Intel S3000AH User Guide
Intel S3000AH - Entry Server Board Motherboard Manual
 |
UPC - 735858185806
View all Intel S3000AH manuals
Add to My Manuals
Save this manual to your list of manuals |
Intel S3000AH manual content summary:
- Intel S3000AH | User Guide - Page 1
Intel® Server Board S3000AH User's Guide A Guide for Technically Qualified Assemblers of Intel® Identified Subassemblies/ Products Intel Order Number D56209-003 - Intel S3000AH | User Guide - Page 2
Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. * Other names and brands may be claimed as the property of others. Copyright © 2006, Intel Corporation. All Rights Reserved ii Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 3
in this document before performing any of the instructions. See also Intel Server Boards and Server Chassis Safety Information on the Intel® Server Deployment Toolkit 2.0 CD and/or at http://support.intel.com/support/ motherboards/server/sb/cs-010770.htm. Wichtige Sicherheitshinweise Lesen Sie - Intel S3000AH | User Guide - Page 4
http://support.intel.com/support/motherboards/server/sb/CS-010770.htm 上的 Intel Server Boards and Server Chassis Safety Information（《Intel iv Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 5
damage the contacts inside the jumper, causing intermittent problems with the function controlled by that jumper. Take care to grip with, but not squeeze, the pliers or other tool you use to remove a jumper, or you may bend or break the pins on the board. Intel® Server Board S3000AH User's Guide v - Intel S3000AH | User Guide - Page 6
vi Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 7
, troubleshooting information, and instructions on how to add and replace components on the Title of document. For the latest version of this manual, see http://support.intel.com/ support/motherboards/server/S3000AH/. Manual Organization Chapter 1 provides a brief overview of the Intel® Server Board - Intel S3000AH | User Guide - Page 8
, RAID controller, operating system. For information about which accessories, memory, processors, and third-party hardware have been tested and can be used with your board, and for ordering information for Intel products, see http://support.intel.com/support/motherboards/server/S3000AH/ compat.htm - Intel S3000AH | User Guide - Page 9
software to manage your Intel® server For drivers For firmware and BIOS updates, or for BIOS recovery For diagnostics test software Tested HardwareOperating Systems List Reference Chassis List Supported Processors Tested Memory List Power Budget Tool Intel® System Management Software Driver (for an - Intel S3000AH | User Guide - Page 10
x Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 11
1: Server Board Features 1 RAID Support ...4 SATA Server Board ...4 Intel® Embedded Server RAID Technology 5 Intel® Matrix Storage Manager 5 Connector and Component Locations 6 Configuration Jumpers ...12 Back Panel Connectors ...13 Hardware Requirements ...14 Processor ...14 Memory ...14 - Intel S3000AH | User Guide - Page 12
with Network 48 System Boots when Installing PCI Card 49 Problems with Newly Installed Application Software 49 Problems with Application Software that Ran Correctly Earlier 50 Devices are not Recognized under Device Manager (Windows* Operating System) . 50 xii Intel® Server Board S3000AH User - Intel S3000AH | User Guide - Page 13
Hard Drive(s) are not Recognized 50 Bootable CD-ROM Disk Is Not Detected 51 LED Information ...51 BIOS POST Beep Codes 52 Appendix D: Intel® Server Issue Report Form 53 Intel® Server Board S3000AH User's Guide xiii - Intel S3000AH | User Guide - Page 14
xiv Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 15
viii Table 2. Server Board Features 2 Table 3. NIC LED Descriptions 13 Table 4. Setup Menu Key Use 18 Table 5. Product Certification Markings 38 Table 6. Resetting the System 43 Table 7. LED Information ...51 Table 8. POST Error Beep Codes 52 Intel® Server Board S3000AH User's Guide xv - Intel S3000AH | User Guide - Page 16
xvi Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 17
Intel® Server Board S3000AH (S3000AHLX shown 1 Figure 2. Configuring SATA as RAID in BIOS Setup 4 Figure 3. S3000AHLX Connector and Component Locations 7 Figure 4. S3000AH Connector and Component Locations 9 Figure 5. S3000AHV Connector and Component Locations 11 Figure 6. Configuration Jumper - Intel S3000AH | User Guide - Page 18
xviii Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 19
the main features of the Intel® Server Board S3000AH. This chapter provides a photograph of the product, a list of the server board features, and diagrams showing the location of important components and connections on the server board. Figure 1. Intel® Server Board S3000AH (S3000AHLX shown) - Intel S3000AH | User Guide - Page 20
RAID 0/1/10 support for Intel® Embedded Server RAID Technology and RAID 0/1/5/10 for Intel® Matrix Storage Technology • One ATA-100 connector • ATX-compliant 24-pin control panel header SMSC* SCH5027 controller On-board ATI* ES1000 video controller with 16MB external video memory • ATA-100 support - Intel S3000AH | User Guide - Page 21
/33MHz, 3.3V Universal PCI connectors • One x8 PCI Express* connector • One physical x8 PCI Express* connector (operating at x4 lane speed) Fans System Management Support for up to four system fans and one processor fan Intel® System Management Software Intel® Server Board S3000AH User's Guide 3 - Intel S3000AH | User Guide - Page 22
on configuring RAID, see the RAID Software Guide that is included on the Intel® Server Deployment Toolkit 2.0 CD. SATA Server Board The Intel® Server Board S3000AH provides an embedded SATA controller that supports both 1.5 and 3.0 Gbps data transfer rates. The BIOS Setup utility provides - Intel S3000AH | User Guide - Page 23
the Intel® Server Board S3000AH Technical Product Specification. For information on setting up RAID, see the RAID Software Guide that is included on the Intel® Server Deployment Toolkit 2.0 CD. Intel® Matrix Storage Technology supports software SATA RAID 0, 1, 10, and 5. • Microsoft Windows* driver - Intel S3000AH | User Guide - Page 24
Connector and Component Locations A B C D E F GH I J KL PP OO NN MM LL KK JJ II HH GG FF DD BB Z EE CC AA YX W VU T S M N O P RQ AF000537 6 Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 25
2A) T. System Front Processor Blower Header W. Battery Z. Floppy Connector CC. SMSC* SCH5027 Super I/O FF. Front Panel Connector II. Clear CMOS Jumper LL. External USB Connector OO. Intel® 6702 PXH-V Controller C. ATI* ES1000 Video Controller F. PCI-X* 64/133 Slot 5 I. Intel® Adaptive Slot, Slot - Intel S3000AH | User Guide - Page 26
A B C D EF GH I J K NN MM LL KK JJ II HH GG FF EE CC AA Y DD BB Z XW V UT S R L M N O QP AF000538 8 Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 27
Rear System Fan O. Processor Fan R. System Front DIMM Blower Header U. Intel® S3000 MCH X. Front System Fan AA. SATA Port 3 DD. Intel® 82801 ICH7R GG. SATA Port 1 JJ. BIOS SPI Flash MM. SMBus Connector Figure 4. S3000AH Connector and Component Locations Intel® Server Board S3000AH User's Guide 9 - Intel S3000AH | User Guide - Page 28
A B C D E FG H I LL KK JJ II HH GG FF EE DD CC AA Y W BB Z X VU T SR Q P J K L M ON AF000539 10 Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 29
Processor Socket O. DIMM Sockets (1B and 1A) R. Chassis Intrusion Header U. 2x12 Main Power Connector X. PATA IDE Connector AA. SATA Port 2 DD. System Maintenance Mode Jumper GG. SATA Port 0 JJ. SPI/FWH Select Header Figure 5. S3000AHV Connector and Component Locations Intel® Server Board S3000AH - Intel S3000AH | User Guide - Page 30
will POST normally. Jumper in maintenance mode (pins 2-3) allows Intel® AMT setting/ password reset. Jumper removed is used to recover from a corrupted BIOS. Bootable media with a valid BIOS ROM required. Figure 6. Configuration Jumper Descriptions 12 Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 31
LED State Off Solid Green Blinking Green N/A Solid Green Solid Yellow Description No network connection Network connection in place Transmit/receive activity 10 Mbps connection (if left LED is on or blinking) 100 Mbps connection 1000 Mbps connection Intel® Server Board S3000AH User's Guide 13 - Intel S3000AH | User Guide - Page 32
. For a complete list of supported memory DIMMs, see the links under "Additional Information and Software." Power Supply A minimum of 350 Watts is required. Your supply must provide a minimum of 2A of 5V standby current or the board will not boot. 14 Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 33
supports one or two ATA-100 devices. IDE devices can be connected to the standard IDE connector located near the SATA ports. See the documentation included with your server chassis for additional drive information and drive installation instructions. Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 34
16 Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 35
to the Intel® S3000 Server Board Family Datasheet where you will find details about specific BIOS setup screens. Starting Setup You can enter and start BIOS Setup under several conditions: • When you turn on the server, after POST completes the memory test. • When you have moved the CMOS jumper on - Intel S3000AH | User Guide - Page 36
"Setup Menu Key Use" describes the keyboard commands you can use in the BIOS Setup menus. Table 4. Setup Menu Key Use Key to Press Description Left and right arrows Up they were before was pressed without affecting any existing field values. 18 Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 37
Boot the computer and press when you see the message: Press Key if you want to run SETUP 2. Write down the current settings in the BIOS Setup program. Note: Do not skip step 2. You will need these settings to configure your computer at the end of the procedure. Intel® Server Board S3000AH - Intel S3000AH | User Guide - Page 38
completed. Note: You may encounter a CMOS Checksum error or other problem after reboot. If this happens, shut down the system and boot it again. CMOS checksum errors require that you enter Setup, check your settings, save your settings, and exit Setup. 20 Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 39
. 5. When the system begins beeping, power it down and disconnect the AC power. 6. Return the CMOS Clear jumper to the CMOS Clear by BMC location, covering pins 1 and 2. 7. Close the server chassis. 8. Reconnect the AC power and power up the system. Intel® Server Board S3000AH User's Guide 21 - Intel S3000AH | User Guide - Page 40
22 Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 41
at the beginning of this manual. Tools and Supplies Needed • Phillips* (cross head) screwdriver (#1 bit and #2 bit) • Needle nosed pliers • Antistatic wrist strap and conductive foam pad (recommended) Installing and Removing Memory The silkscreen on the board for the DIMMs displays DIMM 1A, DIMM 1B - Intel S3000AH | User Guide - Page 42
Socket DIMM 2A Socket Figure 9. Installing Memory DIMM 2B Socket DIMM 1B Socket Replace the server's cover and reconnect the AC power cord. See the documentation that came with your server chassis for instructions on installing the server's cover. 24 "Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 43
doing the following: (1) Touch the metal chassis before touching the processor or server board. Keep part of your body in contact with the metal chassis to dissipate the static charge while handling the processor. (2) Avoid moving around unnecessarily. "Intel® Server Board S3000AH User's Guide" 25 - Intel S3000AH | User Guide - Page 44
with your finger tip to bring the front end of the load plate up slightly. Open the load plate as shown (see Figure 11). A B Figure 11. Open the Load Plate AF000529 Note: Do not touch the socket pins; they are very sensitive and easily damaged. 26 "Intel® Server Board S3000AH User's Guide" - Intel S3000AH | User Guide - Page 45
(see Figure 14). A B AF000530 Figure 14. Removing the Protective Socket Cover 10. Lower the CPU load plate and lower the socket lever completely. Note: Retain the protective socket cover for use when removing a processor that will not be replaced. "Intel® Server Board S3000AH User's Guide" 27 - Intel S3000AH | User Guide - Page 46
reconnect any parts you removed or disconnected to reach the processor sockets. 5. Replace the server's cover and reconnect the AC power cord. See the documentation that came with your server chassis for instructions on installing the server's cover. 28 "Intel® Server Board S3000AH User's Guide" - Intel S3000AH | User Guide - Page 47
lever. 10. Raise the CPU load plate. 11. Remove the processor. 12. If installing a replacement processor, see "Installing the Processor". Otherwise, install the protective socket cover over the empty processor socket and reinstall the chassis cover. "Intel® Server Board S3000AH User's Guide" 29 - Intel S3000AH | User Guide - Page 48
server settings stored in CMOS RAM in the RTC (for example, the date and time) may be wrong. Contact your customer service representative or dealer for a list of approved devices. Warning: Danger of explosion if battery is incorrectly replaced. Replace 30 "Intel® Server Board S3000AH User's Guide" - Intel S3000AH | User Guide - Page 49
according to local ordinance. 8. Remove the new lithium battery from its package, and, being careful to observe the correct polarity, insert it in the battery socket. 9. Close the chassis. 10. Run Setup to restore the configuration settings to the RTC. "Intel® Server Board S3000AH User's Guide" 31 - Intel S3000AH | User Guide - Page 50
32 "Intel® Server Board S3000AH User's Guide" - Intel S3000AH | User Guide - Page 51
Wide Web http://support.intel.com/support/motherboards/server/S3000AH. Telephone All calls are billed per incident, levied in local currency at the applicable credit card exchange rate plus applicable taxes. (Intel reserves the right to change the pricing for telephone support at any time without - Intel S3000AH | User Guide - Page 52
Hong Kong 852 2 844 4456 India........... 0006517 2 68303634 (manual toll-free. You need an IDD-equipped telephone) Indonesia ... 800 80 1390 Myanmar... 63 2 636 9796 (via Philippines) New Zealand 0800 444 365 Pakistan..... 632 63684 15 (IDD via Philippines Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 53
0114 Peru 001 916 377 0114 Uruguay..... 001 916 377 0114 Venezuela... Contact AT&T USA at 0 800 2255 288. Once connected, dial 800 843 4481 Intel® Server Board S3000AH User's Guide 35 - Intel S3000AH | User Guide - Page 54
36 Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 55
to Class A Limits. The Intel® Server Board S3000AH has been has been tested and verified to comply with the following electromagnetic compatibility (EMC) regulations when installed a compatible Intel® host system. For information on compatible host system(s) see Intel's Server Builder Web site or - Intel S3000AH | User Guide - Page 56
A Attestation (USA/Canada) • C-Tick Declaration of Conformity (Australia) • MED Declaration of Conformity (New Zealand) • BSMI Certification (Taiwan) • GOST - Listed on one System License (Russia) • Canada 38 CANADA ICES-003 CLASS A CANADA NMB-003 CLASSE A Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 57
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that a circuit other than the one to which the receiver is connected. Intel® Server Board S3000AH User's Guide 39 - Intel S3000AH | User Guide - Page 58
its compliance. Taiwan Declaration of Conformity (BSMI) The BSMI Certification Marking and EMC warning is located on the outside rear area of the product. 40 Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 59
Date of Manufacturer: Refer to date code on product 5. Manufacturer/Nation: Intel Corporation/Refer to country of origin marked on product CNCA (CCC-China) The CCC Certification Marking and EMC warning is located on the outside rear area of the product. Intel® Server Board S3000AH User's Guide 41 - Intel S3000AH | User Guide - Page 60
Restriction of Hazardous Substances (RoHS) Compliance Intel has a system in place to restrict the use of banned substances in accordance with the European retailer or distributor of this product for information about product recycling and / or take-back. 42 Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 61
and Software" for a link to the software updates. In addition to the server firmware and files, also update any drivers used for components you have installed in your system, such as video drivers, network drivers, and SCSI drivers. Intel provides a package called the "Platform Confidence Test - Intel S3000AH | User Guide - Page 62
the peripheral devices. 1. Turn off the system and all external peripheral devices. Disconnect each device from the system, except for the keyboard and the video monitor. 2. Make sure the system power cord is plugged into a properly grounded AC outlet. 44 Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 63
fans do not rotate. • Diskette drive activity light does not light. • Hard disk drive activity light does not light. • CD-ROM drive activity light does not light. • There are problems with application software. • The bootable CD-ROM is not detected. Intel® Server Board S3000AH User's Guide 45 - Intel S3000AH | User Guide - Page 64
video controller enabled in the BIOS? • Remove all add-in cards and see if the video returns. If successful, add the cards back in one at a time with a reboot between each addition. • Make sure the memory DIMMs comply with the system requirements. 46 Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 65
control panel LEDs lit? • Have any of the fan motors stopped? Use the server management subsystem to check the fan status. • Have your fans speeded up in response to an overheating situation? • Have your fans speeded up in response to a fan that has failed? Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 66
may require interrupts that are not shared with other PCI drivers. For these drivers, it may be necessary to alter settings so that interrupts are not shared. See the documentation that came with your PCI card(s) for information on changing interrupts. 48 Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 67
to boot. Before installing a PCI card, you should always: • Turn off the server power by using the power button on the front of the system. • Unplug the AC power cord(s) from the server. Problems with Newly Installed Application Software Problems that occur when you run new application software - Intel S3000AH | User Guide - Page 68
" for a link to the current drivers and chipset files. Hard Drive(s) are not Recognized Check the following: • Make sure the drive is not disabled in BIOS Setup. • Make sure the drive is connected correctly and that is plugged into the power supply. 50 Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 69
sure the RAID card is installed correctly. Bootable CD-ROM Disk Is Not Detected Check the following: • Make sure the BIOS is configured to allow the CD-ROM to be the first bootable device. LED Information The Intel® Server Board S3000AH includes LEDs that can aid in troubleshooting your system - Intel S3000AH | User Guide - Page 70
insert the cards one at a time, booting the system between each card addition, until the beeps again occur to reveal the malfunctioning card. Replace or reseat the system video add-in card. If on-board video is bing used, the server board may be faulty. 52 Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 71
is available at http:// support.intel.com/support/motherboards/server/S3000AH/. For the fastest service, please submit your form via the Internet. Date Submitted Company Name Contact Name Email Address Intel Server Product Priority (Critical, Hot, High, Low Brief Problem Description. Provide - Intel S3000AH | User Guide - Page 72
NIC Peripheral PCI 32/33 PCI Slot 1 PCI Slot 2 PCIe* x4 PCI Slot 3 PCIe* x8 PCI Slot 4 PCI-X* 64/100 PCI Slot 5 Intel® Adaptive Slot/PCIe* x8 PCI Slot 6 Video On-board Video Add-in Video Description Driver Revision IRQ I/O Base FW Address Revision 54 Intel® Server Board S3000AH User's Guide - Intel S3000AH | User Guide - Page 73
SAS, etc) Make/Model Driver Revision IRQ I/O Base FW Address Revision Hot-swap or Fixed IRQ FW Revision Management Information On-Board Platform Instrumentation only Intel® System Management Control Panel Information Standard Control Panel Intel® Server Board S3000AH User's Guide 55 - Intel S3000AH | User Guide - Page 74
Complete Problem Description In the space below, provide a complete description of the steps used to reproduce the problem or a complete description of where the problem can be found. Please also include any details on troubleshooting already done 56 Intel® Server Board S3000AH User's Guide
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
 |
 |
Intel
®
Server Board S3000AH
User’s Guide
A Guide for Technically Qualified Assemblers of Intel® Identified Subassemblies/
Products
Intel Order Number D56209-003