Intel SC5299-E User Guide

Intel SC5299-E Manual

Get Intel SC5299-E PDF manuals and user guides View all Intel SC5299-E manuals
Add to My Manuals
Save this manual to your list of manuals

Intel SC5299-E manual content summary:

  • Intel SC5299-E | User Guide - Page 1
    Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide A Guide for Technically Qualified Assemblers of Intel® Identified Subassemblies/Products Intel Order Number D37596-004
  • Intel SC5299-E | User Guide - Page 2
    registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. * Other names and brands may be claimed as the property of others. Copyright © 2006-2010, Intel Corporation. All Rights Reserved ii Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 3
    de realizar cualquiera de las instrucciones. Vea Intel Server Boards and Server Chassis Safety Information en el Intel® Server Deployment Toolkit CD y/o en http://support.intel.com/ support/motherboards/server/sb/cs-010770.htm Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide iii
  • Intel SC5299-E | User Guide - Page 4
    the jumper, causing intermittent problems with the function controlled by that jumper. Take care to grip with, but not squeeze, the pliers or other tool you use to remove a jumper, or you may bend or break the pins on the board. iv Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 5
    you may need, troubleshooting information, and instructions on how to add and replace components on the Intel® Entry Server Chassis SC5299-E. For the latest version of this manual, see http:/ /support.intel.com/support/motherboards/server/chassis/sc5299-e/. Manual Organization Chapter 1 provides
  • Intel SC5299-E | User Guide - Page 6
    you just received this product and need to install it Use this Document or Software Intel® Entry Server Chassis SC5299-E Technical Product Specification Intel® Entry Server Chassis SC5299-E Quick Start User's Guide in the product box vi Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 7
    To make sure your system falls within the allowed power budget For software to manage your Intel® server Power Budget Tool at http://support.intel.com/support/motherboards/server/chassis/ sc5299-e Intel® System Management Software Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide vii
  • Intel SC5299-E | User Guide - Page 8
    Preface viii Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 9
    Installing the Processor Air Duct 19 Removing the Processor Air Duct 19 Installing the Processor Air Duct 20 Installing or Removing a Server Board 20 Installing and Removing a Fixed Hard Drive 26 Installing a Fixed Hard Drive 26 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide ix
  • Intel SC5299-E | User Guide - Page 10
    97 Server Safety Information 97 Safety Warnings and Cautions 97 Intended Application Uses 98 Site Selection ...98 Equipment Handling Practices 98 Power and Electrical Warnings 98 System Access Warnings 99 Rack Mount Warnings 100 x Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 11
    111 Avertissements sur le montage en rack 112 Décharges électrostatiques (ESD 112 tica (ESD 118 B. Installation/Assembly Safety Instructions 125 English ...125 Deutsch ...127 Franç Intel® Server Issue Report Form 141 E. Warranty ...145 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 12
    Intel® Chassis Subassembly Products 145 Extent of Limited Warranty 145 Warranty Limitations and Exclusions 146 Limitations of Liability 146 How to Obtain Warranty Service 146 Telephone Support End of Life / Product Recycling 155 xii Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 13
    . Preparing Fixed Hard Drive for Removal 34 Figure 37. Removing Fixed Hard Drive from Drive Bay 34 Figure 38. Re-installing Drive Cage EMI Shield 34 Figure 39. Removing 5.25-in Drive EMI Shield (DP/WS/BRP configuration shown 35 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide xiii
  • Intel SC5299-E | User Guide - Page 14
    Hot Swap Drive Cage 64 Figure 81. Attaching Filler Panel to Hot Swap Drive Cage 65 Figure 82. Removing Thumb Screws from Backplane 65 Figure 83. Attaching Fan Bracket to Hot Swap Drive Cage (SAS/SATA drive cage illustrated).. 66 xiv Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 15
    Rack Rail from Rack Rail Assembly 88 Figure 114. Attaching Inner Rack Rails to Chassis (DP/WS/BRP configuration shown) ......... 89 Figure 115. Attaching Outer Rack Rails to Rack Uprights 90 Figure 116. Installing Chassis into Rack 91 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 16
    xvi Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 17
    Power Supply Output Capability 94 Table 6. 670-W Power Supply Output Capability 94 Table 7. 650-W Power Supply Output Capability 95 Table 8. System Environmental Specifications 95 Table 9. Product Regulatory Compliance Markings 151 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 18
    xviii Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 19
    Intel® Server Boards S5000VSA, S5000XSL, S5000PSL and S3000AH 1. The Intel® Entry Server Chassis SC5299-E can be configured as a rack-mountable server chassis when outfitted with the optional Rack Mount Kit (order code APP3RACKIT). Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 20
    accessory to create a 1+1 configuration. • One 120-mm system fan • One power supply fan1 • Processor fans for active thermal solution • Fan with optional hot swap drive kit upgrade • Fixed hard drive fan with WS chassis configuration 2 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 21
    supply module. Component Identification Front View Components A B C D E TP02345 A. 5.25-in Device Drive Bays B. Front Panel C. Drive Bay Access Door D. Door Lock E. Front Panel USB Ports Figure 2. Front View Components (with Front Bezel Assembly) Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP
  • Intel SC5299-E | User Guide - Page 22
    Chassis Features A B C D E TP00882 A. 5.25-in Device Drive Bays B. 3.5-in Device Drive Bay C. Hard Drive Cage D. Drive Bay EMI Shield (shown open) E. Front Panel USB Ports Figure 3. Front View Components (without Front Bezel Assembly) 4 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 23
    Card Guide G. Front Panel USB Ports H. Fixed Hard Drive Cage I. Large Processor Air Duct J. Rear Tool-less PCI Retention Mechanisms K. Fan Duct / System Fan Assembly L. Power Supply Figure 4. Internal Components (DP/WS/BRP Configuration) Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 24
    Bay EMI Shield E. Drive Cage Retention Mechanism F. PCI Add-in Card Guide G. Front Panel USB Ports H. Fixed Hard Drive Cage I. Rear Tool-less PCI Retention Mechanisms J. System Fan K. Power Supply Figure 5. Internal Components (UP Configuration) 6 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP
  • Intel SC5299-E | User Guide - Page 25
    server board documentation for port identification F. Alternate Serial B port knockout G. PCI Add-in Card slots H. PCI Tool-less Card Retention Mechanisms I. External SCSI knockout J. Serial B port knockout Figure 6. Back Panel Components Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 26
    indicates a power fault, fan fault, or a non-critical temperature or voltage fault. No light indicates a fatal error during POST. NOTES: 1. LED status may vary depending on server board integrated. Figure 7. Front Panel Components 8 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 27
    hot-swappable SCSI, SATA or SAS hard drives) may be purchased to replace the fixed hard drive cage. See Table 3 for order code information. For instructions on installing hard drives, see "Installing and Removing a Fixed Hard Drive". Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 9
  • Intel SC5299-E | User Guide - Page 28
    Systems Your Intel® Entry Server Chassis SC5299-E can be optionally mounted into a rack. Instructions for installing your chassis into a rack are included with the rail kit. The order number for the rack mounting kit is APP3RACKIT. 10 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 29
    Table 3. Accessories and Order Codes Accessory Order Code SAS/SATA Hot Swap Drive Bay Upgrade Kit SCSI Hot Swap Drive Bay Upgrade Kit Hot Swap Conversion Kit Rack Mount Kit AXX6SASDB AXX6SCSIDB APP3HSDBKIT APP3RACKIT Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 11
  • Intel SC5299-E | User Guide - Page 30
    Server Chassis Features 12 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 31
    be needed to prevent the chassis from sliding on your work surface. 1. Observe the safety and ESD precautions listed in Appendix A, "Safety Information". 2. Turn off all peripheral devices connected to the server. Turn off the server. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 13
  • Intel SC5299-E | User Guide - Page 32
    to ensure proper cooling. 1. Slide the left side cover on the chassis and latch securely (see letter "A" in the following figure). 2. (Optional) Replace screws (see letter "B"). B A B TP00831 Figure 11. Installing Left Side Cover 14 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 33
    Assembly". 5. Remove the two screws (see letter "A" in the following figure") securing the right side cover to the chassis. Lift the right side cover off the chassis. A A TP01736 Figure 12. Removing Right Side Cover from Chassis Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 15
  • Intel SC5299-E | User Guide - Page 34
    . For instructions, see "Installing the Front Bezel Assembly". 3. Reinstall the left side cover. For instructions, see "Installing the Left Side Cover" 4. Reconnect all peripheral devices and the AC power cable. Power up the server. 16 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 35
    see letter "B"). Disengage the three clips that attach the right side of the front bezel assembly to the chassis and remove (see letter "C"). C A C C A B TP02034 Figure 14. Removing Front Bezel Assembly (DP/WS/BRP configuration shown) Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 17
  • Intel SC5299-E | User Guide - Page 36
    the Front Bezel Assembly (DP/WS/BRP configuration shown) 2. Reinstall the left side cover. For instructions, see "Installing the Left Side Cover". 3. Reconnect all peripheral devices and the AC power cable. Power up the server. 18 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 37
    instructions, see "Removing the Left Side Cover". 4. Loosen the two mounting screws and remove the processor air duct. TP01136 Figure 16. Removing Processor Air Duct 5. Save the screws. You will need them to re-install the processor air duct. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User
  • Intel SC5299-E | User Guide - Page 38
    , see Table 1, "Breakdown of Intel® Entry Server Chassis SC5299-E Configurations". To install or remove a server board, do the following: 1. Observe the safety and ESD precautions listed in Appendix A, "Safety Information". 20 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 39
    (DP/WS/BRP configuration shown) 6. Disconnect cables from any installed fixed hard drives. If necessary, remove hard drives from fixed hard drive cage. For instructions on removing fixed hard drives, see "Removing a Fixed Hard Drive". Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 40
    in boards that are present. 9. Remove the PCI card guide by pressing in on the blue tabs (see letter "A" in the following figure) and pulling the PCI card guide outward (see letter "B"). A B TP01732 Figure 20. Removing PCI Card Guide 22 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 41
    PCI card guide into slots in chassis (see letter "A" in the following figure). Swing PCI card guide into chassis until right-side blue tabs snap into place (see letter "B"). A B TP01735 Figure 21. Re-installing PCI Card Guide into Chassis Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 42
    Figure 22. Inserting Fixed Hard Drive Cage into Chassis (DP/WS/BRP configuration only) 15. If previously removed, install fixed hard drives and connect power and data cables. For instructions, see "Installing a Fixed Hard Drive". 24 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 43
    and Installing the Front Bezel Assembly" 18. Re-install the left side cover. For instructions, see "Installing the Left Side Cover" 19. Plug all peripheral devices and the AC power cable(s) back into the server. Power up the server. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 25
  • Intel SC5299-E | User Guide - Page 44
    : SAS/SATA drives illustrated. Figure 24. Drive Bay Slot Order 1. Observe the safety and ESD precautions listed in Appendix A, "Safety Information". 2. Power down the server and unplug all peripheral devices and the AC power cable. 26 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 45
    the following figure). A B TP01869 Figure 25. Removing Drive Cage EMI Shield from Chassis (DP/WS/BRP configuration shown) 6. Remove any PCI add-in boards that use the PCI card guide. For instructions, see "Removing PCI Add-in Boards". Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 27
  • Intel SC5299-E | User Guide - Page 46
    . Removing PCI Card Guide 8. Route the required power cables (connectors P8-P13) from behind the PCI card guide through the cable routing area at the bottom of the fixed drive cage. AF000317 Figure 27. Routing Hard Drive Power Cables 28 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 47
    28. Unlatching Drive Latch 10. Insert fixed hard drive into drive bay and push until it stops. Ensure that the power and data connector end of the hard drive is facing forward AF000319 Figure 29. Inserting Hard Drive into Drive Cage Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 29
  • Intel SC5299-E | User Guide - Page 48
    Latch 12. Install additional drives as necessary. Warning: Drive bay slots 1, 3, and 5 MUST be populated first. Failure to do so could result in thermal issues within the chassis. 1 2 3 4 5 6 AF000316 Figure 31. Drive Bay Slot Order 30 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 49
    at the bottom of the fixed drive cage. AB AF000429 Figure 32. Cabling a Fixed Hard Drive 14. Re-attach the drive cage EMI shield to the chassis and tighten the thumb screw. AF000315 Figure 33. Re-installing Drive Cage EMI Shield Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 31
  • Intel SC5299-E | User Guide - Page 50
    devices and the AC power cable. 3. Remove the left side cover. For instructions, see "Removing the Left Side Cover". 4. Remove the front bezel assembly. For instructions, see "Removing and Installing the Front Bezel Assembly". 32 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 51
    and power cables from the hard drive to be removed (see letter "A" in the following figure). Pull the drive latch forward (see letter "B") to unlatch the drive locking mechanism for the hard drive you want to remove. B A AF000430 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 33
  • Intel SC5299-E | User Guide - Page 52
    Hard Drive" for instructions. AF000431 Figure 37. Removing Fixed Hard Drive from Drive Bay 8. Re-attach the drive cage EMI shield to the chassis and tighten the thumb screw. AF000315 Figure 38. Re-installing Drive Cage EMI Shield 34 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 53
    the EMI shield from the 5.25-in device drive bay (see letter "A" in the following figure). Move latch to the "unlock" position (see letter "B"). B A TP01063 Figure 39. Removing 5.25-in Drive EMI Shield (DP/WS/BRP configuration shown) Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 35
  • Intel SC5299-E | User Guide - Page 54
    power supply) and data cables to the rear of the CD-ROM or DVD-ROM drive (see letter "F"). D F E C TP01064 Figure 40. Installing CD-ROM or DVD-ROM Drive (DP/WS/BRP configuration shown) 7. If necessary, remove the filler panel from the front bezel assembly. TP01723 36 Intel® Entry Server Chassis
  • Intel SC5299-E | User Guide - Page 55
    Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the chassis cover. For instructions, Bay (see letter "C"). A B C TP02047 Figure 41. Removing CD-ROM or DVD-ROM Drive (DP/WS/BRP configuration shown) Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 56
    DVD-ROM drive, see "Installing a DVD-ROM or CD-ROM Drive" for instructions. If not replacing the drive, reinstall the EMI shield and front bezel filler Power down the server and unplug all peripheral devices and the AC power cable. 38 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 57
    the type and serial number of the add-in board in your equipment log. Set jumpers or switches on the board according to the manufacturer's instructions. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 39
  • Intel SC5299-E | User Guide - Page 58
    and ESD precautions listed in Appendix A, "Safety Information". 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the left side cover. For instructions, see "Removing the Left Side Cover". 40 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 59
    (see letter "A" in the following figure). Place the removed add-in board in an anti-static protective wrapper. Close the back panel PCI Add-in Card Retention Device (see letter "B"). BB A TP01724 Figure 47. Removing PCI Add-in Board Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 41
  • Intel SC5299-E | User Guide - Page 60
    devices and the AC power cable. 3. Remove the left side cover. For instructions, see "Removing the Left Side Cover" 4. Remove the front bezel assembly if it is installed. For instructions, see "Removing the Front Bezel Assembly". 42 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 61
    right side cover off the chassis. A A TP01736 Figure 49. Removing Right Side Cover from Chassis 6. Remove the three screws securing the front panel board to the chassis. TP01737 Figure 50. Unattaching Front Panel Board from Chassis Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 43
  • Intel SC5299-E | User Guide - Page 62
    letter "C") from the front panel board. A B C AF000432 Figure 51. Removing Front Panel Board from Chassis 8. Remove standoffs from old front panel and install on new front panel. TP02000 Figure 52. Removing Standoffs from Front Panel 44 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 63
    to align the front panel board in position inside the chassis. With your other hand, tighten the three screws to secure the front panel board to the front of the chassis. TP01740 Figure 54. Positioning Front Panel Board in Chassis Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 45
  • Intel SC5299-E | User Guide - Page 64
    and ESD precautions listed in Appendix A, "Safety Information". 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the left side cover. For instructions, see "Removing the Left Side Cover". 46 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 65
    server board (see letter "A" in the following figure). Remove the system fan from its snap-in bracket by pressing the two bracket tabs outward (see letter "B"). B A TP00884 Figure 57. Removing System Fan from Chassis (UP Configuration) Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 66
    fan assembly. TP01853 Figure 59. Re-installing Fan Duct / System Fan Assembly (DP/WS/BRP configuration) 8. Reconnect the fan cable to the server board. Refer to the User Guide that came with your server board for connection location. 48 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 67
    all internal power cables from chassis components and server board. 5. Rotate the blue locking mechanism (see letter "A" in the following figure to the open position. A TP01757 Figure 60. Unlocking Fixed Power Supply from Chassis Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 49
  • Intel SC5299-E | User Guide - Page 68
    in the open position. Make sure that the new fixed power supply rests on the small metal shelf on the side wall of the chassis (see letter "A" in the following figure). A Figure 62. Inserting Fixed Power Supply in Chassis TP01753 50 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 69
    on server board, re-install secondary side cover. 13. Install the left side cover. For instructions, see "Installing the Left Side Cover". 14. Reconnect all peripheral devices and the AC power cable to the server. Power up the server. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 70
    filler panel from chassis. . UP UP TP00916 Figure 64. Removing Power Supply Filler Panel 3. Insert new hot swap power supply module until it clicks into place. TP00917 Figure 65. Inserting Additional Hot Swap Power Supply Module 52 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 71
    Figure 66. Removing Hot Swap Power Supply Module from Chassis 4. Insert new hot swap power supply module. TP00854 Figure 67. Inserting Hot Swap Power Supply Module in Chassis 5. Connect power cable to replaced hot swap power supply. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 53
  • Intel SC5299-E | User Guide - Page 72
    TP01765 Figure 68. Removing Hot Swap Power Supply Module 5. Remove second (redundant) hot swap power supply module (or filler panel), if one is present. 6. Disconnect all internal power cables from chassis components and server board. 54 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 73
    of the chassis. Note: You may have to work the power cables through slot sopenings with your free hand as you remove the power supply cage from the chassis. TP01762 Figure 70. Detaching Hot Swap Power Supply Cage from Rear of Chassis Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 55
  • Intel SC5299-E | User Guide - Page 74
    Bracket from Hot Swap Power Supply Cage 10. Attach the rear support bracket to the new power supply cage with the two screws removed from the previous step. TP01763 Figure 72. Attaching Rear Support Bracket to Power Supply Cage 56 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 75
    cage. TP01766 Figure 73. Securing Hot Swap Power Supply Cage to Rear of Chassis 12. Secure inside panel of hot swap power supply cage to chassis with two screws. TP01767 Figure 74. Securing Hot Swap Power Supply Cage to Inside of Chassis Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 76
    Re-installing Hot Swap Power Supply Module(s) 18. Install the left side cover. For instructions, see "Installing the Left Side Cover". 19. Reconnect all peripheral devices and the AC power cable(s) to the server. Power up the server. 58 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 77
    letter "B"). Repeat process for remaining feet. A B TP01709 Figure 76. Installing Feet on Chassis 5. Put chassis in the upright position. 6. Reconnect all peripheral devices and the AC power cable to the server. Power up the server. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 59
  • Intel SC5299-E | User Guide - Page 78
    Hardware Installations and Upgrades 60 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 79
    cage kit with a SAS/SATA backplane without expander (part number AXX6DRV3G) or a SAS/SATA backplane with expander (part number AXX6DRV3GEXP). Tools and Supplies Needed of the chassis as it would be positioned for pedestal operation. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 61
  • Intel SC5299-E | User Guide - Page 80
    Shield from Chassis (DP/WS/ BRP configuration shown) 6. Disconnect cables from any fixed hard drives and remove hard drives from fixed hard drive cage. For instructions on removing fixed hard drives, see "Removing a Fixed Hard Drive". 62 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 81
    shown) 8. Gather together the components for the hot swap drive cage installation. You should have a hot swap drive cage with either a SAS/SATA or SCSI backplane, a side filler panel, a latch plate, a fan bracket, and a fan. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 63
  • Intel SC5299-E | User Guide - Page 82
    top of the hot swap drive cage. TP01135 Figure 79. Removing Stud Screws from Hot Swap Drive Cage 10. Attach the latch plate to the left side of the hot swap drive cage. TP01060 Figure 80. Attaching Latch Plate to Hot Swap Drive Cage 64 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 83
    the hot swap drive cage. TP01059 Figure 81. Attaching Filler Panel to Hot Swap Drive Cage 12. Remove the two thumb screws that secure the backplane to the hot swap drive cage. TP01716 Figure 82. Removing Thumb Screws from Backplane Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 65
  • Intel SC5299-E | User Guide - Page 84
    once the thumb screws were removed. Ensure that the backplane is positioned correctly before re-tightening the thumb screws. B A B TP01061 Figure 83. Attaching Fan Bracket to Hot Swap Drive Cage (SAS/SATA drive cage illustrated) 66 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 85
    the fan bracket. Press the fan into the fan bracket until is clicks into place. Caution: Ensure that the label and directional airflow arrow on fan are pointed out (away from the backplane). TP01062 Figure 84. Attaching Fan to Fan Bracket Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 86
    Hot Swap Drive Cage into Chassis (DP/WS/BRP configuration shown) 16. Connect fan cable to the appropriate connector on the server board. See your server board documentation for information on the location of the fan cable connector. 68 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 87
    Intel® Server Board S5000VSA, use FAN1. For other Intel® server boards, refer to the Quick Start User's Guide that came with the server board. B C A TP02056 Figure 86. Cabling the SCSI Hot Swap Drive Cage (DP/WS/BRP configuration shown) Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 88
    0 AB C DE HDD 1 HDD 3 HDD 2 HDD 5 HDD 0 HDD 4 AF00450 A. Power cable B. Data Cable C. IPMB D. SES (not available in AXX6DRV3GEXP) Figure 87. Layout of Cable Connectors on the SAS/SATA Backplane (Backplane without expander shown) 70 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 89
    E HHDDDD HHDDDD 1 0 3 2 HHDDDD 5 4 B AF00449 Figure 88. Making Six-drive SAS/SATA Hot-Swap Drive Cage Backplane without Expander Connections (DP/WS/BRP configuration shown - fan bracket not shown in the illustration for clarity) Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 71
  • Intel SC5299-E | User Guide - Page 90
    assembly. For instructions, see "Installing the Front Bezel Assembly". 20. Install the left side cover. For instructions, see "Installing the Left Side Cover". 21. Plug all peripheral devices and the AC power cable into the server. 72 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 91
    Chassis SC5299-E does not support all hard drives. See "Additional Information and Software"for an Internet link to a list of supported hard drives. 1. Open the drive bay access door. AF000311 Figure 90. Opening Drive Bay Access Door Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 92
    . 5. Set any jumpers and/or switches on the drive according to the drive manufacturer's instructions. 6. With the drive circuit-side down, position the connector end of the drive so that it is facing the rear of the drive carrier. 74 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 93
    Hot Swap Drive Cage Upgrade Install Instructions (optional) 7. Align the holes in the drive to the holes in the drive carrier and the drive carrier into place. AF000313 Figure 94. Re-installing Drive Carrier in Hot Swap Drive Cage Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 75
  • Intel SC5299-E | User Guide - Page 94
    Instructions (optional) 9. Close the drive bay access door. AF000314 Figure 95. Closing Drive Bay Access Door Removing a Hot-swap Hard Drive 1. Open the drive bay access door. AF000311 Figure 96. Opening Drive Bay Access Door 76 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 95
    from Hot Swap Drive Cage 3. Remove the four screws that attach the hard drive to the drive carrier. Lift the drive from the carrier. Store the old drive in an anti-static bag. TP01714 Figure 98. Removing Hard Drive from Drive Carrier Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 77
  • Intel SC5299-E | User Guide - Page 96
    carrier into the chassis. The green latch must be to the left. Do not push on the black lever until the lever begins to close by itself. When the black lever begins to close by itself, push on it to lock the drive carrier into place. 78 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 97
    be replaced in the chassis, even if no hard drive is installed in it. AF000313 Figure 101. Re-installing Drive Carrier in Hot Swap Drive Cage 6. Close the drive bay access door. AF000314 Figure 102. Closing Drive Bay Access Door Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 79
  • Intel SC5299-E | User Guide - Page 98
    Hot Swap Drive Cage Upgrade Install Instructions (optional) 80 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 99
    a Rack-configured Chassis 1. Observe the safety and ESD precautions listed in Appendix A, "Safety Information". 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Lay the chassis down on its right side. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 100
    . B A TP01710 Figure 103. Removing Chassis Feet 5. Remove the top side cover by pressing the latch and pushing back on the side cover to slide rearward and lift from chassis. TP00958 Figure 104. Removing Top Side Cover from Chassis 82 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 101
    Remove any PCI add-in boards. Remove the PCI card guide by pressing in on the blue tabs (see letter "A" in the following figure) and pulling the PCI card guide outward (see letter "B"). A B TP02001 Figure 105. Removing PCI Card Guide Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 83
  • Intel SC5299-E | User Guide - Page 102
    by pushing on interior tab (see letter "A" in the following figure) and sliding filler panel towards rear of chassis (see letter "B"). B A AF000285 Figure 106. Removing Plastic Filler Panel from Chassis (DP/WS/BRP configuration shown) 84 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 103
    left side of chassis. AF000286 Figure 107. Removing Plastic Plugs (DP/WS/BRP configuration shown) 9. Remove two screws from left and right sides of chassis. AF000287 Figure 108. Removing Rear Screws (DP/WS/BRP configuration shown) Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 85
  • Intel SC5299-E | User Guide - Page 104
    four plastic plugs from top side cover. TP02004 Figure 109. Removing Plastic Plugs from Top Side Cover 11. Install rack handle on left side cover using four 6-32 screws. TP01053 Figure 110. Installing Rack Handle on Left Side Cover 86 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 105
    111. Affixing Label to Front Panel 13. Install top side cover on chassis. Warning: This chassis must be operated with the left side cover installed to ensure proper cooling. TP01057 Figure 112. Installing Top Side Cover on Chassis Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 87
  • Intel SC5299-E | User Guide - Page 106
    Mount Kit Install Instructions (optional) 14. Detach inner rack rail from rack rail assembly. Press tab on inside of rack rail to release rack rail from rack rail assembly. TP02006 Figure 113. Detaching Inner Rack Rail from Rack Rail Assembly 88 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP
  • Intel SC5299-E | User Guide - Page 107
    shown) 16. Attach outer rack rails to rack uprights. Ensure that the screws (two per outer rack rail; see letter "A" in the following figure) pass through the rack upright (see letter "B"), and the outer rack rail (see letter "C"). Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 89
  • Intel SC5299-E | User Guide - Page 108
    Rack Mount Kit Install Instructions (optional) C A B TP01056 Figure 115. Attaching Outer Rack Rails to Rack Uprights 90 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 109
    system requires TWO people. WARNING: Safe handling of this system requires TWO people. TP01058 Figure 116. Installing Chassis into Rack 18. Reconnect all peripheral devices and the AC power cable to the server. Power up the server. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 91
  • Intel SC5299-E | User Guide - Page 110
    Rack Mount Kit Install Instructions (optional) 92 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 111
    about calculating the power usage for your configuration, see "Calculating Power Usage." Table 4. 420-W Power Supply Output Capability Voltage +3.3 V +5.0 V +5 V Standby +12.0 -12.0 V Maximum Current 17 A 20 A 20 A 30 A 0.5 A Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 93
  • Intel SC5299-E | User Guide - Page 112
    do not exceed the combined total wattage of 670 Watts. Table 6. 670-W Power Supply Output Capability Voltage +3.3 V +5.0 V +5 V Standby +12 V1 +12 V2 +12 V3 +12 V4 -12.0 V Maximum Current 24 A 30 A 3.0 A 16 A 16 A 16 A 16 A 0.5 A 94 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 113
    Acoustic noise DP, BRP configurations - 5.5 BA LWA idle; 6.0 BA LWA typical operation WS configuration - 4.8 BA LWA idle; 5.5 BA LWA typical operation Electrostatic Tested to 15 kilovolts (kV); no component damage. discharge (ESD) Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 95
  • Intel SC5299-E | User Guide - Page 114
    Technical Reference 96 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 115
    or death if safety instructions are not followed. Indicates hot components or surfaces. Indicates do not touch fan blades, may result in injury. Indicates to unplug all AC power cord(s) to disconnect AC power Please recycle battery Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 97
  • Intel SC5299-E | User Guide - Page 116
    , 5V standby power is active whenever the system is plugged in. To remove power from system, you must unplug the AC power cord from the wall outlet. Your system may use more than one AC power cord. Make sure all AC power cords are 98 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 117
    inside of the product: • Turn off all peripheral devices connected to this product. • Turn off the system by pressing the power button to off. • Disconnect the AC power by unplugging all AC power cords from the system or wall outlet. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 99
  • Intel SC5299-E | User Guide - Page 118
    carefully. They can be extremely sensitive to ESD. Hold boards only by their edges. After removing a board from its protective wrapper or from the server, place the board component side up on a grounded, static free surface. Use a 100 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 119
    problems. For proper cooling and airflow, operate the system only with the chassis Attach the covers to the chassis according to the product instructions. Laser Peripherals or Devices serviceable • Return to manufacturer for servicing Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 101
  • Intel SC5299-E | User Guide - Page 120
    Sicherheitshinweise für den Server Das vorliegende Dokument bezieht sich auf Intel® Serverplatinen, Intel® Servergehäuse (Standfuß und Rack) sowie installierte Peripherieger Netzspannung zu trennen. Bereiten Sie bitte Batterie auf 102 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 121
    Transportieren oder Anheben von Geräten. • Entfernen Sie alle Komponenten, die sich leicht abnehmen lassen, um das Gewicht zu reduzieren und die Handhabung zu erleichtern. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 103
  • Intel SC5299-E | User Guide - Page 122
    vom Stromnetz. Die Steckdose muß in der Nähe der Anlage angebracht und gut erreichbar sein. • Netzkabel müssen an eine ordnungsgemäß geerdete Steckdose angeschlossen sein. 104 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 123
    Schicken Sie das Gerät für Wartungsarbeiten an den Hersteller zurück. • Schalten Sie den Server aus, und ziehen Sie alle Netzkabel ab, bevor Sie Komponenten ein- oder ausbauen, die nicht nicht ohne diese Abdeckung betrieben werden. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 105
  • Intel SC5299-E | User Guide - Page 124
    und nicht nur zu den Servern. Zur Vermeidung von Stromschlaggefahr müssen das Rack selbst und alle darin eingebauten Geräte ordnungsgemäß geerdet sein. Elektrostatische Entladungen Ziehen Sie die Platine nicht über eine Fläche. 106 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 125
    oder Laser- Komponenten. • Laser-Peripheriegeräte oder -Komponenten besitzen keine für den Benutzer wartungsbedürftigen Teile. • Schicken Sie das Gerät für Wartungsarbeiten an den Hersteller zurück. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 107
  • Intel SC5299-E | User Guide - Page 126
    document s'applique aux cartes serveur Intel®, au châssis de serveur Intel® (sur pieds et sur rack) et aux périphériques Vous devez suivre les informations de ce guide et les instructions d'assemblage des manuels de serveur pour vé 108 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 127
    autre assistance appropriée lorsque vous déplacez et soulevez le matériel. • Pour réduire le poids en vue de faciliter la manipulation, retirez tout composant amovible. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 109
  • Intel SC5299-E | User Guide - Page 128
    cordons d'alimentation doivent répondre aux critères suivants : • Le cordon d'alimentation doit supporter une intensité supérieure à celle indiquée sur le produit. • Le cordon d' électriques correctement reliées à la terre. 110 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 129
    . Si votre système est fourni avec une protection sur le ventilateur, ne mettez pas le système en route sans la protection en place. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 111
  • Intel SC5299-E | User Guide - Page 130
    . Utilisez si possible un tapi de mousse conducteru, mais pas l'emballage de la carte. Veillez à ce que la carte ne glisse sur aucune surface. 112 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 131
    composants sont correctement installés. • Fixez les panneaux au châssis en suivant les instructions du produit. Périphériques laser Attention: Pour éviter tout risque d'exposition aux • Retournez-les au fabricant en cas de problème. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 113
  • Intel SC5299-E | User Guide - Page 132
    advertencias y precauciones de esta guía antes de instalar o mantener el producto de servidor de Intel®. En el caso de que haya diferencias entre la información para un producto en particular ón de CA Recicle por favor la batería 114 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 133
    sean adecuados al trasladar o levantar el equipo. • Para que el peso sea menor para manipularlo con más facilidad, extraiga los componentes que sean de fácil extracción. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 115
  • Intel SC5299-E | User Guide - Page 134
    ón en funcionamiento. Algunas fuentes de alimentación de electricidad de los servidores de Intel utilizan el polo neutral del fuselaje. Para evitar riesgos de choques electricos use de forma inmediata con el fin de desconectarlos. 116 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 135
    se le ha suministrado con una protección para el ventilador, asegúrese de que cuando esté funcionando el sistema la protección esté en su sitio. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 117
  • Intel SC5299-E | User Guide - Page 136
    . Utilice una almohadilla de espuma conductora si dispone de ella, pero nunca el envoltorio de la tarjeta. No deslice la tarjeta sobre ninguna superficie. 118 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 137
    caja de ningún periférico o dispositivo láser • Los periféricos o dispositivos láser no pueden ser reparados por el usuario • Haga que el fabricante los repare. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 119
  • Intel SC5299-E | User Guide - Page 138
    Safety Information 简体中文 I nt el I nt el I nt el Web UL 120 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 139
    Safety Information ITE ITE 场地选择 注意事项 5V Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 121
  • Intel SC5299-E | User Guide - Page 140
    Safety Information 122 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 141
    Safety Information ESD) ESD ESD ESD ESD Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 123
  • Intel SC5299-E | User Guide - Page 142
    Safety Information 其他危险 替换电池 124 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 143
    remove the padlock from the back of the system if a padlock has been installed. 2. Remove and save all screws from the covers. 3. Remove the cover(s). Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 125
  • Intel SC5299-E | User Guide - Page 144
    the equipment manufacturer. Dispose of used batteries according to manufacturer's instructions. The system is designed to operate in a typical office power supply cord(s), because they serve as the product's main power disconnect. 126 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 145
    Deutsch Installation/Assembly Safety Instructions Benutzer können am Netzgerät dieses Produkts keine Reparaturen vornehmen. Das Produkt enthä zu vermeiden. 6. Schalten Sie das System niemals ohne ordnungsgemäß montiertes Gehäuse ein. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 127
  • Intel SC5299-E | User Guide - Page 146
    Installation/Assembly Safety Instructions SICHERHEISMASSNAHMEN: Immer wenn Sie die Gehäuseabdeckung abnehmen um an das Systeminnere zu ersetzt werden. Entsorgen Sie verbrauchte Batterien den Anweisungen des Herstellers entsprechend. 128 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 147
    Installation/Assembly Safety Instructions Das System wurde für den Betrieb in einer normalen Büroumgebung entwickelt. Der Standort sollte: • ährleisten, da der Stromanschluß des Produkts hauptsächlich über die Kabel unterbrochen wird Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 129
  • Intel SC5299-E | User Guide - Page 148
    Installation/Assembly Safety Instructions Français Le bloc d'alimentation de ce produit ne contient aucune pièce pouvant être réparée 2. Retirez toutes les vis des panneaux et mettez-les dans un endroit sûr. 3. Retirez les panneaux. 130 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 149
    ou d'un type équivalent recommandé par le fabricant. Disposez des piles usées selon les instructions du fabricant. Le système a été conçu pour fonctionner dans un cadre de travail normal seul moyen de mettre le système hors tension). Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 131
  • Intel SC5299-E | User Guide - Page 150
    Installation/Assembly Safety Instructions Español El usuario debe abstenerse de manipular los componentes de la fuente de alimentación de se ha instalado uno. 2. Extraiga y guarde todos los tornillos de las tapas.Extraiga las tapas. 132 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 151
    Installation/Assembly Safety Instructions Para obtener un enfriamiento y un flujo de aire adecuados, reinstale siempre las tapas del a los cables de alimentación, ya que éstos hacen de medio principal de desconexión del sistema. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 133
  • Intel SC5299-E | User Guide - Page 152
    Installation/Assembly Safety Instructions Italiano Rivolgersi ad un tecnico specializzato per la riparazione dei componenti dell'alimentazione di e mettere in un posto sicuro tutte le viti delle coperture. 3. Togliere le coperture. 134 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 153
    Installation/Assembly Safety Instructions Per il giusto flusso dell'aria e raffreddamento del sistema, rimettere sempre le ad accedere ai cavi di alimentazione, i quali rappresentano il mezzo principale di scollegamento del sistema. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 135
  • Intel SC5299-E | User Guide - Page 154
    Installation/Assembly Safety Instructions 136 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 155
    support.intel.com/support/motherboards/server/chassis/sc5299-e/. Telephone All calls are billed US $25.00 per incident, levied in local currency at the applicable credit card exchange rate plus applicable taxes. (Intel UK 870 6072439 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 137
  • Intel SC5299-E | User Guide - Page 156
    621 33104691 (not toll-free) Hong Kong 852 2 844 4456 India........... 0006517 2 68303634 (manual toll-free. You need an IDD-equipped telephone) Indonesia ... 803 65 7249 Korea ......... 822 288. Once connected, dial 800 843 4481 138 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 157
    0114 Peru 001 916 377 0114 Uruguay..... 001 916 377 0114 Venezuela... Contact AT&T USA at 0 800 2255 288. Once connected, dial 800 843 4481 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 139
  • Intel SC5299-E | User Guide - Page 158
    Getting Help 140 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 159
    to include a detailed problem description Board / Chassis Information Baseboard Revision - PBA Baseboard Serial Number Chassis Model CPU1 Speed/Stepping/Spec CPU2 Speed/Stepping/Spec System BIOS Version HSC Firmware Version Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 141
  • Intel SC5299-E | User Guide - Page 160
    Service Pack Add-in Card, Peripheral, Video, NIC Check each box below as applicable, and provide the requested information. Peripheral Card or Peripheral Description Driver Driver Revision IRQ I/O Base FW Address Revision 142 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 161
    Make/Model Intel® Server Issue Report Form Driver Revision IRQ Intel® Management Module - Professional Edition Intel® Management Module - Advanced Edition Control Panel Information Standard Control Panel Intel® Local Control Panel Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 162
    Description In the space below, provide a complete description of the steps used to reproduce the problem or a complete description of where the problem can be found. Please also include any details on troubleshooting already done 144 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 163
    does not cover damages due to external causes, including accident, problems with electrical power, usage not in accordance with product instructions, misuse, neglect, alteration, repair, improper installation, or improper testing. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 145
  • Intel SC5299-E | User Guide - Page 164
    repair for the product, please go to the following Web site to obtain instructions: http://support.intel.com/support/ motherboards/draform.htm • In Europe and in Asia Contact your original authorized distributor for warranty service. 146 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 165
    .com/), call your local distributor or an Intel Customer Support representative. See "Getting Help" for telephone numbers. Returning a Defective Product Before returning any product, call your authorized dealer/distribution authority. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 166
    Warranty 148 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 167
    chassis complies with the following product safety requirements: • UL60950 - CSA 60950 (USA / Canada) • EN60950 (Europe) • IEC60950 (International) • CB Certificate & Report, IEC60950 (report to include all country national deviations) Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 168
    ) & 1997-42 (EMI) (Korea) Certifications / Registrations / Declarations • UL Certification (US/Canada) • CE Declaration of Conformity (CENELEC Europe) • FCC/ICES-003 Class A Attestation (USA/Canada) 150 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 169
    • Ecology Declaration (International) Product Regulatory Compliance Markings This Intel® server chassis product bears the following regulatory marks. Table 9. Product USA EMC Marking (Class A) Canada VCCI Marking (Class A) Japan Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 151
  • Intel SC5299-E | User Guide - Page 170
    radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that by one or more of the following measures: 152 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 171
    Directive (73/23/EEC) and EMC Directive (89/336/EEC). The product has been marked with the CE Mark to illustrate its compliance. VCCI (Japan) Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 153
  • Intel SC5299-E | User Guide - Page 172
    interference. Install and use the equipment according to the instruction manual. BSMI (Taiwan) The BSMI Certification Marking and EMC Intel Server Builder Web site at the following URL: http://channel.intel.com/go/serverbuilder 154 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • Intel SC5299-E | User Guide - Page 173
    Intel's Web address, please contact your local Intel representative. • Server Chassis: (base chassis is provided with power supply and fans) - UL listed. • Server board: you must use an Intel server recycling and / or take back. Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 155
  • Intel SC5299-E | User Guide - Page 174
    Regulatory and Compliance Information 156 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
Intel® Entry Server Chassis SC5299-E
UP/DP/WS/BRP User Guide
A Guide for Technically Qualified Assemblers of Intel
®
Identified Subassemblies/Products
Intel Order Number D37596-00
4