Invacare M51PR Owners Manual 3

Invacare M51PR Manual

Invacare M51PR manual content summary:

  • Invacare M51PR | Owners Manual 3 - Page 1
    and Maintenance Manual Pronto® M51™ Base with SureStep® Formula™ CG Tilt, Rehab Seating DEALER: This manual MUST be given to the user of the product. USER: BEFORE using this product, read this manual and save for future reference. For more information regarding Invacare products, parts, and services
  • Invacare M51PR | Owners Manual 3 - Page 2
    THE WARNINGS, CAUTIONS AND INSTRUCTIONS, CONTACT INVACARE TECHNICAL SUPPORT BEFORE ATTEMPTING TO SERVICE OR OPERATE THIS EQUIPMENT. OTHERWISE, INJURY OR DAMAGE MAY RESULT. REFERENCE DOCUMENTS DOCUMENT M50/51/61 Service Manual Formula CG Powered Seating Owner's Manual Adjustable ASBA Seats Owner
  • Invacare M51PR | Owners Manual 3 - Page 3
    Service 10 Operation Information ...10 Accessories ...11 Batteries...12 Grounding Instructions 4-SAFETY INSPECTION/TROUBLESHOOTING 22 Safety Inspection Checklists...22 Troubleshooting Guide ...23 Checking SECTION 6-SEAT 41 Tilting the Seat Assembly (Formula CG Only 41 Removing/Installing
  • Invacare M51PR | Owners Manual 3 - Page 4
    ONLINE at warranty.invacare.com Please have your model number and purchase date available to complete your registration. Any registration information you submit will only be used by Invacare Corporation and protected as required by applicable laws and regulations. Pronto® M51™ Base with SureStep
  • Invacare M51PR | Owners Manual 3 - Page 5
    this manual and apply . WHEELCHAIR USER As a manufacturer of wheelchairs, Invacare endeavors to supply a wide variety of wheelchairs to moving vehicle of any type. It is Invacare's position that users of wheelchairs should be available by the auto industry. Invacare cannot and does not recommend any
  • Invacare M51PR | Owners Manual 3 - Page 6
    Invacare accessories. Accessories designed by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare not in this manual, DO NOT perform that procedure. Have the seating system serviced by a qualified Pronto® M51™ Base with SureStep® 6 Part No.
  • Invacare M51PR | Owners Manual 3 - Page 7
    20 X 20): ARMRESTS: BATTERIES: WEIGHT LIMITATION: PERFORMANCE SPEED: TURNING RADIUS: **RANGE (VARIABLE): FORMULA CG ASBA VAN SEAT 16 to 20 inches 16 to 20 inches 16 to 20 inches 85° to 105° about the battery discharge indicator. Part No. 1148076 7 Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 8
    LABEL LOCATION LABEL LOCATION Pronto® M51™ Base with SureStep® 8 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 9
    side. Wheelchairs Without TRRO NOTE: Auto style seat positioning strap shown. This label is also on the airline style seat positioning strap. Part No. 1148076 9 Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 10
    first completely reading and understanding these instructions and any additional instructional material such as Owner's Manuals, Service Manuals or Instruction Sheets supplied with this product or . DO NOT operate on roads, streets or highways. Pronto® M51™ Base with SureStep® 10 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 11
    or service verify Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories designed by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products. Part No. 1148076 11 Pronto® M51
  • Invacare M51PR | Owners Manual 3 - Page 12
    manual are based on the use of deep cycle gel cell or sealed lead acid batteries. Invacare strongly recommends their use as the power source for this unit. Carefully read battery/battery charger information prior to installing, servicing plug. Pronto® M51™ Base with SureStep® 12 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 13
    Instructions DO NOT, under any circumstances, cut or remove the round grounding prong from any plug used with or for Invacare National Electrical Code. If Invacare does not recommend the use of its wheelchairs as a weight training apparatus. Invacare weight training apparatus, Invacare shall not be
  • Invacare M51PR | Owners Manual 3 - Page 14
    , CD players, cassette players, and small appliances, such as electric shavers and hair dryers, so far as we know, are not likely to cause EMI problems to your powered wheelchair. Pronto® M51™ Base with SureStep® 14 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 15
    20 volts per meter. 3) The immunity level of the product is unknown. Modification of any kind to the electronics of this wheelchair as manufactured by Invacare may adversely affect the EMI immunity levels. Part No. 1148076 15 Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 16
    only as a "basic" guide. The techniques that are discussed on the following pages have been used successfully by many. Individual wheelchair users often develop skills to deal with daily living activities that may differ from those described in this manual. Invacare recognizes and encourages each
  • Invacare M51PR | Owners Manual 3 - Page 17
    traverse up to a 2‐inch bump or threshold, stopping after the wheels cross the bump poses a problem. The chair cannot reverse over the bump at this point. Continue forward and then turn around. While a slippery surface. Proceed with caution. Part No. 1148076 17 Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 18
    your back straight and bend your knees whenever tilting wheelchair or traversing curbs or other impediments. Invacare recommends using two assistants and making thorough preparations. Use only secure, nondetachable parts for hand-hold supports Pronto® M51™ Base with SureStep® 18 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 19
    seat. Refer to Tilting the Seat Assembly (Formula CG Only) on page 42. 3. Remove any accessories on the wheelchair. 4. Bend your knees and keep your back straight. 5. Ensure that the casters are oriented as shown in FIGURE 3.2. 6. Using the rear and front forks as hand hold supports
  • Invacare M51PR | Owners Manual 3 - Page 20
    body weight into seat with transfer. During independent transfer, little or no seat platform will be beneath you. Use a transfer board if at all possible. Pronto® M51™ Base with SureStep® 20 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 21
    wheelbase. Reach back only as far as your arm will extend without changing your sitting position. Part No. 1148076 FIGURE 3.5 Reaching and Bending - Backward 21 Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 22
    /TROUBLESHOOTING SECTION 4-SAFETY INSPECTION/ TROUBLESHOOTING NOTE: Every six months or as necessary take your wheelchair to a qualified dealer for a thorough inspection and servicing for flat spots and wear. ❑ Ensure casters are free of debris. Pronto® M51™ Base with SureStep® 22 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 23
    . ❑ Check that all labels are present and legible. Replace if necessary. Troubleshooting Guide NOTE: For additional troubleshooting information and explanation of error codes, refer to the Electronics Manual supplied with each wheelchair. Part No. 1148076 23 Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 24
    wiring problem. Invacare. Contact Dealer/Invacare. Contact Dealer/Invacare for service. Engage motor lock. Contact Dealer/Invacare for service. Reprogram controller (Refer to electronics manual supplied with wheelchair). Have terminals cleaned. Contact Dealer/Invacare for service. Pronto® M51
  • Invacare M51PR | Owners Manual 3 - Page 25
    SECTION 4-SAFETY INSPECTION/TROUBLESHOOTING SPJ™+ w/PSS or SPJ+ w/ACC Joysticks The joystick information gauge and the service indicator give indications of the type of fault or error detected by the of-Neutral-at-Power-Up to Neutral. mode. Part No. 1148076 25 Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 26
    SECTION 4-SAFETY INSPECTION/TROUBLESHOOTING Service Indicator Light Diagnostics NUMBER OF FLASHES 1 2 3 4 5 6 7 8 9 10 11 ERROR CODE DESCRIPTION User Fault Battery Fault Left Motor Fault Right Motor Fault Left Park Brake Fault Right Park Brake Fault Remote Fault Controller Fault Communications
  • Invacare M51PR | Owners Manual 3 - Page 27
    INSPECTION/TROUBLESHOOTING SYMPTOM module is not communicating with the control module (Error code E200). Check the connections between the joystick or display Invacare to have controller reprogrammed. Have terminals cleaned. Contact Dealer/Invacare for Service. Part No. 1148076 27 Pronto® M51
  • Invacare M51PR | Owners Manual 3 - Page 28
    INSPECTION/TROUBLESHOOTING Checking Battery Charge Level The following "Do's" and "Don'ts" are provided for your convenience and safety. DON'T DO Don't perform any installation or maintenance without first reading this manual. Read and understand this manual and any service information that
  • Invacare M51PR | Owners Manual 3 - Page 29
    After ANY adjustments, repair or service and before use, make sure that , refer to FIGURE 5.1. NOTE: MPJ+ Joystick available on Formula CG seating system only. 1. To turn the power On, perform one SPJ+ Joysticks MPJ+ Joystick (CG ONLY) On/Off Button On/Off Switch FIGURE 5.1 Turning the Power On
  • Invacare M51PR | Owners Manual 3 - Page 30
    of these procedures: • MK6i™ SPJ+ w/PSS and MK6i SPJ+ w/ACC Joystick Switches and Indicators on page 31. • MPJ+ Joystick Switches and Indicators on page 33. Pronto® M51™ Base with SureStep® 30 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 31
    procedure, refer to FIGURE 5.3. Joystick On/Off Button Decrease Speed Button (Tortoise) GREEN LED Service Indicator *NOTE: The mode button is only present on SPJ+ w/ACC joystick. Information the wheelchair is required to drive at 20% speed. Part No. 1148076 31 Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 32
    is prevented while the system is charging. Service Indicator The AMBER service indicator will light when an error or fault occurs. Refer to Service Indicator Light Diagnostics on page 30 for a listing of the flash codes and what they indicate. Pronto® M51™ Base with SureStep® 32 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 33
    LEDs indicate the type of fault detected. Refer to Service Indicator Light Diagnostics on page 30 for the diagnostic indications on page 34. NOTE: MPJ+ Joystick available on Formula CG seating system only. Drive Select Toggle Switch The drive select No. 1148076 33 Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 34
    joystick and provides information on the status of the wheelchair through a backlit display. The LCD display is readable in both bright sunlight and complete darkness. Pronto® M51™ Base with SureStep® 34 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 35
    shows the Battery Level and will change depending on the available battery power. This indicator is shown on every screen. This area displays status or instructions. Part No. 1148076 35 Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 36
    was highlighted. NOTE: The Drive's name, warning/info message, status icon and battery indicator are displayed on this screen. FIGURE 5.7 LCD Display Screens - Driving Screen Pronto® M51™ Base with SureStep® 36 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 37
    ) Switch The remote mode reset switch functions the same way as the mode switch. Refer to Mode Switch on page 38. Part No. 1148076 37 Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 38
    Medium, Full) • Latched Modes • Sleep Mode • RIM Mode* • Remote Drive Selection Mode* • Tilt/Recline Mode* • Information Center Display Selection (does not require Reset activation at power up) If any of or reading wheelchair parameters. Pronto® M51™ Base with SureStep® 38 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 39
    mounting bracket to the desired position. 7. Turn the adjustment lock lever to secure the joystick mounting tube into the mounting bracket. Part No. 1148076 39 Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 40
    connectors. 3. Push the latch in to secure the joystick connector to the other connectors. Latch Other Connectors FIGURE 5.11 Disconnecting/Connecting the Joysticks - MPJ+ Joysticks Pronto® M51™ Base with SureStep® 40 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 41
    securely - otherwise injury or damage may result. Before performing any maintenance, adjustment or service, verify that ON/OFF switch on the joystick is in the OFF position. Tilting the Seat Assembly (Formula CG Only) ƽ WARNING Make sure power to the wheelchair is OFF before performing this
  • Invacare M51PR | Owners Manual 3 - Page 42
    two screws and locknuts, secure the seat assembly to the two front seat posts. Seat Assembly Screw Locknut Clip Prop Rod Front Seat Post FIGURE 6.1 Tilting the Seat Assembly (Formula CG Only) Pronto® M51™ Base with SureStep® 42 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 43
    installed ONLY. For wheelchairs with the Formula PTO Plus seating system, refer to Tilting the Seat Assembly (Formula CG Only) on page 41. Removing 1. Disconnect the joystick cable at rear of front of the seat FIGURE 6.2 Removing/Installing the Seat Assembly 43 Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 44
    tightened securely - otherwise injury or damage may result. Before performing any maintenance, adjustment or service verify that On/Off switch on the joystick is in the Off position. DO NOT stand the footboard assembly from the wheelchair frame. Pronto® M51™ Base with SureStep® 44 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 45
    it is flush with the footboard bracket. 4. Securely tighten the jam nut and washer to secure the mounting screw in place. Part No. 1148076 45 Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 46
    FOOTBOARD Quick Release Pin Footboard Assembly Mounting Hole Quick Release Pin Detent Ball Outer Edge of Tube Detent Balls FIGURE 7.3 Adjusting the Footboard Assembly - Depth Pronto® M51™ Base with SureStep® 46 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 47
    injury or damage may result. Before performing any maintenance, adjustment or service verify that On/Off switch on the joystick is in the of the following: • Tilt the seat assembly to the up position. Refer to Tilting the Seat Assembly (Formula CG Only) on page 41. Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 48
    one of the following: • Lower the seat assembly to the up position. Refer to Tilting the Seat Assembly (Formula CG Only) on page 41. • Install the seat assembly from the wheelchair. Refer to FIGURE 8.1 Removing/Installing the Battery Shroud Pronto® M51™ Base with SureStep® 48 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 49
    wheels slightly until the motor release lever engages. Right Motor Release Lever Shown Disengaged Engaged FIGURE 8.2 Engaging/Disengaging Motor Release Lever Part No. 1148076 49 Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 50
    Washer Caster Headtube Washer Fork NOTE: Components exploded for clarity. There is no need to remove the fork from the base frame. FIGURE 8.4 Adjusting Forks Pronto® M51™ Base with SureStep® 50 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 51
    Batteries ƽ WARNING After any adjustments, repair or service and before use, make sure that all attaching of rubber gloves is recommended when working with batteries. Invacare strongly recommends that battery installation and battery replacement ALWAYS 1148076 51 Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 52
    Configuration NEGATIVE (-) Battery Terminal DO NOT Use POSITIVE (+) Battery Terminal NEGATIVE (-) Battery Terminal U1 Battery POSITIVE (+) Battery Terminal FIGURE 9.1 Using the Proper Batteries U1 Battery Pronto® M51™ Base with SureStep® 52 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 53
    Joystick on page 121. 3. Perform one of the following: • Tilt the seat assembly to the up position. Refer to Tilting the Seat Assembly (Formula CG Only) on page 41. • Remove the seat assembly from the /Connecting the Joystick on page 121. Part No. 1148076 53 Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 54
    one of the following: • Lower the seat assembly to the up position. Refer to Tilting the Seat Assembly (Formula CG Only) on page 41. • Install the seat assembly from the wheelchair. Refer to Removing /Installing Batteries from/into Battery Tray Pronto® M51™ Base with SureStep® 54 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 55
    ] (Detail "B" of FIGURE 9.3). 5. Position the batteries into the wheelchair. Refer to Removing/Installing Batteries from/ into Battery Tray on page 53. Part No. 1148076 55 Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 56
    to Controller U1 Battery Tie-wraps BLACK Connectors NOTE: Handles on batteries removed for clarity. U1 Batteries FIGURE 9.3 Connecting/Disconnecting Battery Cables Plug into controller Pronto® M51™ Base with SureStep® 56 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 57
    running out of charge. Recharge batteries as soon as possible. Battery Charger/ Programming Port FIGURE 9.4 SPJ+ w/PSS and SPJ+ w/ACC Joysticks Part No. 1148076 57 Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 58
    of the batteries. Read and carefully follow the individual instructions for each charger (supplied or purchased). If charging instructions are not supplied, consult a qualified technician for will help you understand this automatic process are: Pronto® M51™ Base with SureStep® 58 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 59
    shock. ƽ WARNING Read and carefully follow the manufacturer's instructions for each charger (supplied or purchased). If charging instructions are not supplied, consult a qualified technician for proper from/into Battery Tray on page 53. Part No. 1148076 59 Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 60
    from the on‐board battery charger and wall outlet. Charger may need to be replaced. Contact an Invacare dealer or qualified technician. 3. When the On/Off LED indicator light is Off, charger is Fully charged FIGURE 9.6 On-Board Battery Charger Pronto® M51™ Base with SureStep® 60 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 61
    follow the individual instructions for each charger (supplied or purchased). If charging instructions are not supplied the life of the batteries. CAUTION Only use a charger approved by Invacare when charging through the joystick on this wheelchair model. DO NOT use Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 62
    the transport ready package ONLY. ƽ WARNING Contact Invacare Corporation (800-333-6900) with any questions personal items should be removed and secured separately. Postural supports, positioning devices, and/or strap(s) should not be SERVICEABLE. Pronto® M51™ Base with SureStep® 62 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 63
    TRRO and TRBKTS for the purposes described in this manual. About Transport Ready Packages TRRO includes four factory‐ wheelchair, in a moving vehicle of any type. It is Invacare's position that users of wheelchairs should be transferred into appropriate seating Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 64
    's head ranges from approximately 47-inches for a small adult female to about 61inches for a tall adult male. 8 in. 8 in. 16 in. FCZ Frontal Clear Zone Pronto® M51™ Base with SureStep® 64 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 65
    Restraint Systems (WTORS) that have been installed in accordance with the manufacturerʹs instructions and SAE J2249. NOTE: A copy of SAE J2249 Wheelchair Tie‐down and brackets in accordance with the manufacturerʹs instructions and SAE J2249. Part No. 1148076 65 Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 66
    19. The pelvic belt, provided by Invacare, has been designed to accommodate use on either side of the vehicle. If necessary, follow the instructions below to reverse the orientation of the End of Slot FIGURE 10.2 Wheelchair-Anchored Belts Pronto® M51™ Base with SureStep® 66 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 67
    Platform 45° NOTE: Rear view of the wheelchair and human surrogate secured on test platform and tilted to 45°. FIGURE 10.3 Vehicle-Anchored Belts Seating System ƽ WARNING This wheelchair has been . Refer to the seating system owner's manual. Part No. 1148076 67 Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 68
    angles are especially important if the pelvic belt is intended to be used for postural support in addition to occupant restraint in a frontal crash. Steeper angles will reduce the tendency ARMRESTS, WHEELS, ETC. FIGURE 10.4 Positioning Belts Pronto® M51™ Base with SureStep® 68 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 69
    NOTES NOTES Part No. 1148076 69 Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 70
    NOTES NOTES Pronto® M51™ Base with SureStep® 70 Part No. 1148076
  • Invacare M51PR | Owners Manual 3 - Page 71
    NOTES NOTES Part No. 1148076 71 Pronto® M51™ Base with SureStep®
  • Invacare M51PR | Owners Manual 3 - Page 72
    'S CONTROL, AND SUCH EVALUATION WILL BE SOLELY DETERMINED BY INVACARE. THE WARRANTY SHALL NOT APPLY TO PROBLEMS ARISING FROM NORMAL WEAR AND TEAR OR FAILURE TO ADHERE TO THE PRODUCT INSTRUCTIONS. A CHANGE IN OPERATING NOISE, PARTICULARLY RELATIVE TO MOTORS AND GEARBOXES DOES NOT CONSTITUTE A FAILURE
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

Owner’s Operator and Maintenance Manual
DEALER:
This manual MUST be given to
the user of the product.
USER:
BEFORE using this product, read this
manual and save for future reference.
For more information regarding
Invacare products, parts, and services,
please visit www.invacare.com
Pronto
®
M51
Base with
SureStep
®
Formula
CG Tilt,
Rehab Seating