Home » Intel Manuals » Servers » Intel S1400FP » Manual Viewer

Intel S1400FP Specification update

Intel S1400FP Manual

Get Intel S1400FP PDF manuals and user guides

View all Intel S1400FP manuals

Add to My Manuals
Save this manual to your list of manuals

Intel S1400FP manual content summary:

Intel S1400FP | Specification update - Page 1
Monthly Specification Update Intel® Server Board S1400FP Family Intel® Server System P4000FP Family July, 2012 Enterprise Platforms and Services Marketing
Intel S1400FP | Specification update - Page 2
at any time, without notice. Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order. Intel, Itanium, Pentium, and Xeon are trademarks or registered trademarks of Intel Corporation. *Other brands and names may be claimed as
Intel S1400FP | Specification update - Page 3
Action button not functional ...6 11. IPMI Get Chassis Status command returns incorrect Chassis Identify State. .........7 12. The BIOS and ME Firmware can't be updated successfully using Intel® One Boot Flash Update Utility(OFU) under SuSE* Linux Enterprise Server 11 (64-bit) with SP2 7 13
Intel S1400FP | Specification update - Page 4
Enterprise Platforms and Services Marketing Monthly Specification Update IV
Intel S1400FP | Specification update - Page 5
Enterprise Platforms and Services Marketing Monthly Specification Update Preface This document is an update to the specifications contained in the Intel® Server Board S1400FP Family and Intel ® Server System P4000FP Family Technical Product Specification. It is intended for hardware system
Intel S1400FP | Specification update - Page 6
Action button not functional. 11. Fix IPMI Get Chassis Status command returns incorrect Chassis Identify State. 12. Fix The BIOS and ME Firmware can't be updated successfully using Intel® One Boot Flash Update Utility (OFU) under SuSE* Linux Enterprise Server 11 (64-bit) with SP2 13. Fix BMC
Intel S1400FP | Specification update - Page 7
Enterprise Platforms and Services Marketing Monthly Specification Update No. Plans Description of Errata 22. Fix WOL (Wake on LAN) may not function under Red Hat* Linux 6.2 64bit OS No. 1. Plans Table 2. Documentation Changes
Intel S1400FP | Specification update - Page 8
mode Problem Intel® RSTe mode is not supported on Red Hat* Linux and SUSE* Linux. Implication User may not able to install Red Hat* Linux and SUSE* Linux on Intel® C600 Series Chipset based Server Boards under Intel® RSTe mode. Status This issue may be fixed in future driver or BIOS releases
Intel S1400FP | Specification update - Page 9
in a future RAID driver. Workaround The workaround is to either plug a SATA device into one of the AHCI SATA ports, or disable the onboard AHCI controller in BIOS. 6. System may halt under specific BIOS configurations Problem Once BIOS options "EFI Optimized Boot" and "Memory Mapped I/O Above
Intel S1400FP | Specification update - Page 10
Services Marketing Implication Status Workaround User may not able to install Microsoft Windows Server 2003* x86 on mentined BIOS configuration. This issue may be fixed in a future RSTe driver release. None. 8. System may halt under unsupported configuration in ESRT2 mode Problem If no Intel
Intel S1400FP | Specification update - Page 11
when the Chassis Identify LED is on. Status This issue may be fixed in a future BMC release. Workaround None. 12. The BIOS and ME Firmware can't be updated successfully using Intel® One Boot Flash Update Utility (OFU) under SuSE* Linux Enterprise Server 11 (64-bit) with SP2 Problem OFU will
Intel S1400FP | Specification update - Page 12
and Services Marketing 14. High CPU utilization may occur when installing or running Microsoft Windows Server 2008* R2 or Microsoft Windows* 7 with default NIC driver for Intel® Gigabit ET Dual Port Server Adapter E1G42ET and Intel® Gigabit ET Quad Port Server Adapter E1G44ET Problem There
Intel S1400FP | Specification update - Page 13
Services Marketing Monthly Specification Update Status Workaround This issue may be fixed in a future BIOS release. None. 17. On-board VGA cannot be set to the highest resolution (1920x1080 and higher) Problem The Graphics ID register in the on-board identified in the motherboard BMC. Status
Intel S1400FP | Specification update - Page 14
Update Enterprise Platforms and Services Marketing 20. Fault LED on 4x3.5" hot swap HDD cage may not function normally during RAID rebuilding with AHCI ESRTII RAID configuration Problem function under Red Hat* Linux 6.2 64bit OS Problem With Intel® LAN driver version 17.1, WOL (Wake on LAN) may
Intel S1400FP | Specification update - Page 15
Enterprise Platforms and Services Marketing Documentation Changes N/A Monthly Specification Update 11

Section	Page
Preface	5
1. Nomenclature	5
2. Product Scope	5
Summary Tables of Changes	6
Errata	8
1. Linux* Operating Systems are not supported on RSTe mode	8
2. UEFI Microsoft Windows Server 2008* R2 SP1 installation on SCU ports may fail under RSTe RAID mode	8
3. UEFI Operating System installation is not supported on ESRT2 mode	8
4. HDD status LEDs do not function under specific configuration	9
5. RSTe GUI installation may fail if there are no devices attached to any onboard AHCI ports	9
6. System may halt under specific BIOS configurations	9
7. Microsoft Windows 2003* x86 installation failure under Pass-through mode of SCU controller	9
8. System may halt under unsupported configuration in ESRT2 mode	10
9. Integrated BMC Web Console – Power Statistics page – Minimum wattage reads as zero.	10
10. Integrated BMC Web Console – Power Control page – Perform Action button not functional.	10
11. IPMI Get Chassis Status command returns incorrect Chassis Identify State.	11
12. The BIOS and ME Firmware can't be updated successfully using Intel® One Boot Flash Update Utility (OFU) under SuSE* Linux Enterprise Server 11 (64-bit) with SP2	11
13. BMC continuously sends HDD assert/de-assert event during HDD RAID rebuild under ESRT2 mode of the SCU controller	11
14. High CPU utilization may occur when installing or running Microsoft Windows Server 2008* R2 or Microsoft Windows* 7 with default NIC driver for Intel® Gigabit ET Dual Port Server Adapter E1G42ET and Intel® Gigabit ET Quad Port Server Adapter E1G44ET	12
15. Intel® LAN driver installation failure on Microsoft Windows* 7	12
16. Hard drives connected through SAS expander can’t be detected in legacy mode	12
17. On-board VGA cannot be set to the highest resolution (1920x1080 and higher)	13
18. Hard drive locate LED may not instantly respond to the locate command if backplane is connected through SAS expander to a RAID controller	13
19. Some log names in SEL are displayed incorrectly after pressing the power button to shut down Microsoft Windows 2008* R2 64bit	13
20. Fault LED on 4x3.5” hot swap HDD cage may not function normally during RAID rebuilding with AHCI ESRTII RAID configuration	14
21. Integrated BMC Web Console – Sensor Readings Page – Memory Throttling sensor status will stay “Critical” once triggered	14
22. WOL (Wake on LAN) may not function under Red Hat* Linux 6.2 64bit OS	14

Match case Limit results 1 per page

Monthly Specification Update

Intel

Server Board S1400FP Family

Intel

Server System P4000FP Family

July, 2012

Enterprise Platforms and Services Marketing