Intel W2600CR Technical Product Specification

Intel W2600CR Manual

Intel W2600CR manual content summary:

  • Intel W2600CR | Technical Product Specification - Page 1
    Intel® Server System P4000IP and Intel® Workstation System P4000CR Family Technical Product Specification Intel reference number G38159-001 Revision 1.0 February, 2012 Enterprise Platforms and Services Marketing
  • Intel W2600CR | Technical Product Specification - Page 2
    from published specifications. Current characterized errata are available on request. Intel Corporation server baseboards contain a number of high-density VLSI and power delivery components that need adequate airflow to cool. Intel‟s own chassis are designed and tested to meet the intended thermal
  • Intel W2600CR | Technical Product Specification - Page 3
    Functionality 16 1.3.2 Front Control Panel LED Status 18 1.4 Back panel feature Overveiw 19 1.5 Hot swap Hard Drivers and front panel options 20 1.6 Chassis Security 20 1.7 Front Bezel Features 21 2. System Power Sub-system 23 2.1 750-W Power Supply 23 2.1.1 Mechanical Overview
  • Intel W2600CR | Technical Product Specification - Page 4
    ® Server System P4000IP and Intel® Workstation System P4000CR Family TPS 2.2 1200-W Power Supply 36 2.2.1 Mechanical Overview 36 2.2.2 AC Input Requirements 39 2.2.3 Efficiency...41 2.2.4 DC Output Specification 41 2.2.5 Protection Circuits 45 2.2.6 Control and Indicator Functions 46
  • Intel W2600CR | Technical Product Specification - Page 5
    Intel® Workstation System P4000CR Family TPS Table of Contents 3.5 Fan Header Connector Descriptions 80 4. Storage and Peripheral Drive Bays 81 4.1 2.5‟„ Hard Disk Drive Support 81 4.1.1 2.5'' Drive Hot-Swap Backplane Overview 82 4.1.2 Cypress* CY8C22545 Enclosure Management Controller
  • Intel W2600CR | Technical Product Specification - Page 6
    12 Figure 8. Internal Chassis View of Intel® Workstation System P4304CR2LFGN 13 Figure 9. Internal Chassis View of Intel® Workstation System P4304CR2LFJN 14 Figure 10. Internal Chassis View of Intel® Workstation System P4304CR2LFKN 15 Figure 11. Front Control Panel LED/Button Arragement
  • Intel W2600CR | Technical Product Specification - Page 7
    P4000IP and Intel® Workstation System P4000CR Family TPS List of Figures Figure 32. Fixed Fans in Intel® Workstation System P4000CR 79 Figure 33. Hot-swap Fans in Intel® Server System P4000IP 80 Figure 34. 2.5'' Hard Disk Drive Cage 81 Figure 35. 2.5'' Hard Disk Drive Support - LED Status
  • Intel W2600CR | Technical Product Specification - Page 8
    Table 3. Intel® Workstation System P4000CR Fixed 3.5 HDDs configuration base feature ........4 Table 4. Power/Sleep LED Functional States 17 Table 5. Front Control Panel LED Status 18 Table 6. DC Output Connector 23 Table 7. LED Characteristics ...24 Table 8. Power Supply LED Functionality
  • Intel W2600CR | Technical Product Specification - Page 9
    ® Server System P4000IP and Intel® Workstation System P4000CR Family TPS List of Tables Table 32. AC Line Sag Transient Performance 41 Table 33. AC Line 1600W PSU 60 Table 64 PSON# Signal Characteristic 60 Table 65 PWOK Signal Characteristics 61 Revision 1.0 Intel order number G38159-001 ix
  • Intel W2600CR | Technical Product Specification - Page 10
    and Intel® Workstation System P4000CR Family TPS Table 66 SMBAlert# Signal Characteristics 62 Table 67. Thermal Requirements 65 Table 68. Input Connector and Pin Assignment Diagrams 66 Table 69. PDB Cable Length ...66 Table 70. P1 Baseboard Power Connector 67 Table 71. P0 Processor Power
  • Intel W2600CR | Technical Product Specification - Page 11
    Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS List of Tables Revision 1.0 Intel order number G38159-001 xi
  • Intel W2600CR | Technical Product Specification - Page 12
  • Intel W2600CR | Technical Product Specification - Page 13
    drive, EMI shield, 5.25'' bay filler  Pre-routing cables  Two heat sinks Your Intel® Workstation System P4304CR2LFKN ships with the following items:  One Intel® Workstation Board W2600CR2  One CRPS 1600W power supply, installed in the chassis  One fixed system CPU zone fan, installed in the
  • Intel W2600CR | Technical Product Specification - Page 14
    P4000IP and Intel® Workstation System P4000CR Family TPS Intel® Server System P4000IP and Intel® Workstation System Overview Your Intel® Server System P4216IP4LHJC ships with the following items:  One Intel® Server Board S2600IP4  Two CRPS 1200W power supply, installed in the chassis  Five hot
  • Intel W2600CR | Technical Product Specification - Page 15
    P4000IP and Intel® Workstation System P4000CR Family TPS Intel® Server System P4000IP and Intel® Workstation System Overview Your Intel® Server System P4216IP4LHKC ships with the following items:  One Intel® Server Board S2600IP  Two CRPS 1600W power supply, installed in the chassis  Five hot
  • Intel W2600CR | Technical Product Specification - Page 16
    (depending on server/workstation board)  One rear panel video port  Two hot-swap 1600W common redundant power supply Table 3. Intel® Workstation System P4000CR Fixed 3.5 HDDs configuration base feature Feature Dimensions Hard Drives Peripherals Control Panel (dependent on P4304CR2LFGN
  • Intel W2600CR | Technical Product Specification - Page 17
    System P4000IP and Intel® Workstation System P4000CR Family TPS Intel® Server System P4000IP and Intel® Workstation System Overview Feature option selected) LEDs and displays (dependent on option selected) Power Supply Fans USB 2.0 and USB 3.0 Video P4304CR2LFGN P4304CR2LFJN(L)  With
  • Intel W2600CR | Technical Product Specification - Page 18
    P4000CR Family TPS Intel® Server System P4000IP and Intel® Workstation System Overview 1.1.1 Intel® Server System P4208IP4LHGC View A. 750W CRPS Power supply B. AC Input Power connecotor C. I/O ports D. Serial port knockout E. A Kensington cable lock mounting hole F. PCI Add-in card slot covers
  • Intel W2600CR | Technical Product Specification - Page 19
    P4000CR Family TPS Intel® Server System P4000IP and Intel® Workstation System Overview 1.1.2 Intel® Server System P4216IP4LHJC View A. 1200W CRPS Power supply B. AC Input Power connecotor C. I/O ports D. Serial port knockout E. A Kensington cable lock mounting hole F. PCI Add-in card slot covers
  • Intel W2600CR | Technical Product Specification - Page 20
    P4000CR Family TPS Intel® Server System P4000IP and Intel® Workstation System Overview 1.1.3 Intel® Server System P4216IP4LHKC View A. 1600W CRPS Power supply B. AC Input Power connecotor C. I/O ports D. Serial port knockout E. A Kensington cable lock mounting hole F. PCI Add-in card slot covers
  • Intel W2600CR | Technical Product Specification - Page 21
    P4000CR Family TPS Intel® Server System P4000IP and Intel® Workstation System Overview 1.1.4 Intel® Server System P4224IP4LHKC View A. 1600W CRPS Power supply B. AC Input Power connecotor C. I/O ports D. Serial port knockout E. A Kensington cable lock mounting hole F. PCI Add-in card slot covers
  • Intel W2600CR | Technical Product Specification - Page 22
    P4000CR Family TPS Intel® Server System P4000IP and Intel® Workstation System Overview 1.1.5 Intel® Server System P4308IP4LHGC View A. 750W CRPS Power supply B. AC Input Power connecotor C. I/O ports D. Serial port knockout E. A Kensington cable lock mounting hole F. PCI Add-in card slot covers
  • Intel W2600CR | Technical Product Specification - Page 23
    Family TPS Intel® Server System P4000IP and Intel® Workstation System Overview 1.1.6 Intel® Server System P4308IP4LHJC(L) View A. 1200W CRPS Power supply B. AC Input Power connecotor C. I/O ports D. Serial port knockout E. A Kensington cable lock mounting hole F. PCI Add-in card slot covers
  • Intel W2600CR | Technical Product Specification - Page 24
    P4000CR Family TPS Intel® Server System P4000IP and Intel® Workstation System Overview 1.1.7 Intel® Server System P4308IP4LHKC View A. 1600W CRPS Power supply B. AC Input Power connecotor C. I/O ports D. Serial port knockout E. A Kensington cable lock mounting hole F. PCI Add-in card slot covers
  • Intel W2600CR | Technical Product Specification - Page 25
    Family TPS Intel® Server System P4000IP and Intel® Workstation System Overview 1.1.8 Intel® Workstation System P4304CR2LFGN View A. 750W CRPS Power supply B. AC Input Power connecotor C. I/O ports D. Serial port knockout E. A Kensington cable lock mounting hole F. PCI Add-in card slot covers
  • Intel W2600CR | Technical Product Specification - Page 26
    Family TPS Intel® Server System P4000IP and Intel® Workstation System Overview 1.1.9 Intel® Workstation System P4304CR2LFJN(L) View A. 1200W CRPS Power supply B. AC Input Power connecotor C. I/O ports D. Serial port knockout E. A Kensington cable lock mounting hole F. PCI Add-in card slot covers
  • Intel W2600CR | Technical Product Specification - Page 27
    Family TPS Intel® Server System P4000IP and Intel® Workstation System Overview 1.1.10 Intel® Workstation System P4304CR2LFKN View A. 1600W CRPS Power supply B. AC Input Power connecotor C. I/O ports D. Serial port knockout E. A Kensington cable lock mounting hole F. PCI Add-in card slot covers
  • Intel W2600CR | Technical Product Specification - Page 28
    ® Server System P4000IP and Intel® Workstation System P4000CR Family TPS Intel® Server System P4000IP and Intel® Workstation System Overview 1.2 Chassis dimensions Length: 656 mm (without bezel) 698.3 mm (with bezel) Height: 438 mm Width: 173 mm 1.3 Front control panel feature Overview This
  • Intel W2600CR | Technical Product Specification - Page 29
    ® Server System P4000IP and Intel® Workstation System P4000CR Family TPS Intel® Server System P4000IP and Intel® Workstation System Overview ID Button with integrated ID LED - Toggles the integrated ID LED and the Blue server board ID LED on and off. The ID LED is used to identify the system for
  • Intel W2600CR | Technical Product Specification - Page 30
    System P4000IP and Intel® Workstation System P4000CR Family TPS Intel® Server System P4000IP and Intel® Workstation System Overview USB Ports - In addition, the front panel provides two USB ports. The USB ports are cabled to the 2x5 connector on the server board. 1.3.2 Front Control Panel LED
  • Intel W2600CR | Technical Product Specification - Page 31
    and Intel® Workstation System P4000CR Family TPS Intel® Server System P4000IP and Intel® Workstation System Overview 1.4 Back panel feature Overveiw A CRPS Power supply B AC Input Power connecotor C I/O ports D Serial port knockout E A Kensington cable lock mounting hole F PCI Add-in card slot
  • Intel W2600CR | Technical Product Specification - Page 32
    chassis. Note: See the technical product specificationappropriate to the server board and System Service Guide for a description of BIOS and management security features for each specific supported platform. Technical product specifications can be found at http://www.intel.com/support. 20 Intel
  • Intel W2600CR | Technical Product Specification - Page 33
    P4000CR Family TPS Intel® Server System P4000IP and Intel® Workstation System Overview 1.7 Front Bezel Features There are two type of front bezel assembly. 1. Front bezel assembly for fixed hard drives configuration on Intel® Workstation System P4000CR. Figure 14. Front Closed Chassis View for
  • Intel W2600CR | Technical Product Specification - Page 34
    ® Server System P4000IP and Intel® Workstation System P4000CR Family TPS Intel® Server System P4000IP and Intel® Workstation System Overview only be removed by first removing the server access cover. This provides additional security to the hard drive and peripheral bay area. For
  • Intel W2600CR | Technical Product Specification - Page 35
    System Power Sub-system Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS 2. System Power Sub-system 2.1 750-W Power Supply This specification defines a 750W redundant power supply that supports server systems. This power supply has 2 outputs; 12V and 12V standby.
  • Intel W2600CR | Technical Product Specification - Page 36
    P4000IP and Intel® Workstation System P4000CR Family TPS System Power Sub-system Pin A6 A7 power supply has a latch which retains the power supply into the system and prevents the power supply from being inserted or extracted from the system when the AC power cord is pulled into the power supply
  • Intel W2600CR | Technical Product Specification - Page 37
    Intel® Workstation System P4000CR Family TPS Power Supply Condition Output ON and OK No AC power to all power supplies AC present/Only 12VSB on (PS off) or PS in Cold redundant state AC cord unplugged or AC power lost; with a second power supply in parallel still with AC input power. Power supply
  • Intel W2600CR | Technical Product Specification - Page 38
    System P4000IP and Intel® Workstation System P4000CR Family TPS System Power Sub-system Output power Power factor Table 10. Power Factor Requirements for the power supply meets dynamic voltage regulation requirements. An AC line dropout of any duration does not cause tripping of control signals
  • Intel W2600CR | Technical Product Specification - Page 39
    System Power Sub-system Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS 2.1.2.5 AC Line 12VSBHoldup The 12VSB output voltage stays in regulation under its full load (static or dynamic) during an AC dropout of 70ms min (=12VSB holdup time) whether the power supply is
  • Intel W2600CR | Technical Product Specification - Page 40
    System P4000IP and Intel® Workstation System P4000CR Family TPS System Power Sub-system 2.1.3 Efficiency 12Vstby must provide 4.0A with two power supplies in parallel. The Fan may work when stby current >1.5A Length of time peak power can be supported is based on thermal sensor and assertion
  • Intel W2600CR | Technical Product Specification - Page 41
    System Power Sub-system Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS Parameter +12V +12V stby Table 17. Voltage to chassis does not exceed 1.0 m. This path may be used to carry DC current. 2.1.4.8 Residual Voltage Immunity in Standby mode The power supply
  • Intel W2600CR | Technical Product Specification - Page 42
    ® Server System P4000IP and Intel® Workstation System P4000CR Family TPS System Power Sub-system The residual voltage at the power supply outputs for no load condition does not exceed 100mV when AC voltage is applied and the PSON# signal is de-asserted. 2.1.4.9 Common Mode Noise The
  • Intel W2600CR | Technical Product Specification - Page 43
    System Power Sub-system Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS VOUT AC HOT POWER SUPPLY AC NEUTRAL VRETURN 10uF .1uF LOAD LOAD MUST BE ISOLATED FROM THE GROUND OF THE POWER SUPPLY AC GROUND GENERAL NOTES: 1. LOAD THE OUTPUT WITH ITS MINIMUM LOAD
  • Intel W2600CR | Technical Product Specification - Page 44
    Server System P4000IP and Intel® Workstation System P4000CR Family TPS System Power Sub-system Item Tsb_vout a PSON# cycle HIGH for 1sec is able to reset the power supply. 2.1.5.1 Current Limit (OCP) The power supply has current limit to prevent the outputs from exceeding the values
  • Intel W2600CR | Technical Product Specification - Page 45
    System P4000IP and Intel® Workstation System P4000CR Family TPS Output VOLTAGE +12V 12VSB Table 22. Over Current Protection Input voltage range 90 - 264VAC 90 - 264VAC Over Current Limits 72A min; 78A max 2.5A min; 3.5A max 2.1.5.2 Over Voltage Protection (OVP) The power supply over voltage
  • Intel W2600CR | Technical Product Specification - Page 46
    Server System P4000IP and Intel® Workstation System P4000CR Family TPS System Power Sub-system Signal Type Logic level low (power supply ON) Logic level high (power supply OFF) Source current, Vpson = low Power up delay: Tpson_on_delay PWOK delay: Tpson_pwok Accepts an open collector/drain input
  • Intel W2600CR | Technical Product Specification - Page 47
    Power Sub-system Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS Signal Type PWOK rise and fall time Power down delay: Tpwok_off Open collector/drain output from power supply. Pull-up to VSB located in the power supply the power supply is experiencing a problem that
  • Intel W2600CR | Technical Product Specification - Page 48
    ® Server System P4000IP and Intel® Workstation System P4000CR Family TPS System Power Sub-system 2.1.9 Firmware Uploader The power supply has the capability to update its firmware from the PMBus interface while it is in standby mode. This FW can be updated when in the system and in standby mode
  • Intel W2600CR | Technical Product Specification - Page 49
    System Power Sub-system Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS Table 27. DC Output specifications mentioned in the Intel® Common Hardware and Firmware Requirements for CRPS Power Supplier. 2.2.1.2 Handle Retention The power supply shall have a handle to
  • Intel W2600CR | Technical Product Specification - Page 50
    ® Server System P4000IP and Intel® Workstation System P4000CR Family TPS System Power Sub-system which retains the power supply into the system and prevents the power supply from being inserted or extracted from the system when the AC power cord is pulled into the power supply. The handle shall
  • Intel W2600CR | Technical Product Specification - Page 51
    System Power Sub-system Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS Item Top_rackped_ 3000 Description Operating time only". 2.2.2 AC Input Requirements 2.2.2.1 Power Factor The power supply must meet the power factor requirements stated in the Energy Star®
  • Intel W2600CR | Technical Product Specification - Page 52
    ® Server System P4000IP and Intel® Workstation System P4000CR Family TPS System Power Sub-system Voltage (110) an AC dropout the power supply must meet dynamic voltage regulation requirements. An AC line dropout of any duration shall not cause tripping of control signals or protection circuits.
  • Intel W2600CR | Technical Product Specification - Page 53
    System Power Sub-system Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS Duration 0 to 1/2 AC cycle > 1 AC the proportional loading method defined by 80 Plus in Generalized Internal Power Supply Efficiency Testing Protocol, Rev 6.4.3. This is posted at http://
  • Intel W2600CR | Technical Product Specification - Page 54
    ® Server System P4000IP and Intel® Workstation System P4000CR Family TPS System Power Sub-system Table 35. Minimum Load Ratings Parameter Min Max. Peak 2, 3 Unit 12V main (200240VAC) 0.0 100 133 A 12V main (100127VAC) 0.0 83 12Vstby 1 0.0 3 110 A 3.5 A Notes: 1. 2. 12Vstby
  • Intel W2600CR | Technical Product Specification - Page 55
    System Power Sub-system Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS Table 37. Transient Load Requirements Output  Step Load Size (See note) Load Slew Rate Test capacitive Load +12VSB 1.0A +12V 60% of max load Note: For dynamic condition +12V min loading
  • Intel W2600CR | Technical Product Specification - Page 56
    ® Server System P4000IP and Intel® Workstation System P4000CR Family TPS System Power Sub-system with the capacitive load specified. The hot swap test must be conducted when the system is operating under static, dynamic, and zero loading conditions. The power supply shall use a latching mechanism
  • Intel W2600CR | Technical Product Specification - Page 57
    System Power Sub-system Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS 2.2.4.13 Timing Requirements These are the timing requirements for the power supply operation. The output voltages must rise from 10% to within regulation limits (Tvout_rise) within 5 to 70ms.
  • Intel W2600CR | Technical Product Specification - Page 58
    ® Server System P4000IP and Intel® Workstation System P4000CR Family TPS System Power Sub-system latch off. The latch will be cleared by toggling the PSON# signal or by an AC power interruption. The power supply shall not be damaged from repeated power cycling in this condition. 12VSB will be auto
  • Intel W2600CR | Technical Product Specification - Page 59
    System Power Sub-system Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS Signal Type PSON# = Low PSON# = High or Open Logic level low (power supply ON) Logic level high (power supply OFF) Source current, Vpson = low Power up delay: Tpson_on_delay PWOK delay: T
  • Intel W2600CR | Technical Product Specification - Page 60
    P4000IP and Intel® Workstation System P4000CR Family TPS System Power Sub-system PWOK = High PWOK = Low Logic level low voltage, Isink=400uA Logic level high voltage, Isource=200A Sink current, PWOK = low Source current, PWOK = high PWOK delay: Tpwok_on PWOK rise and fall time Power down delay
  • Intel W2600CR | Technical Product Specification - Page 61
    Intel® Workstation System P4000CR Family TPS Signal Type (Active Low) Alert# = High Alert# = Low Logic level low voltage, Isink=4 mA Logic level high voltage, Isink=50 A Sink current, Alert# = low Sink current, Alert# = high Alert# rise and fall time Open collector/drain output from power supply
  • Intel W2600CR | Technical Product Specification - Page 62
    and Intel® Workstation System P4000CR Family TPS System Power Sub-system B25 A25 B1 A1 FCI 2x25 card edge connector 10035388-106 Airflow direction Retention Latch 265mm 40x56mm fan 39mm 73.5m m 8.5mm Figure 24. Power Supply Outline Drawing 2.3.1.1 DC Output Connector The power supply
  • Intel W2600CR | Technical Product Specification - Page 63
    System Power Sub-system Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS Pin Name Pin A14 +12V of the Intel Corporation Industrial designed plastic handle or equivalent Intel approved material. 2.3.1.3 LED Marking and Identification The power supply shall use
  • Intel W2600CR | Technical Product Specification - Page 64
    Intel® Workstation System P4000CR Family TPS System Power Sub-system Power Supply Condition Output ON and OK No AC power to all power supplies AC present/Only 12VSB on (PS off) or PS in Cold redundant state AC cord unplugged; with a second power supply in parallel still with AC input power. Power
  • Intel W2600CR | Technical Product Specification - Page 65
    System Power Sub-system Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS 2.3.2.2 AC Inlet Connector The AC input connector shall be an IEC 320 C-14 power inlet. This inlet is rated for 10A/250VAC. 2.3.2.3 AC Input Voltage Specification The power supply must
  • Intel W2600CR | Technical Product Specification - Page 66
    Server System P4000IP and Intel® Workstation System P4000CR Family TPS System Power Sub-system conditions. All protection circuits in the power supply shall not cause the AC fuse to blow unless a component in the power supply has failed. This includes DC output load short conditions. 2.3.2.7 AC
  • Intel W2600CR | Technical Product Specification - Page 67
    System Power Sub-system Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS 2.3.4 DC Output Specification 2.3.4.1 Output Power/Currents The following tables define the minimum power and current ratings. The power supply must meet both static and dynamic voltage
  • Intel W2600CR | Technical Product Specification - Page 68
    System P4000IP and Intel® Workstation System P4000CR Family TPS System Power Sub-system (See note 2) +12VSB 1.0A +12V 60% of max load Note: For dynamic condition +12V min loading is 1A. 0.25 A/sec 0.25 A/sec 20 F 2000 F 2.3.4.5 Capacitive Loading The power supply shall be stable
  • Intel W2600CR | Technical Product Specification - Page 69
    System Power Sub-system Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS latching mechanism to prevent insertion and extraction of the power supply when the AC power cord is inserted into the power supply. 2.3.4.10 Forced Load Sharing The +12V output will have
  • Intel W2600CR | Technical Product Specification - Page 70
    System P4000IP and Intel® Workstation System P4000CR Family TPS System Power Sub-system Note: When performing this test, the probe clips and capacitors should be located close to the load. 2.3.4.12 Timing Requirements These are the timing requirements for the power supply operation. The output
  • Intel W2600CR | Technical Product Specification - Page 71
    Power Sub-system Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS and a PSON# cycle HIGH for 1sec shall be able to reset the power supply. 2.3.5.1 Current Limit (OCP) The power supply shall have current limit to prevent the outputs from exceeding the values shown
  • Intel W2600CR | Technical Product Specification - Page 72
    Server System P4000IP and Intel® Workstation System P4000CR Family TPS System Power Sub-system output of the power supply‟s connectors. The voltage shall never exceed the maximum levels when measured at the power connectors of the power supply connector during any single point of fail. The voltage
  • Intel W2600CR | Technical Product Specification - Page 73
    System Power Sub-system Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS Disabled 0.3V ≤ Hysterisis ≤ 1.0V In 1.0-2.0V start of the PWOK delay time shall inhibited as long as any power supply output is in current limit. Table 65 PWOK Signal Characteristics Signal
  • Intel W2600CR | Technical Product Specification - Page 74
    P4000IP and Intel® Workstation System P4000CR Family TPS 3.3VSB 12V R1 10k PWOK in Q1 2N4401 R2 20 Q2 2NR43401 10k R4 820 System Power Sub-system PWOK out Figure 28. PWOK Circuit Requirement 2.3.6.3 SMBAlert# Signal This signal indicates that the power supply is experiencing a problem that
  • Intel W2600CR | Technical Product Specification - Page 75
    for detailed requirements. 2.4 Higer Current Power Common Redundant Power Distribution Board (PDB) The Power Distribution Board (PDB) for Intel® Server System P4000IP and Intel® Workstation System P4000CR supports the Common Redundant power supply in a 1+1 redundant configuration. The PDB
  • Intel W2600CR | Technical Product Specification - Page 76
    Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS 2.4.1 Mechanical Overview System Power Sub-system Figure 29. Outline Drawing 64 Intel order number G38159-001 Revision 1.0
  • Intel W2600CR | Technical Product Specification - Page 77
    System Power Sub-system Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS 2.4.1.1 Airflow Requirements The power distribution board shall get enough airflow for cooling DC/DC converters from the fans located in the Power Supply modules. Below is a basic drawing
  • Intel W2600CR | Technical Product Specification - Page 78
    ® Server System P4000IP and Intel® Workstation System P4000CR Family TPS System Power Sub-system for future 0.093'' PCBs in the system. The card edge connector has no keying features; the keying method is accomplished by the system
  • Intel W2600CR | Technical Product Specification - Page 79
    System Power Sub-system Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS From Power Supply cover exit hole Power Supply cover exit hole Power Supply cover exit hole Power Supply cover exit hole Extension from P5 Extension from P6 Power Supply cover exit hole Length,
  • Intel W2600CR | Technical Product Specification - Page 80
    System P4000IP and Intel® Workstation System P4000CR Family TPS System Power Sub-system Pin 8 9 10 11 12 Signal Crimp 44476 or equivalent Pin 1 2 3 4 Signal COM COM COM COM Table 71. P0 Processor Power Connector 18 AWG color Black Black Black Black Pin Signal 5* +12V1 6 +12V1 7 +12V1
  • Intel W2600CR | Technical Product Specification - Page 81
    System Power Sub-system Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS 2.4.2.2.5 2x2 12V connector (P12- Black 5 +12V2 Green 2 COM Black 6 +12V2 Green 2.4.2.2.6 Legacy 1x4 Peripheral Power Connectors (P7, P8, P9, P10, P11)  Connector housing: Molex* 0015
  • Intel W2600CR | Technical Product Specification - Page 82
    Intel® Workstation System P4000CR Family TPS System Power Sub-system Pin 4 5 Signal COM +12V3 Black Yellow 18 AWG Color 2.4.2.3 Grounding The ground of the pins of the PDB output connectors provides the power power supply. Table 79. Remote Sense Connection Points Converter Power supply
  • Intel W2600CR | Technical Product Specification - Page 83
    A 18 19 20 12V4 18.0A 18A 18 19 20 Note: P12 is reserved for board that needs 4 x GPU cards powered. P1 is the main 12V power for PCIe slot; but additional 12V power can be connected to P2 and/or P3. The motherboard MUST NOT short any of the 12V rails or connectors together. Revision
  • Intel W2600CR | Technical Product Specification - Page 84
    ® Server System P4000IP and Intel® Workstation System P4000CR Family TPS System Power Sub-system 2.4.2.6 Hard Drive 12V rail configuration options The below table shows the hard drive configuration options using the defined power connectors. In some cases additional converter or „Y‟ cables are
  • Intel W2600CR | Technical Product Specification - Page 85
    System Power Sub-system Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS 2.4.2.9 DC/DC 94. Table 86. Transient Load Requirements Output + 3.3VDC + 5VDC +5Vsb Max  Step Load Size 5A 5A 0.5A Max Load Slew Rate 0.25 A/s 0.25 A/s 0.25A/s Test capacitive Load 250
  • Intel W2600CR | Technical Product Specification - Page 86
    Intel® Workstation System P4000CR Family TPS System Power outputs, including ground, at the DC power connector and chassis ground (power subsystem enclosure).  The test set- AC HOT POWER SUPPLY AC NEUTRAL VRETURN 10uF .1uF LOAD LOAD MUST BE ISOLATED FROM THE GROUND OF THE POWER SUPPLY AC
  • Intel W2600CR | Technical Product Specification - Page 87
    System Power Sub-system Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS Description Output voltage rise time for Circuits The PDB shall shut down all the DC/DC converters on the PDB and the power supply (from PSON) if there is a fault condition on the PDB (OVP or OCP
  • Intel W2600CR | Technical Product Specification - Page 88
    PWOK Requirements Motherboard pull-up voltage 5V 3.3V MIN resistance value (ohms) 10K 6.8K 2.4.5 PSON Signal The PDB connects the power supplies PSON signals together and connect them to the PSON signal on P1. Refer to the CRPS power supply specification for signal details. 76 Intel order
  • Intel W2600CR | Technical Product Specification - Page 89
    System Power Sub-system Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS 2.4.6 PMBus The PDB has no components on it to support PMBus. It only needs to connect the power supply PMBus signals (clock, data, SMBAlert#) and pass them to the 1x5 signal connector. 2.4.6.1
  • Intel W2600CR | Technical Product Specification - Page 90
    Intel® Workstation System P4000CR Family TPS Thermal Management 3. Thermal Management The Intel supported supplied drive blank.  The air duct must be installed at all times.  In single power supply configurations, the second power supply bay must have the supplied processors Intel® Server Chassis
  • Intel W2600CR | Technical Product Specification - Page 91
    provide drive, processors, and memory cooling. All system fans provide a signal for RPM detection the server board can make available for server management functions. In addition, the power supply fan provides cooling for the power supply. Figure 32. Fixed Fans in Intel® Workstation System P4000CR
  • Intel W2600CR | Technical Product Specification - Page 92
    System P4000IP and Intel® Workstation System P4000CR Family TPS Thermal Management Figure 33. Hot-swap Fans in Intel® Server System P4000IP 3.4 Fan Control The fans provided in the Intel® Server Chassis P4000M Family contains a tachometer signal that can be monitored by the server management
  • Intel W2600CR | Technical Product Specification - Page 93
    System P4000CR Family TPS 4. Storage and Peripheral Drive Bays The Intel® Server System P4000IP and the Intel® Workstation System P4000CR product family has support for many storage device options, including:  Hot Swap 2.5'' Hard Disk Drives  Hot Swap 3.5'' Hard Disk Drives  SAS Expender Option
  • Intel W2600CR | Technical Product Specification - Page 94
    Server System P4000IP and Intel® Workstation System P4000CR Family TPS Storage and Peripheral Drive Bays Amber Status LED Green Activity LED Figure 35. 2.5'' Hard Disk Drive Support - LED Status Table 94. 2.5'' Hard Disk Drive Status LED States Amber Off Solid On Blink No access and no fault
  • Intel W2600CR | Technical Product Specification - Page 95
    and Intel® Workstation System P4000CR Family TPS There are several connectors on the backside of each backplane. The following illustration identifies each of them: Label A B C D Description 4-port Mini-SAS cable connectors SMBus-Out cable connector for multi-backplane support Power connector
  • Intel W2600CR | Technical Product Specification - Page 96
    ® Server System P4000IP and Intel® Workstation System P4000CR Family TPS Storage and Peripheral Drive Bays 4.2 3.5'' Hard Disk Drive Support The Intel® Server System P4308CP4MHEN and P4308CP4MHGC support 8x3.5'' drive configuration. The drive bay can support either SATA or SAS hard disk drives
  • Intel W2600CR | Technical Product Specification - Page 97
    P4000IP and Intel® Workstation System P4000CR Family TPS Table 97. 3.5'' Hard Disk Drive Activity LED States Green Condition Power on with no drive activity Power on with drive activity Power on and drive spun down Power on and drive spinning up Drive Type SAS SATA SAS SATA SAS SATA SAS SATA
  • Intel W2600CR | Technical Product Specification - Page 98
    P4000IP and Intel® Workstation System P4000CR Family TPS Storage and Peripheral Drive Bays Label A B C D E Description Reserved Power connector 4-port mini-SAS connectors SMBus connector Drive connector interface Figure 41. 2.5'' Backplane, Back Side A - Reserved B - Power Harness Connector
  • Intel W2600CR | Technical Product Specification - Page 99
    LED, hard drive present signal, and controls hard drive power-up during system power-on. 4.3 SAS Expander Card Option The 24-port SAS expander card and 36-port expander card is an optional accessory that can support up to 16 Hard drivers and 24 Hard drivers 2.5'' hard disk drives. The expander card
  • Intel W2600CR | Technical Product Specification - Page 100
    ® Server System P4000IP and Intel® Workstation System P4000CR Family TPS Storage and Peripheral Drive Bays 0-3 4-7 A B 8-11 C 12-15 D 0 24-port SAS 5 Expander 1 4 2 3 16-19 E 20-23 F Figure 44. 24-Port Expander SAS Connector/Drive Identification Block Diagram Figure 45. Internal 36
  • Intel W2600CR | Technical Product Specification - Page 101
    Storage and Peripheral Drive Bays Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS Each connector on the SAS expander card can be used as a "cable in" (SAS Controller to SAS Expander) or "cable out" (SAS Expander to Hot Swap Backplane) type connector. However, for
  • Intel W2600CR | Technical Product Specification - Page 102
    ® Server System P4000IP and Intel® Workstation System P4000CR Family TPS Storage and Peripheral Drive Bays 4.3.1 Protocol Support Each port on the expander cards support SAS devices, SATA II devices, or both using SSP, SMP, STP, and SATA II as follows:  Serial SCSI Protocol (SSP) to enable
  • Intel W2600CR | Technical Product Specification - Page 103
    Drive Bays Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS 4.5 Low Profile eUSB SSD Support The system provides support for a low profile eUSB SSD storage device. A 2mm 2x5-pin connector labeled "eUSB SSD" near the rear I/O section of the server board is used
  • Intel W2600CR | Technical Product Specification - Page 104
    , Fixed, Controlled Table 98. Calculated Mean Time Between Failure Subassembly (Server in 40C ambient air) Intel® Server board S2600IP Power Supply - 1200W CRPS (x2) PDB board Reduntant Cooling Fan (x5) Backplane board - HSBP8x2.5'' (x2) Front Panel board RMM4 Totals without motherboard = Totals
  • Intel W2600CR | Technical Product Specification - Page 105
    with motherboard = MTBF (hours) 200,730 806,373 1,675,959 108,708 712,161 8,272,282 10,960,687 79000 56700 Server Model P4308IP4LHGC FIT (flrs/10^9 hrs) 4,982 1,240 597 9,199 1,404 121 91 12,652 17,634 Subassembly (Server in 40C ambient air) Intel® Workstation board W2600CR Power Supply - 1200W
  • Intel W2600CR | Technical Product Specification - Page 106
    10,893 16,141 Subassembly (Server in 40C ambient air) Intel® Workstation board W2600CR Power Supply - 750W CRPS PDB board NR Cooling Fan - CPU fan NR Cooling Fan - PCI fan Front Panel board RMM4 Totals without motherboard = Totals with motherboard = MTBF (hours) 190,561 537,582 1,675,959 157,350
  • Intel W2600CR | Technical Product Specification - Page 107
    Servers/Rack 7.0 7.0 7.0 7.0 Mount BA Note: 1. Intel Corporation server boards contain a number of high-density VLSI and power delivery components that need adequate airflow to cool. Intel ensures through its own chassis development and testing that when Intel® server building blocks are used
  • Intel W2600CR | Technical Product Specification - Page 108
    system integrator to determine the proper shock level of the board and system if the system integrator chooses different system configuration or different chassis. Intel Corporation cannot be held responsible, if components fail or the server board does not operate correctly when used outside any of
  • Intel W2600CR | Technical Product Specification - Page 109
    . Make sure the latest system software is loaded on the server. This includes system BIOS, FRU/SDR, BMC firmware, and hot-swap controller firmware. The latest system software can be downloaded from http://www.intel.com/support/motherboards/server/. Revision 1.0 Intel order number G38159-001 97
  • Intel W2600CR | Technical Product Specification - Page 110
    Glossary Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS Glossary Word/Acronym ACA ANSI ATA ATX Auto-Ranging Definition Australian Communication Authority American National Standards Institute Advanced Technology Attachment Advanced Technology Extended Power supply
  • Intel W2600CR | Technical Product Specification - Page 111
    Intel® Workstation System P4000CR Family TPS Glossary Word/Acronym OCP OTP Over-current OVP PDB PFC PMBus PSU PWM ppm PWOK RI Ripple Rise Time Sag SAS Control Council for Interference An output voltage that is present whenever AC power is applied to the AC inputs of the supply. Revision 1.0 Intel
  • Intel W2600CR | Technical Product Specification - Page 112
    information:  Intel® Server Board S2600IP and Intel® Workstation Board W2600CR Technical Product Specification  Intel® Server System P4000IP and Intel® Workstation System P4000CR Service Guide  Intel® Server System P4000IP and Intel® Workstation System P4000CR Quick Installation Guide  BIOS for
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112

Intel
®
Server System P4000IP and
Intel
®
Workstation System
P4000CR Family
Technical Product Specification
Intel reference number G38159-001
Revision 1.0
February, 2012
Enterprise Platforms and Services Marketing