Intel SR1520MLNA User Guide

Intel SR1520MLNA - Sy 1U 600W Dual X38Ml Mb 2.5Sata Hdd Ddr2 2Pci-E X16 Risers Manual

Get Intel SR1520MLNA - Sy 1U 600W Dual X38Ml Mb 2.5Sata Hdd Ddr2 2Pci-E X16 Risers PDF manuals and user guides
UPC - 735858197434
View all Intel SR1520MLNA manuals
Add to My Manuals
Save this manual to your list of manuals

Intel SR1520MLNA manual content summary:

  • Intel SR1520MLNA | User Guide - Page 1
    Intel® Server System SR1520ML User's Guide A Guide for Technically Qualified Assemblers of Intel® Identified Subassemblies/ Products Intel Order Number E17409-004
  • Intel SR1520MLNA | User Guide - Page 2
    Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. * Other names and brands may be claimed as the property of others. Copyright © 2010, Intel Corporation. All Rights Reserved ii Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 3
    este documento antes de realizar cualquiera de las instrucciones. Vea Intel Server Boards and Server Chassis Safety Information en el Intel® Server Deployment Toolkit 2.0 CD y/o en http://support.intel.com/support/motherboards/server/sb/cs-010770.htm. Intel® Server System SR1520ML User's Guide iii
  • Intel SR1520MLNA | User Guide - Page 4
    support.intel.com/support/motherboards/server/sb/CS-010770.htm 上的 Intel Server Boards and Server Chassis Safety Information（《Intel Warnings Heed safety instructions: Before working with your server product, whether you are using this guide surface. iv Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 5
    narrow sides of the jumper with the pliers, never the wide sides. Gripping the wide sides can damage the contacts inside the jumper, causing intermittent problems with the function controlled by that jumper. Take care to grip with, but not squeeze, the pliers or other tool you use to remove a jumper
  • Intel SR1520MLNA | User Guide - Page 6
    vi Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 7
    Instructions iii Wichtige Sicherheitshinweise iii Consignes de sécurité ...iii Instrucciones de seguridad importantes iii Warnings ...iv Preface ...xvii About this Manual ...xvii Manual Support ...11 Rack and Cabinet Mounting 11 Hardware Requirements ...11 Processor Installing an Intel® Z-U130 Value
  • Intel SR1520MLNA | User Guide - Page 8
    a PCI Add-in Card 27 Removing and Installing the Processor Air Duct 28 Removing the Processor Air Duct 28 Installing the Processor Air Duct 29 Installing and Removing Memory 29 Memory Population (J1A4 68 Appendix A: Technical Reference 71 viii Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 9
    Instructions 77 English ...77 Deutsch ...79 Français ...81 Español ...83 Italiano ...86 Appendix C: Troubleshooting 89 Resetting the System ...89 Problems Warranty for Intel® Chassis Subassembly Products 103 Appendix F: Safety Information 107 Intel® Server System SR1520ML User's Guide ix
  • Intel SR1520MLNA | User Guide - Page 10
    ubicación 124 Manipulacién del equipo 125 Advertencias de alimentacién y eléctricas 125 Advertencias sobre el cable de alimentación 125 Advertencias el acceso al sistema 126 x Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 11
    137 VCCI (Japan) ...137 BSMI (Taiwan) ...137 Korean Compliance (RRL 138 Regulated Specified Components 138 Product Ecology Requirements 139 End-of-Life/Product Recycling 140 Intel® Server System SR1520ML User's Guide xi
  • Intel SR1520MLNA | User Guide - Page 12
    xii Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 13
    Key Use 60 Table 5. Power Supply Output Capability 74 Table 6. System Environmental Specifications 75 Table 7. Resetting the System 89 Table 8. Product Regulatory Compliance Markings 133 Intel® Server System SR1520ML User's Guide xiii
  • Intel SR1520MLNA | User Guide - Page 14
    xiv Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 15
    26 Figure 20. Removing an Add-In Card 27 Figure 21. Removing the Processor Air Duct 28 Figure 22. Installing the Processor Air Duct 29 Figure 23. Installing Memory DIMMs 31 Figure 24. Removing Memory 52 Figure 42. Installing Front Panel Board 53 Intel® Server System SR1520ML User's Guide xv
  • Intel SR1520MLNA | User Guide - Page 16
    Position 67 Figure 50. iBMC Boot Block Write Protect Jumper (J1A4 68 Figure 51. Power Cable Routing 72 Figure 52. Data Cable Routing 73 xvi Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 17
    reference information, feature information, and step by step instructions on how to add and replace components on the server system. For the latest version of this manual, see http:// support.intel.com/support/motherboards/server/X38ML/. Manual Organization Chapter 1 provides an overview of the
  • Intel SR1520MLNA | User Guide - Page 18
    x16 risers, installed in the server system • Two processor/memory air ducts • Rack handles, in the Intel® Server Deployment Toolkit 2.0 CD that contains documentation, drivers, and utilities • Intel® System Management Software 2.0 CD set (two CDs) xviii Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 19
    /motherboards/server/X38ML/ See http://support.intel.com/support/motherboards/server/X38ML/ Search for the word "driver" (for an extensive list of available drivers) Search for "operating system driver" (for operating system drivers) Firmware Updates Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 20
    Intel® System Management Software Software 2.0 At http://support.intel.com/support/motherboards/server/X38ML/ Search for the phrase "Power Budget Tool" At http://support.intel.com/support/motherboards/server/X38ML/ Search for the word "Diagnostics" xx Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 21
    boards. The two server boards share the chassis and power supply. Since the server boards function independently, the processor and DIMM rules apply to each board independently. The two server boards do not need to use identical processors or DIMMs. Intel® Server System SR1520ML User's Guide 1
  • Intel SR1520MLNA | User Guide - Page 22
    20 inches deep (508.00 mm) Intel® Server Board X38ML. Two per system. Processor and Front Side Bus (FSB) support • The system supports one processor on each server board. For supported Intel processors, see http://support.intel.com/ support/motherboards/server/X38ML • Supports 800/1066/1333 MHz FSB
  • Intel SR1520MLNA | User Guide - Page 23
    on the back panel • Each server board has one internal USB header, which supports two USB ports Intel® System Management 2.0 Software External Component Identification This section helps you identify the panel includes the following buttons and LEDs. Intel® Server System SR1520ML User's Guide 3
  • Intel SR1520MLNA | User Guide - Page 24
    is ready to be applied to the board Green Blink Board is in sleep state S1 Off DC Power supply is in the 'Off' state 4 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 25
    Drive State Green blink Drive is active Off Drive is not active G System reset button Press to reset the system Figure 2. Front Controls and LEDs Intel® Server System SR1520ML User's Guide 5
  • Intel SR1520MLNA | User Guide - Page 26
    network connection Network connection in place Transmit/receive activity 10 Mbps connection (if left LED is on or blinking) 100 Mbps connection 1000 Mbps connection 6 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 27
    Solid State Drive Mounting Kit Installation Guide for Intel® Server Systems. Note: Drives can consume up to 17 watts of power each. Drives must be specified to run at a maximum ambient temperature of 45oC. Note: The Intel® Server System SR1520ML does not support all Serial ATA (SATA) hard drives
  • Intel SR1520MLNA | User Guide - Page 28
    E H F G AF002493 A. Memory cooling fans (two) B. Processor and memory air duct (two) C. Processor and heat sink (two) D. PCI add-in card bracket (two Server Board Connectors The two Intel® Server Boards X38ML have the same connectors / components. 8 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 29
    DB9 connector F. VGA connector G. POST LEDs H. PCI Express* x16 riser slot I. Processor socket J. Front panel connector Q. DIMM socket B1 R. DIMM socket B2 K. System fan 2 and 3 X. Chassis intrusion header Figure 6. Server Board Connector Locations Intel® Server System SR1520ML User's Guide 9
  • Intel SR1520MLNA | User Guide - Page 30
    Configuration Jumpers The two Intel® Server Boards X38ML have the same jumpers. A B D C E Callout A B C D E Location J1A4 J1A2 J1A3 J3A1 J6B1 on the next boot. Pins 1-2 should be jumpered for normal operation. Figure 7. Configuration Jumpers 10 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 31
    Support The Intel® Server System SR1520ML provides SATA (3.0 Gb/s) support.The embedded SATA controller embedded supports both 1.5 and 3.0 Gbps data transfer rates. The Intel about setting up RAID, see the RAID Software Guide that is included on the Intel® Server Deployment Toolkit 2.0 CD. Rack and
  • Intel SR1520MLNA | User Guide - Page 32
    total memory in each channel is the same. • For dual-channel asymmetric mode, DIMM sockets may be populated in any order. For a complete list of supported memory DIMMs, see http://support.intel/com/support/ motherboards/server/X38ML. 12 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 33
    components in the Intel® Server System SR1520ML are hot swappable. Before removing or installing any component in this server system, you must first take the server out of service, turn off server system as it would be positioned for normal operation. Intel® Server System SR1520ML User's Guide 13
  • Intel SR1520MLNA | User Guide - Page 34
    cover about 3/4 inch, until it stops, then lift up on the cover to remove it. See letter "C". A C B AF002500 Figure 8. Removing the Server System Cover 14 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 35
    hot swappable. Before removing or replacing a hard drive, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power bays are at the right side of the chassis. Intel® Server System SR1520ML User's Guide 15
  • Intel SR1520MLNA | User Guide - Page 36
    link to a list of supported hardware. Installing a Hard Drive Note: If you are replacing a hard drive, see "Removing a Hard Drive" on page 18 for instructions first. Return to these steps AF002600 Figure 10. Removing Drive Carrier from the Server System 16 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 37
    you lifted out the power supply to access the drive bracket screws, set the power supply back into place. See letter "C" in the figure below. Intel® Server System SR1520ML User's Guide 17
  • Intel SR1520MLNA | User Guide - Page 38
    and unplug all peripheral devices and the AC power cable. 3. Remove the server system cover. For instructions, see "Removing the Server System Cover" on page 14. 4. Remove the screws that hold the from the chassis. See letter "B" in the figure below. 18 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 39
    "A" in the figure below. 11. Attach the drive assembly to the chassis with the screws that you removed earlier. See letter "B" in the figure below. Intel® Server System SR1520ML User's Guide 19
  • Intel SR1520MLNA | User Guide - Page 40
    instructions, see "Installing the Server System Cover". Installing an Intel® Z-U130 Value Solid State Drive Caution: The Intel® VSSD is NOT hot swappable. Before removing or replacing the Intel® VSSD, you must first take the server out of service iii. 20 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 41
    the instructions in the document titled Intel® Z-U130 Value Solid State Drive Mounting Kit Installation Guide for Intel® Server riser assembly, you must first take the server out of service, turn off all peripheral devices connected to the system, turn Intel® Server System SR1520ML User's Guide 21
  • Intel SR1520MLNA | User Guide - Page 42
    Add-in Card" on page 26. 9. If you removed the PCI riser assembly as instructed in another procedure, continue with that procedure. Installing the PCI Riser Assembly Note: For clarity, the figure in the riser assembly bracket. See letter "B" in the figure. 22 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 43
    B A AF002513 Figure 16. Installing PCI Riser Assembly into the Server System 4. Install the server system cover. For instructions, see "Installing the Server System Cover". Intel® Server System SR1520ML User's Guide 23
  • Intel SR1520MLNA | User Guide - Page 44
    replacing the PCI riser card, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the card. For instructions, see "Installing a PCI Riser Card" on page 25. 9. Choose the appropriate action: 24 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 45
    appropriate action: - Install a PCI add-in card if desired. For instructions, see "Installing a PCI Addin Card" on page 26. - Install the PCI riser assembly into the server system. For instructions, see "Installing the PCI Riser Assembly" on page 22. Intel® Server System SR1520ML User's Guide 25
  • Intel SR1520MLNA | User Guide - Page 46
    in card, you must first take the server out of service, turn off all peripheral devices connected to the system, turn cover. For instructions, see "Removing the Server System Cover" on page 14. 4. Remove the PCI riser assembly. For instructions, see "Removing Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 47
    -in card documentation for information. 10. Install the PCI riser assembly into the server system. For instructions, see "Installing the PCI Riser Assembly" on page 22. Removing a PCI Add-in Card 1. 5. A B Figure 20. Removing an Add-In Card AF002514 Intel® Server System SR1520ML User's Guide 27
  • Intel SR1520MLNA | User Guide - Page 48
    power cable. 3. Remove the server system cover. For instructions, see "Removing the Server System Cover". 4. Lift the processor air duct from its location behind the two fans. See the figure below. AF002502 Figure 21. Removing the Processor Air Duct 28 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 49
    instructions, see "Installing the Server System Cover". Installing and Removing Memory Caution: The memory is NOT hot swappable. Before removing or replacing any memory DIMM, you must first take the server out of service, turn off all peripheral devices connected to Intel® Server System SR1520ML
  • Intel SR1520MLNA | User Guide - Page 50
    . 3. Remove the server system cover. For instructions, see "Removing the Server System Cover" on page 14. 4. Remove the processor air duct. For instructions, see "Removing the Processor Air Duct" on page 28. 5. Locate the DIMM sockets. See Figure 23. 30 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 51
    firmly in place. See letter "D" in the figure. 12. Install the processor air duct. For instructions, see "Installing the Processor Air Duct" on page 29. 13. Install the server system cover. For instructions, see "Installing the Server System Cover". Intel® Server System SR1520ML User's Guide 31
  • Intel SR1520MLNA | User Guide - Page 52
    the server system cover. For instructions, see "Removing the Server System Cover" on page 14. 4. Remove the processor air duct. For instructions, see "Removing the Processor Air Duct" on page 28 DIMM Socket A1 Figure 24. Removing Memory DIMMs AF002518 32 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 53
    processor. 7. Lift the heat sink from the processor. If it does not pull up easily, twist the heat sink again. Do not force the heat sink from the processor, which could damage it. 8. Raise the processor socket handle completely. See the following figure. Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 54
    AF000095 Figure 25. Opening the Processor Socket Handle 9. Push the rear tab with your finger to slightly lift the touch the socket pins; they are very sensitive and easily damaged. 10. Lift the processor from the socket. See the following figure. 34 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 55
    damaged. 1. Remove the processor from the packaging box and remove the protective shipping cover. 2. Orient the processor with the socket so the processor cutouts match the socket notches, then set the processor into place. See the following figure. Intel® Server System SR1520ML User's Guide 35
  • Intel SR1520MLNA | User Guide - Page 56
    surrounding the processor as shown by letter "B". 4. Loosely screw in the captive screws on the heat sink corners in a diagonal manner as shown by the four circled numbers in the figure below. Do no fully tighten one screw before tightening another. 36 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 57
    Processor Air Duct" on page 29. 7. Install the server system cover. For instructions, see "Installing the Server System Cover". Replacing the Power Supply Caution: The power supply is NOT hot swappable. Before removing or replacing the power supply, you must first take the server out of service
  • Intel SR1520MLNA | User Guide - Page 58
    3. Remove the server system cover. For instructions, see "Removing the Server System Cover". 4. Disconnect all power cables connected to the server board letters "C" and "D" in the figure. . A B CD Figure 30. Disconnecting Power Cables AF002580 38 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 59
    drive carriers and the wall of the system. 13. Insert the cable bundle into the cable harness and then close the harness over the cables. Intel® Server System SR1520ML User's Guide 39
  • Intel SR1520MLNA | User Guide - Page 60
    Figure 30 on page 38 17. Install the server system cover. For instructions, see "Installing the Server System Cover". 18. Plug all peripheral devices or replacing the fan assembly, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the
  • Intel SR1520MLNA | User Guide - Page 61
    3. Remove the server system cover. For instructions, see "Removing the Server System Cover". 4. Remove the processor air duct. For instructions, see "Removing the Processor Air Duct" on page 28. 5. USB, and SATA cables. See letter "B" in the figure. Intel® Server System SR1520ML User's Guide 41
  • Intel SR1520MLNA | User Guide - Page 62
    A B AF002507 Figure 34. Removing Bracket and Fans 42 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 63
    pinch any cables when you connect the main power supply connectors. Make sure the fan cables will not block airflow from the memory cooling fans. Intel® Server System SR1520ML User's Guide 43
  • Intel SR1520MLNA | User Guide - Page 64
    the server system cover. For instructions, see "Removing the Server System Cover". 4. Remove the processor air duct. For instructions, see "Removing the Processor Air Duct" on page 28 B A C D AF002504 Figure 36. Disconnecting Memory Cooling Fan Cable 44 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 65
    not block airflow from the memory cooling fans. See letter "D" in the figure. C D B A AF002504 Figure 37. Connecting Memory Cooling Fan Cable 13. Install the processor air duct. For instructions. see "Installing the Processor Air Duct" on page 29. Intel® Server System SR1520ML User's Guide 45
  • Intel SR1520MLNA | User Guide - Page 66
    . For instructions, see "Removing DIMMs" on page 32. 10. Remove the six screws from the server board. See letter "A" and the arrows indicating the screw locations in the figure below. Lift the server board from the server system. See letter "B" in the figure. 46 Intel® Server System SR1520ML User
  • Intel SR1520MLNA | User Guide - Page 67
    instructions, see "Installing the Server System Cover". 14. Plug all peripheral devices and the AC power cable into the server. 15. Store the components you removed (processor, DIMMs, PCI riser assembly, server board) in anti-static bags for future use. Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 68
    with six screws. See letter "B" and the arrows indicating the screw locations in the figure. B A Figure 39. Installing the Server Board AF002521 8. Install the processor and the heat sink. For instructions, see "Installing the Processor" on page 35. 48 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 69
    9. Install the system memory. For instructions, see "Installing DIMMs" on page 30. Notes: • Use caution when connecting cables to (letter "D") 11. Connect the cables at the rear of the server board. - USB_2_3 (letter "C") - SATA_0 (letter "B") Intel® Server System SR1520ML User's Guide 49
  • Intel SR1520MLNA | User Guide - Page 70
    instructions, see "Installing the PCI Riser Assembly" on page 22. 13. Install the processor air duct. For instructions, see "Installing the Processor Air Duct" on page 29. 14. Install the server system cover. For instructions service
  • Intel SR1520MLNA | User Guide - Page 71
    and unplug all peripheral devices and the AC power cable. 3. Remove the server system cover. For instructions, see "Removing the Server System Cover" on page 14. 4. Remove the power supply cables from which server board. See letter "C" in the figure. Intel® Server System SR1520ML User's Guide 51
  • Intel SR1520MLNA | User Guide - Page 72
    forward to match the screw holes in the board and system. Screw the front panel board into place. See letters "C" and "D" in the figure. 52 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 73
    into the cable harness. 15. Install the server system cover. For instructions, see "Installing the Server System Cover". 16. Plug all peripheral devices replacing the CMOS battery, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the
  • Intel SR1520MLNA | User Guide - Page 74
    customer service instructions, see "Removing the Server System Cover" on page 14. 4. Remove the server's cover and locate the battery. See Figure 43. 5. Pull back gently on the metal tab at the top of the battery. 6. Remove the battery from its socket. 54 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 75
    it in the battery socket. The "+" sign needs to face the rear of the system. 9. Install the system cover. For instructions, see "Installing the Server System Cover" on page 15. 10. Run the BIOS Setup utility to restore the configuration settings. Intel® Server System SR1520ML User's Guide 55
  • Intel SR1520MLNA | User Guide - Page 76
    the Rack Handle 4. Repeat step 3 on the opposite side of the server. 5. Plug all peripheral devices and the AC power cable into the server. 56 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 77
    . Removing the Rack Handle 4. Repeat step 3 on the opposite side of the system. 5. Plug all peripheral devices and the AC power cable into the server. Intel® Server System SR1520ML User's Guide 57
  • Intel SR1520MLNA | User Guide - Page 78
    58 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 79
    you are not able to access BIOS Setup, you might need to clear the CMOS memory. For instructions on clearing the CMOS, see "Clearing the CMOS". Setup Menus Each BIOS Setup menu page contains a for any reason, the feature's value field is inaccessible. Intel® Server System SR1520ML User's Guide 59
  • Intel SR1520MLNA | User Guide - Page 80
    if the key is pressed, the user is returned to where they were before was pressed without affecting any existing field values. 60 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 81
    process may need to be followed to return the system to service. See Table 1 on page xix for a link to necessary software and instructions. Recording the Current BIOS Settings 1. Boot the computer and press your computer at the end of the procedure. Intel® Server System SR1520ML User's Guide 61
  • Intel SR1520MLNA | User Guide - Page 82
    xix for a link to the update software. Note: Review the instructions and release notes that are provided in the readme file distributed with Note: You may encounter a CMOS Checksum error or other problem after reboot. If this happens, shut down the system Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 83
    Recovery Mode jumper to the default position, covering pins 1 and 2. 10. Close the server chassis. 11. Reconnect the AC power and power up the server. Intel® Server System SR1520ML User's Guide 63
  • Intel SR1520MLNA | User Guide - Page 84
    . 5. Power down the system and disconnect the AC power. 6. Return the J6B1 Password Clear jumper to the Password Clear Protect position, covering pins 1 and 2. 64 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 85
    in Clear CMOS Position 4. Reconnect the AC power, power up the system. 5. When the system begins beeping, power it down and disconnect the AC power. Intel® Server System SR1520ML User's Guide 65
  • Intel SR1520MLNA | User Guide - Page 86
    Force Update jumper from the default position, covering pins 1 and 2 to the Write Enable position, covering pins 2 and 3 as indicated in the following diagram. 66 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 87
    only be used when the standard firmware update process fails. This jumper should remain in the default, disabled position when the server is running normally. Intel® Server System SR1520ML User's Guide 67
  • Intel SR1520MLNA | User Guide - Page 88
    . iBMC Boot Block Write Protect Jumper (J1A4) 4. Close the server system and reconnect AC power and power up the server and complete the update. 68 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 89
    and inoperable. For this reason jumper protection is applied to this area of the flash so a user does not mistakenly write to this boot block. Intel® Server System SR1520ML User's Guide 69
  • Intel SR1520MLNA | User Guide - Page 90
    70 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 91
    cables or wires are pinched and that the airflow from the fans is not blocked. Use the figures below to determine the correct cable routing. Intel® Server System SR1520ML User's Guide 71
  • Intel SR1520MLNA | User Guide - Page 92
    power (one for each server board) D. Drive power. Daisy cable (one connection to power a drive for each server board) Figure 51. Power Cable Routing 72 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 93
    board). B. SATA to hard drive (one for each server board). C. Y-Front panel cable. One end attaches to each server board. Figure 52. Data Cable Routing Intel® Server System SR1520ML User's Guide 73
  • Intel SR1520MLNA | User Guide - Page 94
    Watts for the +5 V and +3.3 V outputs. Exceeding a combined 90 Watts will overload the power subsystem and may cause the power supply to overheat and malfunction. 74 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 95
    power for a typical office ambient temperature (65-75 °F). Your selection of peripherals may change the noise level. Tested to 15 kilovolts (kV); no component damage. Intel® Server System SR1520ML User's Guide 75
  • Intel SR1520MLNA | User Guide - Page 96
    76 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 97
    Appendix B: Installation/Assembly Safety Instructions English The power supply in this product contains no user-serviceable parts. Refer servicing only to qualified personnel. Do not attempt to not operate the system with the chassis covers removed. Intel® Server System SR1520ML User's Guide 77
  • Intel SR1520MLNA | User Guide - Page 98
    type recommended by the equipment manufacturer. Dispose of used batteries according to manufacturer's instructions. The system is designed to operate in a typical office environment. Choose a because they serve as the product's main power disconnect. 78 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 99
    , um elektrostatische Ladungen (ESD) über blanke Metallstellen bei der Handhabung der Komponenten zu vermeiden. 6. Schalten Sie das System niemals ohne ordnungsgemäß montiertes Gehäuse ein. Intel® Server System SR1520ML User's Guide 79
  • Intel SR1520MLNA | User Guide - Page 100
    . Die Batterie darf nur durch denselben oder einen entsprechenden, vom Hersteller empfohlenen Batterietyp ersetzt werden. Entsorgen Sie verbrauchte Batterien den Anweisungen des Herstellers entsprechend. 80 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 101
    panneau avant n'éteint pas l'alimentation CA du système. Pour mettre le système hors tension, vous devez débrancher chaque câble d'alimentation de sa prise. Intel® Server System SR1520ML User's Guide 81
  • Intel SR1520MLNA | User Guide - Page 102
    a été sous tension. Faites également attention aux broches aiguës des cartes et aux bords tranchants du capot. Nous vous recommandons l'usage de gants de protection. 82 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 103
    type ou d'un type équivalent recommandé par le fabricant. Disposez des piles usées selon les instructions du fabricant. Le système a été conçu pour fonctionner dans un cadre de travail normal. L' alimentación de corriente alterna que tenga el producto Intel® Server System SR1520ML User's Guide 83
  • Intel SR1520MLNA | User Guide - Page 104
    sistema y bloquéelo para impedir que pueda accederse al mismo sin autorización. 5. Conecte todos los cables externos y los cables de alimentación CA al sistema. 84 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 105
    tierra correctamente instalada. • "Provisto de espacio suficiente como para acceder a los cables de alimentación, ya que éstos hacen de medio principal de desconexión del sistema. Intel® Server System SR1520ML User's Guide 85
  • Intel SR1520MLNA | User Guide - Page 106
    lucchetto dal retro del sistema qualora ve ne fosse uno installato. 2. Togliere e mettere in un posto sicuro tutte le viti delle coperture. 3. Togliere le coperture. Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 107
    di una presa a muro correttamente installata. • "Dotata di spazio sufficiente ad accedere ai cavi di alimentazione, i quali rappresentano il mezzo principale di scollegamento del sistema. Intel® Server System SR1520ML User's Guide 87
  • Intel SR1520MLNA | User Guide - Page 108
    88 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 109
    , such as video drivers, network drivers, and SATA drivers. Intel provides a package called the "Platform Confidence Test" that may help with your diagnostics. See "Server System References" on page xix for a link to this software. If you are unable to resolve your server problems on your own, see
  • Intel SR1520MLNA | User Guide - Page 110
    supported hardware and operating system list. See "Server System References" on page xix for links to the tested component lists. Hardware Diagnostic Testing This section provides a more detailed approach to identifying a hardware problem and locating its source. 90 Intel® Server System SR1520ML
  • Intel SR1520MLNA | User Guide - Page 111
    drive activity light does not light. • Hard disk drive activity light does not light. • USB CD-ROM drive activity light does not light. • There are problems with application software. • The bootable USB CD-ROM is not detected. Intel® Server System SR1520ML User's Guide 91
  • Intel SR1520MLNA | User Guide - Page 112
    order given. If you cannot correct the problem, contact your service representative or authorized dealer for help. re-seat them. • Make sure the processor complies with the system requirements. • Remove the processor and re-seat it. No Characters Appear 92 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 113
    processor(s) comply with the system requirements. • Make sure the processor(s) have been populated according to the system requirements. • Remove the processor you hear. This information is useful for your service representative. 5. If you do not receive Intel® Server System SR1520ML User's Guide 93
  • Intel SR1520MLNA | User Guide - Page 114
    sure you are using the correct and the current drivers. See "Server System References" on page xix for a link to the current drivers. • Make sure the driver is loaded and the protocols are bound. • the network controller LEDs next to the NIC connectors. 94 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 115
    supports shared interrupts. • Try reseating the add-in adapter. The add-in adapter stopped working without apparent cause • Reseat the adater. • The network driver files may be corrupt or deleted. Delete and then reinstall the drivers from the server. Intel® Server System SR1520ML User's Guide 95
  • Intel SR1520MLNA | User Guide - Page 116
    the correct device drivers installed. If the problems persist, contact the software vendor's customer service representative. Problems with Application Software that Ran Correctly Earlier Problems that occur the power outlet and the system power cord. 96 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 117
    not include all of the drivers for the Intel® chipsets, onboard NICs, and other components. See "Server System References" on page xix for a link to the current drivers and chipset files. Hard Drive allow the USB CD-ROM to be the first bootable device. Intel® Server System SR1520ML User's Guide 97
  • Intel SR1520MLNA | User Guide - Page 118
    98 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 119
    support.intel.com/support/ motherboards/server/X38ML. For an updated support contact list, see http://www.intel.com/support/9089.htm/ U.S. and Canada See http://support.intel.com/support/motherboards 91 377 8166 Sweden....... 08 445 1251 UK 870 6072439 Intel® Server System SR1520ML User's Guide 99
  • Intel SR1520MLNA | User Guide - Page 120
    8 621 33104691 (not toll-free) Hong Kong 852 2 844 4456 India........... 0006517 2 68303634 (manual toll-free. You need an IDD-equipped telephone) Indonesia ... 803 65 7249 Korea ......... 822 767 2595 800 225 288. Once connected, dial 800 843 4481 100 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 121
    0114 Peru 001 916 377 0114 Uruguay..... 001 916 377 0114 Venezuela... Contact AT&T USA at 0 800 2255 288. Once connected, dial 800 843 4481 Intel® Server System SR1520ML User's Guide 101
  • Intel SR1520MLNA | User Guide - Page 122
    102 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 123
    the Product with another Product; OR • REFUND the then-current value of the Product if Intel is unable to repair or replace the Product. If such Product is defective, transportation charges for Current characterized errata are available upon request. Intel® Server System SR1520ML User's Guide 103
  • Intel SR1520MLNA | User Guide - Page 124
    damages due to external causes, including accident, problems with electrical power, usage not in accordance with product instructions, misuse, neglect, alteration, repair, improper this Limited Warranty, the English language version shall control. 104 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 125
    for the product, please go to the following Web site to obtain instructions: http://support.intel.com/support/ motherboards/draform.htm • In Europe and in Asia Contact your original authorized distributor for warranty service. Any replacement Product is warranted under this written warranty and is
  • Intel SR1520MLNA | User Guide - Page 126
    106 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 127
    serviced only by technically qualified persons. You must adhere to the guidelines in this guide and the assembly instructions in your server manuals serious injury or death if safety instructions are not followed. Indicates hot components or surfaces. Intel® Server System SR1520ML User's Guide 107
  • Intel SR1520MLNA | User Guide - Page 128
    . • Use mechanical assistance or other suitable assistance when moving and lifting equipment. • To reduce the weight for easier handling, remove any easily detachable components. 108 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 129
    supplies that use Neutral Pole Fusing. The power supply in this product contains no user-serviceable parts. Do not open the power supply. Hazardous voltage, current and energy levels are -outlet(s) that is /are provided with a suitable earth ground. Intel® Server System SR1520ML User's Guide 109
  • Intel SR1520MLNA | User Guide - Page 130
    serviceable parts in the power supply. Return to manufacturer for servicing has been running, any installed processor(s) and heat sink(s) may anchored to an unmovable support to prevent it from to the rack manufacturer's instructions. Install equipment in the Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 131
    to minimize airflow blockage and cooling problems. For proper cooling and airflow, the covers to the chassis according to the product instructions. Laser Peripherals or Devices Caution: To avoid risk serviceable. • Return to manufacturer for servicing. Intel® Server System SR1520ML User's Guide 111
  • Intel SR1520MLNA | User Guide - Page 132
    von Geräten. Lesen Sie diese Dokument daher sorgfältig, bevor Sie Ihr Intel® Serverprodukt installieren oder warten. Bei Widersprüchen zwischen den hier vorliegenden Angaben und auf Verbrennungsgefahr an heißen Bauteilen bzw. Oberflächen hin. 112 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 133
    Transportieren oder Anheben von Geräten. • Entfernen Sie alle Komponenten, die sich leicht abnehmen lassen, um das Gewicht zu reduzieren und die Handhabung zu erleichtern. Intel® Server System SR1520ML User's Guide 113
  • Intel SR1520MLNA | User Guide - Page 134
    muß über ein eigenes Netzkabel angeschlossen werden. Einige Netzteile von Intel Servern verwenden Nullleitersicherungen. Vorsicht ist geboten im Umgang mit Netzteilen, . • Netzkabel müssen an eine ordnungsgemäß geerdete Steckdose angeschlossen sein. 114 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 135
    vor, und bauen Sie das schwerste Gerät an der untersten Position im Rack ein. Ziehen Sie jeweils immer nur ein Gerät aus dem Rack heraus. Intel® Server System SR1520ML User's Guide 115
  • Intel SR1520MLNA | User Guide - Page 136
    führen. So bringen Sie die Abdeckung wieder an: • Vergewissern Sie sich zunächst, daß Sie keine Werkzeuge oder Teile im Gehäuse vergessen haben. 116 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 137
    uniquement par des techniciens qualifiés. Vous devez suivre les informations de ce guide et les instructions d'assemblage des manuels de serveur pour vérifier et maintenir la conformité et peuvent figurer sur le produit ou sur son emballage. Intel® Server System SR1520ML User's Guide 117
  • Intel SR1520MLNA | User Guide - Page 138
    soleil et les radiateurs. • À l'écart des sources de vibration ou des chocs physiques. • Isolé des champs électromagnétiques importants produits par des appareils électriques. 118 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 139
    ou de supprimer un composant non connectable à chaud. Les alimentations de certains serveurs Intel sont munies de doubles fusibles pôle/neutre: veuillez observer les précautions d'usage afin d'alimentation. L'intérieur de celui-ci est soumis à des Intel® Server System SR1520ML User's Guide 119
  • Intel SR1520MLNA | User Guide - Page 140
    Les cordons d'alimentation doivent répondre aux critères suivants : - Le cordon d'alimentation doit supporter une intensité supérieure à celle indiquée sur le produit. - Le cordon d'alimentation doit télécommunication qui sont connectés au système. 120 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 141
    le montage en rack Le rack doit être fixé à un support inamovible pour éviter qu'il ne bascule lors de l'extension d' l'équipement. Le rack doit être installé conformément aux instructions du fabricant. Installez les équipements dans le rack en partant Intel® Server System SR1520ML User's Guide 121
  • Intel SR1520MLNA | User Guide - Page 142
    système. • Vérifiez que les câbles, les cartes d'extension et les autres composants sont correctement installés. • Fixez les panneaux au châssis en suivant les instructions du produit. 122 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 143
    irse a las directrices de esta guía y a las instrucciones de montaje de los manuales del servidor para asegurar y mantener el cumplimiento con las certificaciones y homologaciones existentes de los graves si no se tiene en cuenta la ADVERTENCIA. Intel® Server System SR1520ML User's Guide 123
  • Intel SR1520MLNA | User Guide - Page 144
    conectada a tierra. • Provista de espacio suficiente para acceder a los cables de la fuente de alimentación ya que constituyen la desconexión principal de la alimentación. 124 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 145
    conexión en funcionamiento. Algunas fuentes de alimentación de electricidad de los servidores de Intel utilizan el polo neutral del fuselaje. Para evitar riesgos de choques electricos use precaució , adquiera alguno cuyo uso esté aprobado en su país. Intel® Server System SR1520ML User's Guide 125
  • Intel SR1520MLNA | User Guide - Page 146
    para repararla. • Apague el servidor y desconecte todos los cables de alimentación antes de agregar o reemplazar cualquier componente que no es de conexión en funcionamiento. 126 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 147
    los componentes que estén calientes cuando esté realizando una instalación de conexión en funcionamiento, tenga cuidado al extraer o instalar los componentes de conexión en funcionamiento. Intel® Server System SR1520ML User's Guide 127
  • Intel SR1520MLNA | User Guide - Page 148
    servidor, colóquela con el lado de los componentes hacia arriba sobre una superficie con toma de tierra y sin carga estática. Utilice una 128 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 149
    caja de ningún periférico o dispositivo láser • Los periféricos o dispositivos láser no pueden ser reparados por el usuario • Haga que el fabricante los repare Intel® Server System SR1520ML User's Guide 129
  • Intel SR1520MLNA | User Guide - Page 150
    130 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 151
    ensure regulatory compliance, you must adhere to the assembly instructions in this guide to ensure and maintain compliance with existing product certifications and : • UL60950 - CSA 60950 (USA / Canada) • EN60950 (Europe) • IEC60950 (International) Intel® Server System SR1520ML User's Guide 131
  • Intel SR1520MLNA | User Guide - Page 152
    Emissions (Russia) • GOST R 50628-95 Immunity (Russia) • Belarus License (Belarus) • Ukraine License (Ukraine) • RRL MIC Notice No. 1997-41 (EMC) & 1997-42 (EMI) (Korea) 132 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 153
    Markings This Intel® server system product is provided with the following regulatory marks. Table 8. Product Regulatory Compliance Markings Regulatory Compliance IRAM Mark Region Argentina Marking cULus Listing Marks USA/Canada GS Mark Germany Intel® Server System SR1520ML User's Guide 133
  • Intel SR1520MLNA | User Guide - Page 154
    (Class A) Canada C-Tick Mark Australia / New Zealand VCCI Marking (Class A) Japan BSMI Certification Number & Class A Warning Taiwan GOST R Marking RRL MIC Mark Russia Korea 134 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 155
    of Regulations, Title 22, Division 4.5, Chapter 33: Best Management Practices for Perchlorate Materials. This product / part includes a battery which contains Perchlorate material. Made in XXXX Intel® Server System SR1520ML User's Guide 135
  • Intel SR1520MLNA | User Guide - Page 156
    related to the EMC performance of this product, contact: Intel Corporation 5200 N.E. Elam Young Parkway Hillsboro, OR 97124-6497 if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 157
    receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual. BSMI (Taiwan) The BSMI Certification Marking and EMC warning is located on the outside rear area of the product. Intel® Server System SR1520ML User's Guide 137
  • Intel SR1520MLNA | User Guide - Page 158
    If you do not have access to Intel's Web address, please contact your local Intel representative. • Server Chassis: (base chassis is provided with power supply and fans) - UL listed. • Server board: you must use an Intel server board - UL recognized. 138 Intel® Server System SR1520ML User's Guide
  • Intel SR1520MLNA | User Guide - Page 159
    not to exceed the maximum loading conditions of the power supply. Product Ecology Requirements Intel has a system in place to restrict the use of banned substances in accordance with PC/ABS< • EU Packaging Directive • German Green Dot • Japan Recycling Intel® Server System SR1520ML User's Guide 139
  • Intel SR1520MLNA | User Guide - Page 160
    End-of-Life / Product Recycling Product recycling and end-of-life take-back systems and requirements vary by country. Contact the retailer or distributor of this product for information about product recycling and / or take-back. 140 Intel® Server System SR1520ML User's Guide
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
Intel
®
Server System SR1520ML
User’s Guide
A Guide for Technically Qualified Assemblers of Intel® Identified Subassemblies/
Products
Intel Order Number E17409-00
4