RJ- (A) Green On Blinking LAN link is established LAN activity occurring N/A Off 10 Mb/s data rate Speed (B) Green On 100 Mb/s data rate Yellow On 1000
  • Intel DP43BFL | Product Specification - Page 29
    the Wired for Management (WfM) specification. The board has several hardware sensing • Thermal sensors in the processor, Intel 82P43 MCH, and Intel 82801JIR (Intel ICH10R) • Power supply monitoring of 35 1.11.3 Chassis Intrusion Detection The board supports a chassis security feature that detects if
  • Intel DP43BFL | Product Specification - Page 30
    Intel Desktop Board DP43BF Technical Product Specification 1.11.4 Thermal Monitoring Figure 6 shows the locations of the thermal sensors and fan headers. Item A B C D E F G Description Rear chassis fan header Thermal diode, located on the processor die Thermal diode, located on the MCH die
  • Intel DP43BFL | Product Specification - Page 31
    and S3 only) ⎯ Power Management Event signal (PME#) wake-up support ⎯ WAKE# signal wake-up support ⎯ Wake from PS/2 device ⎯ Wake from serial port 1.12 , add-in boards (some add-in boards may require an ACPI-aware driver), video displays, and hard disk drives • Methods for achieving less than
  • Intel DP43BFL | Product Specification - Page 32
    Intel Desktop Board DP43BF Technical Product Specification supported by the board along with the associated system power targets. See the ACPI specification - idle state G1 - sleeping state S1 - Processor stopped C3 - sleep C4 - deep sleep C1 power to the system. Service can be performed safely.
  • Intel DP43BFL | Product Specification - Page 33
    9 lists the devices or specific events that can wake the computer from specific states. Table 9. Wake-up BIOS. NOTE The use of these wake-up events from an ACPI state requires an operating system that provides full ACPI support. In addition, software, drivers, and peripherals must fully support
  • Intel DP43BFL | Product Specification - Page 34
    Intel Desktop Board DP43BF Technical Product Specification 1.12.2 Hardware Support CAUTION Ensure that the power supply ). The computer's response can be set using the Last Power State feature in the BIOS Setup program's Boot menu. For information about The location of the main power connector The
  • Intel DP43BFL | Product Specification - Page 35
    board is off or in the S3, S4, or S5 state. • The processor fan header is wired to a fan tachometer input. The front and rear fan headers . • All fan headers have a +12 V DC connection. • The system fan headers support auto-detection for 4-pin and 3-pin system fans. If a 4-pin system fan is detected
  • Intel DP43BFL | Product Specification - Page 36
    Intel Desktop Board DP43BF Technical Product Specification 1.12.2.4 support this specification can participate in power management and can be used to wake the computer. The use of Instantly Available PC technology requires operating system support and PCI 2.3 compliant add-in cards and drivers
  • Intel DP43BFL | Product Specification - Page 37
    Product Description 1.12.2.9 Wake from Serial Port Serial port activity wakes the computer from an ACPI S1 or S3 state. 1.12.2.10 +5 V Standby Power Indicator LED The +5 V standby power indicator LED shows that power is still present even when the computer appears to be off. Figure 7 shows the
  • Intel DP43BFL | Product Specification - Page 38
    Desktop Board DP43BF Technical Product Specification 1.12.3 ENERGY STAR* 5.0, e-Standby, and ErP Compliance The US Department of Energy and the US Environmental Protection Agency have continually revised the ENERGY STAR requirements. Intel has worked directly with these two governmental agencies
  • Intel DP43BFL | Product Specification - Page 39
    space, BIOS (SPI Flash MB) • MCH base address registers, internal graphics ranges, PCI Express ports (up to 512 MB) • Memory-mapped I/O that is dynamically allocated for Conventional PCI and PCI Express add-in cards • Base graphics memory support (1 MB or 8 MB) • Intel MEI single channel (8 MB
  • Intel DP43BFL | Product Specification - Page 40
    Intel Desktop Board DP43BF Technical Product Specification The amount of installed memory that can be used will vary based on add-in cards, BIOS settings, and operating system installed. Figure 8 shows a schematic of the system memory map. All installed system memory can be used when there is no
  • Intel DP43BFL | Product Specification - Page 41
    K 639 K - 640 K 512 K - 639 K 0 K - 512 K A0000 - C7FFF 9FC00 - 9FFFF 80000 - 9FBFF 00000 - 7FFFF Size 8191 MB 64 KB 64 KB 96 KB 160 KB 1 KB 127 KB 512 KB Description Extended memory Runtime BIOS Reserved Potential available high DOS memory (open to the Conventional PCI bus). Dependent on video
  • Intel DP43BFL | Product Specification - Page 42
    Intel Desktop Board DP43BF Technical Product Specification 2.2 Connectors and Headers CAUTION Only the following connectors have overcurrent protection: Back panel and front panel USB, PS/2, and IEEE 1394a. The other internal connectors/
  • Intel DP43BFL | Product Specification - Page 43
    2.2.1 Back Panel Connectors Figure 9 shows the location of the back panel connectors. Technical Reference Item A B C D E F G H I J K L M N Description PS/2 keyboard/mouse port PS/2 keyboard/mouse port eSATA connector USB ports (2) IEEE 1394a connector USB ports (2) LAN USB ports (2) Rear surround
  • Intel DP43BFL | Product Specification - Page 44
    Intel Desktop Board DP43BF Technical Product Specification 2.2.2 Component-side Connectors and Headers Figure 10 shows the locations of the component-side connectors and headers. Figure 10. Component-side Connectors and Headers 44
  • Intel DP43BFL | Product Specification - Page 45
    Front panel IEEE 1394a header J Processor core power connector (2 x 2) K Rear chassis fan header L Processor fan header M Front panel header U Front panel USB header V Front panel USB header W Intel High Definition Audio Link header X Chassis intrusion header Y Serial port
  • Intel DP43BFL | Product Specification - Page 46
    Intel Desktop Board DP43BF Technical Product Specification 2.2.2.1 Signal Tables for the Connectors and Headers Table 12. Front Panel Audio Header for HD Audio Pin Signal Name Pin Signal Name 1 [Port 1] Left channel 3 [
  • Intel DP43BFL | Product Specification - Page 47
    Data 7 Data 6 Data 5 Data 4 Data 3 Data 2 Data 1 Data 0 GND DMA Request #IOW #IOR IO Chrdy DMA Acknowledge IRQ14 Addr 1 Addr 0 #CS0 (1F0-1F7) #Active (LED driver) +5V_DC (logic) GND Pin 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 Signal Name GND
  • Intel DP43BFL | Product Specification - Page 48
    Intel Desktop Board DP43BF Technical Product Specification Table 18. Chassis Intrusion Header Pin Signal Name 1 Intruder# 2 Ground Table 19. Processor PCI Express 1.1 x1 connectors. The x1 interface supports simultaneous transfer speeds up to 250 MB/s of peak bandwidth per direction and up to
  • Intel DP43BFL | Product Specification - Page 49
    . The board supports the use of ATX12V power supplies with either 2 x 10 or 2 x 12 main power cables. When using a power supply with a 2 x 10 main power cable, attach that cable on the rightmost pins of the main power connector, leaving pins 11, 12, 23, and 24 unconnected. • Processor core power
  • Intel DP43BFL | Product Specification - Page 50
    Intel Desktop Board DP43BF Technical Product Specification 2.2.2.4 Front Panel Header This section describes the functions of the front panel header. Table 23 lists the signal names of the front panel header. Figure
  • Intel DP43BFL | Product Specification - Page 51
    Running Steady Yellow Sleeping NOTE The colors listed in Table 24 and Table 25 are suggested colors only. Actual LED colors are chassis-specific. 2.2.2.4.4 Power Switch Header Pins 6 and 8 can be connected to a front panel momentary-contact power switch. The switch must pull the SW_ON# pin to
  • Intel DP43BFL | Product Specification - Page 52
    Intel Desktop Board DP43BF Technical Product Specification 2.2.2.5 Alternate Front Panel Power LED Header Pins 1 and 3 of this • Use only a front panel USB connector that conforms to the USB 2.0 specification for high-speed USB devices. Figure 12. Connection Diagram for Front Panel USB Headers 52
  • Intel DP43BFL | Product Specification - Page 53
    Technical Reference 2.2.2.7 Front Panel IEEE 1394a Header Figure 13 is a connection diagram for the IEEE 1394a header. NOTE • The +12 V DC power on the IEEE 1394a header is fused. • The IEEE 1394a header provides one IEEE 1394a port. Figure 13. Connection Diagram for IEEE 1394a Header 53
  • Intel DP43BFL | Product Specification - Page 54
    Intel Desktop Board DP43BF Technical Product Specification 2.3 BIOS Configuration Jumper Block CAUTION Do not move the BIOS compares the processor version and the microcode version in the BIOS and reports if the two match. Figure 14. Location of the BIOS Configuration Jumper Block Table 27. BIOS
  • Intel DP43BFL | Product Specification - Page 55
    2.4 Mechanical Considerations 2.4.1 Form Factor The board is designed to fit into an ATX-form-factor chassis. Figure 15 illustrates the mechanical form factor for the board. Location of the I/O connectors and mounting holes are in compliance with the ATX specification. Figure 15. Board Dimensions 55
  • Intel DP43BFL | Product Specification - Page 56
    parameters of the ATX form factor specification. • The potential relation between 3.3 VDC and +5 VDC power rails • The current capability of the +5 VSB line • All timing parameters • All voltage tolerances For example, for a system consisting of a supported 65 W processor (see Section 1.4 on
  • Intel DP43BFL | Product Specification - Page 57
    remains solely with the reader. Intel makes no warranties or representations that merely following the instructions presented in this document will , see the environmental specifications in Section 2.8. CAUTION Ensure that proper airflow is maintained in the processor voltage regulator circuit.
  • Intel DP43BFL | Product Specification - Page 58
    Intel Desktop Board DP43BF Technical Product Specification Figure 16 shows the locations of the localized high temperature zones. Item A B C D Description Processor voltage regulator area Processor Intel 82P43 MCH Intel 82801JIR (Intel ICH10R) Figure 16. Localized High Temperature Zones Table 30
  • Intel DP43BFL | Product Specification - Page 59
    Processor datasheets and specification updates Intel P43 Express chipset datasheets, specification updates, and design guides Refer to Section 1.2, page 16 http://www.intel specifications for the board. Table 31. Intel Desktop Board DP43BF Environmental Specifications Parameter Specification
  • Intel DP43BFL | Product Specification - Page 60
    Intel Desktop Board DP43BF Technical Product Specification 60
  • Intel DP43BFL | Product Specification - Page 61
    uses an Intel BIOS that is stored in the Serial Peripheral Interface Flash Memory (SPI Flash) and can be updated using a disk-based program. The SPI Flash contains the BIOS Setup program, POST, the PCI auto-configuration utility, LAN EEPROM information, and Plug and Play support. The BIOS displays
  • Intel DP43BFL | Product Specification - Page 62
    Intel Desktop Board DP43BF Technical Product Specification Table 32 lists the BIOS Setup program menu features. Table 32. BIOS Setup Program Menu Bar Maintenance Main Advanced Security Clears passwords and displays processor information Displays processor and memory configuration Configures
  • Intel DP43BFL | Product Specification - Page 63
    and processor speed • Dynamic data, such as event detection and error logging Non-Plug and Play operating systems require an additional interface for obtaining the SMBIOS information. The BIOS supports an SMBIOS table interface for such operating systems. Using this support, an SMBIOS service-level
  • Intel DP43BFL | Product Specification - Page 64
    Intel Desktop Board DP43BF Technical Product Specification 3.5 Legacy USB Support Legacy USB support enables USB devices to be used even when the operating system's USB drivers are not yet available. Legacy USB support is used to access the BIOS Setup program, and to install an operating system that
  • Intel DP43BFL | Product Specification - Page 65
    an incompatible BIOS. NOTE Review the instructions distributed with the upgrade utility before attempting a BIOS update. For information about BIOS update utilities Refer to http://support.intel.com/support/motherboards/desktop/sb/ CS-022312.htm. 3.6.1 Language Support The BIOS Setup program
  • Intel DP43BFL | Product Specification - Page 66
    drive No Legacy diskette drive (with a 1.44 MB diskette) connected to the No legacy diskette drive interface For information about BIOS recovery Refer to http://support.intel.com/support/motherboards/desktop/ sb/CS-023360.htm 3.8 Boot Options In the BIOS Setup program, the user can choose to
  • Intel DP43BFL | Product Specification - Page 67
    key during POST causes a boot device menu to be displayed. This menu displays the list of available boot devices (as set in the BIOS setup program's Boot Device Priority Submenu). Table 35 lists the boot device menu options. Table 35. Boot Device Menu Options Boot Device Menu Function Keys
  • Intel DP43BFL | Product Specification - Page 68
    Intel Desktop Board DP43BF Technical Product Specification 3.9.2 BIOS Boot Optimizations Use of the following BIOS Setup program settings reduces the boot process to the point where the system boots so quickly that the Intel logo screen (or a custom logo splash screen) will not be seen. Monitors
  • Intel DP43BFL | Product Specification - Page 69
    Setup program. This is the user mode. • If only the supervisor password is set, pressing the key at the password prompt of the BIOS Setup program allows the user restricted access to Setup. • If both the supervisor and user passwords are set, users can enter either the supervisor password
  • Intel DP43BFL | Product Specification - Page 70
    Intel Desktop Board DP43BF Technical Product Specification 70
  • Intel DP43BFL | Product Specification - Page 71
    Beep Codes Whenever a recoverable error occurs during POST, the BIOS causes the board's speaker to beep an error message describing the problem (see Table 37). Table 37. BIOS Beep Codes Type Pattern Frequency Processor initialization complete One 0.5 second beep when the CPU initialization
  • Intel DP43BFL | Product Specification - Page 72
    Intel Desktop Board DP43BF Technical Product Specification 4.3 Front-panel Power LED Blink Codes Whenever a recoverable error occurs during POST, the BIOS causes the board's front panel power LED to blink an error message describing the problem (see Table 38). Table 38. Front-panel Power LED
  • Intel DP43BFL | Product Specification - Page 73
    connector 1. The following tables provide information about the POST codes generated by the BIOS: • Table 40 lists the Port 80h POST code ranges • Table 41 00 - 0F Debug codes: Can be used by any PEIM/driver for debug. 10 - 1F Host Processors: 1F is an unrecoverable CPU error. 20 - 2F Memory/
  • Intel DP43BFL | Product Specification - Page 74
    Intel Desktop Board DP43BF Technical Product Specification Table 41. Port 80h POST Codes POST Code Description of POST Operation Host Processor 10 Power-on initialization of the host processor (Boot Strap Processor) 11 Host processor cache initialization (including APs) 12 Starting
  • Intel DP43BFL | Product Specification - Page 75
    keyboard 93 Enabling the keyboard 94 Clearing keyboard input buffer 95 Instructing keyboard controller to run Self Test (PS/2 only) Mouse media BDS Dy Trying boot selection y (y=0 to 15) PEI Core E0 Started dispatching PEIMs (emitted on first report of EFI_SW_PC_INIT_BEGIN
  • Intel DP43BFL | Product Specification - Page 76
    Intel Desktop Board DP43BF Technical Product Specification Table 41. Port 80h POST Codes (continued) POST Code Description of POST Operation DXE Drivers E7 Waiting for user input E8 Checking password E9 Entering BIOS setup EB Calling Legacy Option ROMs Runtime Phase/EFI OS Boot F4
  • Intel DP43BFL | Product Specification - Page 77
    recovery capsule E4 Entered DXE phase 12 Starting application processor initialization 13 SMM initialization 50 Enumerating PCI busses 51 94 Clearing keyboard input buffer 95 Keyboard Self Test EB Calling Video BIOS 58 Resetting USB bus 5A Resetting PATA/SATA bus and all devices
  • Intel DP43BFL | Product Specification - Page 78
    Intel Desktop Board DP43BF Technical Product Specification 78
  • Intel DP43BFL | Product Specification - Page 79
    of Conformity statement • Product Ecology statements • Electromagnetic Compatibility (EMC) standards • Product certification markings 5.1.1 Safety Standards Intel Desktop Board DP43BF complies with the safety standards stated in Table 43 when correctly installed in a compatible host system. Table
  • Intel DP43BFL | Product Specification - Page 80
    Desktop Board DP43BF Technical Product Specification 5.1.2 European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the product Intel® Desktop Board DP43BF is in conformity with all applicable essential requirements necessary for CE
  • Intel DP43BFL | Product Specification - Page 81
    of this program, including the scope of covered products, available locations, shipping instructions, terms and conditions, etc Intel Product Recycling Program http://www.intel.com/intel/other/ehs/product_ecology Deutsch Als Teil von Intels Engagement für den Umweltschutz hat das Unternehmen das
  • Intel DP43BFL | Product Specification - Page 82
    Intel Desktop Board DP43BF Technical Product Specification Español Como parte de su compromiso de responsabilidad medioambiental, Intel ha implantado el programa de reciclaje de productos Intel, que permite que los consumidores al detalle de los productos Intel devuelvan los productos usados en los
  • Intel DP43BFL | Product Specification - Page 83
    Bu programın ürün kapsamı, ürün iade merkezleri, nakliye talimatları, kayıtlar ve şartlar v.s dahil bütün ayrıntılarını ögrenmek için lütfen http://www.intel.com/intel/other/ehs/product_ecology Web sayfasına gidin. 5.1.3.3 Lead Free Desktop Board This Desktop Board is a European Union Restriction of
  • Intel DP43BFL | Product Specification - Page 84
    Intel Desktop Board DP43BF Technical Product Specification Table 44. Lead-Free Board Markings Description Lead-Free 2nd Level Interconnect: This symbol is used to identify electrical and electronic assemblies and components in
  • Intel DP43BFL | Product Specification - Page 85
    Regulatory Compliance and Battery Disposal Information 5.1.4 EMC Regulations Intel Desktop Board DP43BF complies with the EMC regulations stated in Table 45 when correctly installed in , it may cause radio interference. Install and use the equipment according to the instruction manual. 85
  • Intel DP43BFL | Product Specification - Page 86
    Intel Desktop Board DP43BF Technical Product Specification Korean Class B statement translation: this is household equipment non-residential environments. 5.1.5 Product Certification Markings (Board Level) Intel Desktop Board DP43BF has the product certification markings shown in Table 46. Table
  • Intel DP43BFL | Product Specification - Page 87
    Regulatory Compliance and Battery Disposal Information 5.2 Battery Disposal Information CAUTION Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations.
  • Intel DP43BFL | Product Specification - Page 88
    Intel Desktop Board DP43BF Technical Product Specification PRECAUCIÓN Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del mismo tipo que las recomendadas por
  • Intel DP43BFL | Product Specification - Page 89
    Regulatory Compliance and Battery Disposal Information AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar tempatan. OSTRZEŻENIE Istnieje niebezpieczeństwo
  • Intel DP43BFL | Product Specification - Page 90
    Intel Desktop Board DP43BF Technical Product Specification 90
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
Intel® Desktop Board
DP43BF
Technical Product Specification
January 2012
Order Number:
E89938-002
The Intel
®
Desktop Board DP43BF may contain design defects or errors known as errata that may cause the product to deviate from published specifications.
Current characterized errata are documented in the Intel Desktop Board DP43BF Specification Update.