Home » Invacare Manuals » Wheelchairs » Invacare SPREEGT » Manual Viewer

Invacare SPREEGT Owners Manual

Invacare SPREEGT Manual

View all Invacare SPREEGT manuals

Add to My Manuals
Save this manual to your list of manuals

Invacare SPREEGT manual content summary:

Invacare SPREEGT | Owners Manual - Page 1
Owner's Operator and Maintenance Manual Solara®/Spree GT™ DEALER: This manual MUST be given to the user of the wheelchair. USER: BEFORE using this wheelchair, read this manual and save for future reference. For more information regarding Invacare products, parts, and services, please visit www.
Invacare SPREEGT | Owners Manual - Page 2
use this product or any available optional equipment without first completely reading and understanding these instructions and any additional instructional material such as owner's manuals, service manuals or instruction sheets supplied with this product or optional equipment. If you are unable to
Invacare SPREEGT | Owners Manual - Page 3
Tipping - Curbs: Method 2 - Wheelchair without Step Tube 24 Stairways ...25 Transferring To and From Other Seats 26 SECTION 3-SAFETY INSPECTION/TROUBLESHOOTING 27 Safety Inspection Checklists...27 Inspect/Adjust Initially ...27 Inspect/Adjust Weekly...28 Inspect/Adjust Monthly...28 Inspect/Adjust
Invacare SPREEGT | Owners Manual - Page 4
TABLE OF CONTENTS TABLE OF CONTENTS SECTION 4-TRANSPORTING 30 Transporting ...30 SECTION 5-MAINTENANCE 31 Maintenance Safety Precautions ...31 Suggested Maintenance Procedures ...31 SECTION 6-FRONT RIGGINGS 33 Installing/Removing Swingaway Footrest 33 Installing...33 Removing ...33 Installing/
Invacare SPREEGT | Owners Manual - Page 5
TABLE OF CONTENTS TABLE OF CONTENTS Removing Armrest...42 Adjusting Armrest...42 Removing/Installing and Using Flipback Armrests 43 Removing/Installing Flip Back Armrest 43 Removing Flip Back Armrest ...43 Installing Flip Back Armrest ...43 Using Armrest...44 Replacing Conventional Armrest Pads
Invacare SPREEGT | Owners Manual - Page 6
TABLE OF CONTENTS TABLE OF CONTENTS Installing...59 Replacing ...59 Installing and Removing a Seating System 60 SECTION 9-TILT 61 Engaging Tilt-In-Space ...61 Adjusting Trigger Release Cables ...62 Adjusting Hublock Cables...64 Positioning Tilt Locking Collars...65 Adjusting Upper Tilt Locking
Invacare SPREEGT | Owners Manual - Page 7
TABLE OF CONTENTS TABLE OF CONTENTS Installing New Recliner Cables ...79 Replacing the Gas Cylinders ...81 Adjusting the Gas Cylinders...83 Determining Necessary Adjustments 83 Performing Adjustments...84 SECTION 14-CONTRACTURE FOOTPLATE OPTION 86 Adjusting the Contracture Assembly 86 Forward
Invacare SPREEGT | Owners Manual - Page 8
REGISTER YOUR PRODUCT REGISTER YOUR PRODUCT The benefits of registering include: 1. Safeguarding your investment. 2. Ensuring long-term maintenance and servicing of your product. 3. Receiving updates with product information, maintenance tips and industry news. Register ONLINE at warranty.invacare.
Invacare SPREEGT | Owners Manual - Page 9
to secure an unoccupied wheelchair during transport. Only use the transport brackets included with TRRO and TRBKTS for the purposes described in this manual. As of this date, the Department of Transportation has not approved any tie-down systems for transportation of a user while in a wheelchair, in
Invacare SPREEGT | Owners Manual - Page 10
SPECIAL NOTES ƽ WARNING Only use the transport brackets included with TRRO and TRBKTS for the purposes described in this manual. SEAT POSITIONING STRAP ALWAYS wear your seat positioning strap. Inasmuch as the SEAT POSITIONING STRAP is an option on this wheelchair (you may order with
Invacare SPREEGT | Owners Manual - Page 11
bushing for a positive lock. Keep detent balls clean. WARNING DO NOT OPERATE WITHOUT THE ANTI-TIP TUBES REV. 5/98 INSTALLED. P/N 60106X144 WARNING Refer to Owner's Manual for proper anti-tipper setting. 1085379 11 Solara®/Spree GT™
Invacare SPREEGT | Owners Manual - Page 12
LABEL LOCATIONS Wheelchairs with Transport Ready Option Solara®/Spree GT™ 12 Part No 1125027
Invacare SPREEGT | Owners Manual - Page 13
TYPICAL PRODUCT PARAMETERS TYPICAL PRODUCT PARAMETERS SOLARA SPREE GT OVERALL WIDTH: 12-INCH WHEEL 18-24-INCH WHEELS Seat Width + 8¼ inches Seat Width + 9¼ inches (Example: 16 inch Wide Wheelchair = 24¼ inches Overall Width) OVERALL DEPTH: Without Front Riggings Short Frame - 24-3/8 inches
Invacare SPREEGT | Owners Manual - Page 14
TYPICAL PRODUCT PARAMETERS SOLARA SPREE GT BACK HEIGHT: 20-24 inches WHEEL LOCKS: Push-to-Lock (Standard) or Pull-to-Lock TILT-IN-SPACE: Dual Cable Trigger Mechanism (Standard) - 5° to 50° of Tilt RECLINER BACK: Dual Cable Trigger Mechanism (Optional) 0-175° of Tilt FRAME: Aluminum and
Invacare SPREEGT | Owners Manual - Page 15
SECTION 1-GENERAL GUIDELINES SECTION 1-GENERAL GUIDELINES ƽ WARNING SECTION 1 - GENERAL GUIDELINES contains important information for the safe operation and use of this product. Information for Healthcare Professionals/Assistants The Solara/Spree wheelchair MUST be operated by a healthcare
Invacare SPREEGT | Owners Manual - Page 16
SECTION 1-GENERAL GUIDELINES BACK HEIGHT SEAT DEPTH BACK ANGLE SEATING SYSTEM TILT ANGLE CASTER SIZE CASTER POSITION WHEEL SIZE WHEEL POSITION USER CONDITION WHEEL LOCKS ANTI-TIPPERS LOCKING COLLAR NOTE: When changes to the left hand column occur, follow across the chart and refer to the X
Invacare SPREEGT | Owners Manual - Page 17
the wheelchair. Operation Information Unless otherwise noted, all service and adjustments should be performed while the wheelchair is unoccupied looseness before using the wheelchair. If loose, contact a qualified technician for instructions. The necessary back angle (90°, 100°, 110° or 120°) MUST
Invacare SPREEGT | Owners Manual - Page 18
traversing such surfaces. DO NOT use the spreader bar for lifting or transporting the wheelchair. DO NOT use the spreader bar as a weight bearing support. Make sure detent balls of the quick-release pin are fully released before operating the wheelchair. The detent balls MUST be protruding past the
Invacare SPREEGT | Owners Manual - Page 19
or TRBKTS Only Transport ready packages are not retrofittable to existing models and are not field serviceable. Only use the transport brackets included with TRRO and TRBKTS for the purposes described in this manual. Tire Pressure DO NOT use your wheelchair unless it has the proper tire pressure
Invacare SPREEGT | Owners Manual - Page 20
the close attention of the wheelchair user as well as the assistant. This manual points out the most common procedures and techniques involved in the safe operation architectural barriers. Use this information only as a "basic" guide. The techniques that are discussed on the following pages have
Invacare SPREEGT | Owners Manual - Page 21
SECTION 2-SAFETY/HANDLING OF WHEELCHAIRS To assure stability and proper operation of your wheelchair, you MUST at all times maintain proper balance. Your wheelchair has been designed to remain upright and stable during normal daily activities as long as you do not move beyond the center of gravity.
Invacare SPREEGT | Owners Manual - Page 22
the wheelchair. Also, be aware of detachable parts such as arms or legrests. These MUST NEVER be used to move the wheelchair or as lifting supports, as they may be inadvertently released, resulting in possible injury to the user and/or assistant(s). When learning a new assistance technique, have an
Invacare SPREEGT | Owners Manual - Page 23
SECTION 2-SAFETY/HANDLING OF WHEELCHAIRS Reaching, Bending - Backward NOTE: For this procedure, refer to FIGURE 2.3. ƽ WARNING DO NOT lean over the top of the back upholstery. This will change your center of gravity and may cause you to tip over. Position wheelchair as close as possible to the
Invacare SPREEGT | Owners Manual - Page 24
SECTION 2-SAFETY/HANDLING OF WHEELCHAIRS Roll the wheelchair forward and slowly lower the front of the wheelchair in one continuous movement onto the sidewalk. Do not let the wheelchair drop the last few inches to the ground. This could result in injury to the occupant. Push the wheelchair forward
Invacare SPREEGT | Owners Manual - Page 25
Invacare recommends using two assistants and making thorough preparations. Make sure to use ONLY secure, non-detachable parts for hand-hold supports. Follow these instructions for moving the wheelchair between floors when an elevator is NOT available: 1. If necessary, rotate the anti-tippers so the
Invacare SPREEGT | Owners Manual - Page 26
SECTION 2-SAFETY/HANDLING OF WHEELCHAIRS Transferring To and From Other Seats ƽ WARNING BEFORE attempting to transfer in or out of the wheelchair, every precaution should be taken to reduce the gap distance. Align both casters parallel with the object you are transferring onto. Also be certain the
Invacare SPREEGT | Owners Manual - Page 27
SECTION 3-SAFETY INSPECTION/TROUBLESHOOTING SECTION 3-SAFETY INSPECTION/ TROUBLESHOOTING NOTE: Every six months take your wheelchair to a qualified technician for a thorough inspection and servicing. Regular cleaning will reveal loose or worn parts and enhance the smooth operation of your wheelchair
Invacare SPREEGT | Owners Manual - Page 28
SECTION 3-SAFETY INSPECTION/TROUBLESHOOTING ❑ Ensure that casters are free of debris. ❑ Ensure wheel locks do not interfere with tires when rolling. ❑ Ensure wheel lock pivot points are free of
Invacare SPREEGT | Owners Manual - Page 29
Clean upholstery and armrests. ❑ Clean and wax all parts. ❑ Check that all labels are present and legible. Replace if necessary. Troubleshooting - Mechanical CHAIR VEERS LEFT/RIGHT SLUGGISH TURN/PERFORMANCE CASTERS FLUTTER SQUEAKS AND RATTLES LOOSENESS IN CHAIR SOLUTIONS X X If pneumatic tires
Invacare SPREEGT | Owners Manual - Page 30
SECTION 4-TRANSPORTING SECTION 4-TRANSPORTING Transporting 1. Remove the seating system. Refer to the seating system Owner's Manual for installation and removal of the seating system. 2. Remove the footrests. Refer to Installing/Removing Swingaway Footrest on page 33 or Adjusting Footplate Height
Invacare SPREEGT | Owners Manual - Page 31
SECTION 5-MAINTENANCE SECTION 5-MAINTENANCE Maintenance Safety Precautions ƽ WARNING After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware is tightened securely - otherwise injury or damage may result. CAUTION DO NOT overtighten hardware attaching to the
Invacare SPREEGT | Owners Manual - Page 32
SECTION 5-MAINTENANCE 6. Periodically adjust wheel locks as tires wear. Refer to Wheel Lock Adjustment on page 72. 7. Make sure that ALL bolts are tight before operating wheelchair. 8. Keep tilt slides and roller bearings free of dirt and lint to ensure proper operation of the tilt mechanism. 9.
Invacare SPREEGT | Owners Manual - Page 33
SECTION 6-FRONT RIGGINGS SECTION 6-FRONT RIGGINGS ƽ WARNING After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur. Installing/Removing Swingaway Footrest NOTE: For this procedure,
Invacare SPREEGT | Owners Manual - Page 34
SECTION 6-FRONT RIGGINGS Installing/Removing Lift-Off Footrest NOTE: For this procedure, refer to FIGURE 6.2. Installing 1. Insert the footrest assembly mounting pins into the mounting tube of the wheelchair frame. 2. Repeat STEP 1 for the other footrest assembly. 3. If necessary, adjust the
Invacare SPREEGT | Owners Manual - Page 35
. 3. Reposition the footplate to the desired height. 4. Reinstall the socket bolt through the mounting holes of the footplate and footrest support. ƽ WARNING DO NOT overtighten socket bolt and locknut. Footrest MUST be able to rotate upward from the horizontal to the vertical position. Footrest
Invacare SPREEGT | Owners Manual - Page 36
position. NOTE: The footplate hinge will fall to the down position. 4. Tighten the socket screw and locknut that secure the footplate hinge to the footrest support until the footplate hinge remains in the up position. 5. Check the up and down motion of the footplate hinge to make sure the user of
Invacare SPREEGT | Owners Manual - Page 37
to the footrest assembly or the desired inversion/eversion is obtained. 90° Footrest Support Flat Screws Detail "A" - Side View of Footplate and Footrest Support Footrest Support Footplate Footplate Half Clamp Adjustment Screw Footplate Hinge Locknuts FIGURE 6.6 Adjusting Adjustable Angle
Invacare SPREEGT | Owners Manual - Page 38
one of the following: • Raising: Lift legrest assembly up to desired height. • Lowering: Lift elevating legrest assembly up with one hand. While supporting the elevating legrest assembly (and user's leg), pull release lever up with other hand and lower legrest assembly to desired height. Release
Invacare SPREEGT | Owners Manual - Page 39
SECTION 6-FRONT RIGGINGS Adjusting Footplate Height and Calfpad Height/Depth NOTE: For this procedure, refer to FIGURE 6.9. Adjusting the Footplate Height 1. Loosen locknut and washer securing the slide tube to the elevating legrest. 2. Reposition footplate to desired height securely tighten
Invacare SPREEGT | Owners Manual - Page 40
, refer to FIGURE 6.11. 1. Remove the hex screw and washer that secure the existing sector block to the front rigging support tube. 2. Position the new sector block on the front rigging support tube. Make sure the locking pin is facing up. 3. Secure the new sector block to the front rigging
Invacare SPREEGT | Owners Manual - Page 41
SECTION 6-FRONT RIGGINGS Installing Impact Guards/Calf Strap/H-Calf Strap NOTE: For this procedure, refer to FIGURE 6.12. NOTE: Impact guards are standard equipment on Model ST footrests. No assembly is required. 1. Remove impact guard/calf strap from packaged container. 2. Secure the impact guards
Invacare SPREEGT | Owners Manual - Page 42
SECTION 7-ARMS SECTION 7-ARMS ƽ WARNING After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur. Installing/Removing/Adjusting Dual Point Armrest (Fixed And
Invacare SPREEGT | Owners Manual - Page 43
for opposite side of wheelchair, if necessary. 5. Install the new/existing armrest on to the wheelchair. Refer to in this procedure of the manual. Installing Flip Back Armrest 1. If necessary, unlock new/existing armrest assembly by flipping the arm assembly release levers located on the side rail
Invacare SPREEGT | Owners Manual - Page 44
SECTION 7-ARMS 4. Install the quick release pin into the rear arm socket. 5. Repeat STEPS 1-4 for opposite side, if necessary. DETAIL "A" Unlock (Horizontal) Lock (Vertical) Arm Socket Locked - Down (Vertical) Unlocked - Up (Horizontal) Armrest Release Lever Height Adjustment Lever FIGURE
Invacare SPREEGT | Owners Manual - Page 45
Replacing Conventional Armrest Pads NOTE: For this procedure, refer to FIGURE 7.4. 1. Remove the mounting screws that secure the existing armrest pad to the armrest assembly. 2. Install new armrest pad and securely tighten with the existing mounting screws. SECTION 7-ARMS Armrest Pad Armrest
Invacare SPREEGT | Owners Manual - Page 46
SECTION 7-ARMS Installing Locking Cantilever Arms NOTE: For this procedure, refer to FIGURE 7.6. NOTE: When removing the locknuts and washers from the cantilever arm assembly, leave the top hex bolt, coved washers and spacer (between adjustment plate and cantilever arm) in place. 1. Slide the
Invacare SPREEGT | Owners Manual - Page 47
Adjustment Plate Coved Washers SECTION 7-ARMS Back Cane Locknuts Washers Actuator Spacer Top Hex Bolt and Coved Washer Bottom Hex Bolt Cantilever Arm FIGURE 7.6 Installing Locking Cantilever Arms - Adjusting Locking Cantilever Arm Height Adjusting Locking Cantilever Arm Angle NOTE: For this
Invacare SPREEGT | Owners Manual - Page 48
SECTION 7-ARMS 90° Back Angle Bracket Arm Adjustment Plate 100° Back Angle Bracket Arm Adjustment Plate 110° Back Angle Bracket Arm Adjustment Plate 120° Back Angle Bracket Arm Adjustment Plate Arm Adjustment Plate Locking Pin Locknut Washer FIGURE 7.7 Adjusting Locking Cantilever Arm Angle
Invacare SPREEGT | Owners Manual - Page 49
SECTION 7-ARMS Using/Installing/Adjusting Non-Locking Cantilever Arms ƽ WARNING DO NOT use lap trays with non-locking cantilever arms. Using Non-Locking Cantilever Arms ƽ WARNING DO NOT use lap trays with non-locking cantilever arms. NOTE: For this procedure, refer to FIGURE 7.8. 1. Pull the end
Invacare SPREEGT | Owners Manual - Page 50
SECTION 7-ARMS Adjusting Non-Locking Cantilever Arm Height NOTE: For this procedure, refer to FIGURE 7.9 on page 49. 1. Remove the locknut and washer from the lower hex bolt securing the cantilever arm to the back cane. 2. Slide the cantilever arm assembly out of the back cane. 3. Reposition the
Invacare SPREEGT | Owners Manual - Page 51
SECTION 7-ARMS Arm Pad Replacement for Cantilever Arms NOTE: For this procedure, refer to FIGURE 7.11. 1. Remove the mounting screws from the armrest pad. 2. Replace with NEW armrest pad. 3. Secure with existing hardware. Desk Length Arm Pads Full Length Arm Pads Armrest Pad Arm Pad
Invacare SPREEGT | Owners Manual - Page 52
SECTION 7-ARMS Removing T-Arms 1. Press the locking lever in and lift the T-Arm straight up and out of the T-Arm socket. NOTE: If the T-Arm does not slide up and down in the T-Arm socket as desired, adjust the T-Arm socket. Refer to Adjusting T-Arm Sockets on page 54. 2. Repeat STEP 1 for opposite
Invacare SPREEGT | Owners Manual - Page 53
SECTION 7-ARMS Adjusting T-Arm Width NOTE: For this procedure, refer to FIGURE 7.14. 1. Remove the two mounting screws that secure the arm pad to the arm tube. 2. Turn the arm pad around and reposition the arm pad on the arm tube. 3. Re-secure the arm pad to the arm tube with the two mounting
Invacare SPREEGT | Owners Manual - Page 54
SECTION 7-ARMS Adjusting T-Arm Sockets NOTE: For this procedure, refer to FIGURE 7.16. NOTE: Perform this procedure if the T-Arm is too loose in the socket or does not easily slide UP and DOWN in the socket. 1. Remove the rear wheels from the wheelchair, if necessary. Refer to Installing/Removing
Invacare SPREEGT | Owners Manual - Page 55
SECTION 7-ARMS Adjusting T-Arm Transfer Assists And/or Side Guards NOTE: For this procedure, refer to FIGURE 7.17. 1. Remove the T-Arm from the wheelchair. Refer to Installing/Removing T-Arms on page 51. 2. Remove the two socket screws that secure the side guard to the bottom clamp. NOTE: Adjusting
Invacare SPREEGT | Owners Manual - Page 56
SECTION 8-BACK/SEAT SECTION 8-BACK/SEAT ƽ WARNING After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur. Folding/Unfolding the Back Assembly ƽ WARNING The back
Invacare SPREEGT | Owners Manual - Page 57
Adjusting the Back Height NOTE: For this procedure, refer to FIGURE 8.2. NOTE: Both back canes should be adjusted to the same adjustment hole. 1. Remove the back height adjustment screw and locknut that secure the back cane to the wheelchair frame. 2. Adjust the back cane to the desired height
Invacare SPREEGT | Owners Manual - Page 58
handle. NOTE: There will be an audible click. NOTE: If hinge arms DO NOT hold the position, contact Invacare technical support. Adjustable Angle Stroller Handle Button Hinge Arm FIGURE 8.4 Adjusting the Adjustable Angle Stroller Handles Installing/Replacing Seat Positioning Straps NOTE: For
Invacare SPREEGT | Owners Manual - Page 59
Replacing 1. Remove the hex screw, locknut and seat positioning strap from the back plate of the wheelchair frame. 2. Discard existing seat positioning strap. 3. Install the new seat positioning strap to the wheelchair. Refer to Installing/Replacing Seat Positioning Straps on page 58. SECTION 8-
Invacare SPREEGT | Owners Manual - Page 60
a motor vehicle with the factory installed seating system ONLY. 1. Ensure that the seating system is compatible with this wheelchair. 2. Refer to the seating system Owner's Manual for installation and removal. Solara®/Spree GT™ 60 Part No 1125027
Invacare SPREEGT | Owners Manual - Page 61
SECTION 9-TILT SECTION 9-TILT ƽ WARNING After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur. Engaging Tilt-In-Space ƽ WARNING The Invacare Solara
Invacare SPREEGT | Owners Manual - Page 62
SECTION 9-TILT c. When the seat reaches the desired angle, release the foot lever. DETAIL "A" Hand Operated Tilt Back Cane Trigger Release Lever Tilt Slide Tilt Mechanism DETAIL "B" - FOOT OPERATED TILT Back Canes Tilt Slide Foot Lever Foot Lever Tilt Mechanism FIGURE 9.1 Engaging Tilt-In-
Invacare SPREEGT | Owners Manual - Page 63
SECTION 9-TILT 1. To adjust the left tilt mechanism, do the following: A. Squeeze the trigger release lever of the right cable assembly (Detail "A"). B. Check that the teeth of the right gear sector engage with the gear rack (Detail "B"). C. Try to tilt the wheelchair. The wheelchair should not tilt
Invacare SPREEGT | Owners Manual - Page 64
SECTION 9-TILT DETAIL "A" Cable Locking Nut Trigger Release Lever Cable Assembly DETAIL "B" Gear Sector Cable Adjusting Nut Gear Rack Gear Assembly NOTE: If there is a gap between the top of the gear rack teeth and the bottoms of the gear sector teeth, the gear sector is not fully engaged.
Invacare SPREEGT | Owners Manual - Page 65
PROFESSIONALS/ASSISTANTS: Make sure the occupant of the wheelchair is properly positioned. ALWAYS engage both wheel locks. After ANY adjustments, repair or service and before use, make sure all attaching hardware is tightened securely and locking collars are positioned at the same position on the
Invacare SPREEGT | Owners Manual - Page 66
SECTION 9-TILT Adjusting Upper Tilt Locking Collar NOTE: For this procedure, refer to FIGURE 9.4. NOTE: This procedure adjusts the degree of tilt that the wheelchair returns to for normal operation. If the amount of tilt MUST be limited. Refer to Adjusting Lower Tilt Locking Collar on page 66.
Invacare SPREEGT | Owners Manual - Page 67
SECTION 9-TILT DETAIL "A" Bearing Housing Tilt Slide Set Screw Lower Tilt Locking Collar FIGURE 9.5 Adjusting Lower Tilt Locking Collar Part No 1125027 67 Solara®/Spree GT™
Invacare SPREEGT | Owners Manual - Page 68
SECTION 10-VENT TRAY SECTION 10-VENT TRAY Adjusting the Vent Tray Height NOTE: For this procedure, refer to FIGURE 10.1. 1. Remove the two mounting screws and two locknuts that secure the front vent tray hanger bracket to the wheelchair frame. 2. Remove the four mounting screws, four washers and
Invacare SPREEGT | Owners Manual - Page 69
SECTION 11-WHEELS/FORKS SECTION 11-WHEELS/FORKS ƽ WARNING After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur. Installing/Removing Rear Wheels Quick-Release NOTE: For
Invacare SPREEGT | Owners Manual - Page 70
SECTION 11-WHEELS/FORKS Permanent Axle NOTE: For this procedure, refer to FIGURE 11.2. Rear Wheel Permanent Axle NOTE: To remove rear wheels, reverse this procedure. 1. Remove the permanent axles from the packaged container. 2. Install permanent axle through the rear wheel and axle plate.
Invacare SPREEGT | Owners Manual - Page 71
SECTION 11-WHEELS/FORKS Seat-To-Floor Height Adjustment ƽ WARNING Repositioning the axle plates (seat-to-floor height) MUST be performed by a qualified technician. Adjusting Forks NOTE: For this procedure, refer to FIGURE 11.4. 1. Remove the dust cover from the caster headtube. 2. To properly
Invacare SPREEGT | Owners Manual - Page 72
SECTION 12-WHEEL LOCKS/ANTI-TIPPERS SECTION 12-WHEEL LOCKS/ANTITIPPERS ƽ WARNING After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur. Wheel Lock Adjustment NOTE: For this procedure, refer
Invacare SPREEGT | Owners Manual - Page 73
Lock Handle Wheel Lock Assembly Rear Wheel Wheel Lock Handle Wheel Lock Assembly Rear Wheel ƽ INSTALLATION WARNING After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur. ALWAYS engage both hublocks and
Invacare SPREEGT | Owners Manual - Page 74
SECTION 12-WHEEL LOCKS/ANTI-TIPPERS Operating Hublocks NOTE: If hublocks DO NOT engage properly (wheels move while hublocks are locked) or DO NOT disengage properly contact a qualified technician. Patient Operated Hublock NOTE: For this procedure, refer to FIGURE 12.3. 1. Perform one of the
Invacare SPREEGT | Owners Manual - Page 75
SECTION 12-WHEEL LOCKS/ANTI-TIPPERS Installing/Adjusting Anti-Tippers NOTE: For this procedure, refer to FIGURE 12.6. NOTE: A 1 ½ to 2 ¼ inch clearance between the bottom of the anti-tipper wheels and the floor MUST be maintained at all times. Installing the Anti-Tippers 1. Remove the anti-tippers
Invacare SPREEGT | Owners Manual - Page 76
SECTION 13-RECLINER BACK OPTION SECTION 13-RECLINER BACK OPTION ƽ WARNING After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware is tightened securely - otherwise injury or damage may result. The back height, seat depth, back angle, seating
Invacare SPREEGT | Owners Manual - Page 77
SECTION 13-RECLINER BACK OPTION ƽ WARNING (CONTINUED) Before using ANY recline position of this wheelchair, make sure the rear wheels are in the MOST REARWARD position to maintain the stability of the wheelchair. DO NOT change the handling/maneuverability of the wheelchair by moving the rear wheels
Invacare SPREEGT | Owners Manual - Page 78
SECTION 13-RECLINER BACK OPTION Replacing Back/Headrest Upholstery NOTE: For this procedure, refer to FIGURE 13.2. Back Upholstery 1. Remove the twelve mounting screws and washers that secure the back upholstery to the back canes. 2. Remove existing back upholstery from back canes. 3. Install new
Invacare SPREEGT | Owners Manual - Page 79
SECTION 13-RECLINER BACK OPTION Adjusting the Recliner Cables NOTE: For this procedure, refer to Adjusting the Gas Cylinders on page 83. Replacing the Recliner Cables NOTE: For this procedure, refer to FIGURE 13.3 on page 81. NOTE: For ease of assembly, replace one recliner cable at a time. Removing
Invacare SPREEGT | Owners Manual - Page 80
SECTION 13-RECLINER BACK OPTION CAUTION Ensure that the recline trigger release lever operating the RIGHT gas cylinder secures to the LEFT side of the adjustable angle stroller handle and that the recline trigger release lever operating the LEFT gas cylinder secures to the RIGHT side of the
Invacare SPREEGT | Owners Manual - Page 81
Recline Trigger Release Lever Recliner Cable Cable Locking Nut SECTION 13-RECLINER BACK OPTION DETAIL "A" Fitting End Cable Locking Collar Trigger Release Lever Operating LEFT Gas Cylinder DETAIL "C" Adjustable Angle Stroller Handle Trigger Release Lever Operating RIGHT Gas Cylinder Mounting
Invacare SPREEGT | Owners Manual - Page 82
Screwing the rod of the gas cylinder too far past center of the opening in the actuator housing will activate the gas cylinders providing NO support for the back. Possible injury to the user and/or attendant could result. 5. Screw the cylinder rod of the new gas cylinder into the actuator
Invacare SPREEGT | Owners Manual - Page 83
Squeeze Trigger Release Lever To Align Mounting Holes (STEP 7, 8) SECTION 13-RECLINER BACK OPTION Actuator Housing Jam Nut (STEPS 1, 4, 6) Cylinder Rod Gas Cylinder Button Head Cap Screw (STEPS 2, 9) Bracket Spacer (STEPS 2, 9) Washer (STEPS 2, 9) Locknut (STEPS 2,9) Nylon Washer (STEPS 2,
Invacare SPREEGT | Owners Manual - Page 84
SECTION 13-RECLINER BACK OPTION ACTION Back releases WITHOUT squeezing EITHER trigger release lever. (Actuator too LOW.) Back DOES NOT release while squeezing BOTH trigger release levers. (Actuator too HIGH.) Back releases while squeezing the LEFT trigger release lever ONLY. (Actuator too LOW.)
Invacare SPREEGT | Owners Manual - Page 85
SECTION 13-RECLINER BACK OPTION 7. To adjust the right gas cylinder: Repeat STEPS 1-3 for the left handle of the recliner cable. Trigger Release Lever MUST Look Like This DETAIL "B" Too Low Too High Cable Locking Nut Cable Adjusting Nut Actuator Housing Actuator FIGURE 13.5 Adjusting the Gas
Invacare SPREEGT | Owners Manual - Page 86
SECTION 14-CONTRACTURE FOOTPLATE OPTION SECTION 14-CONTRACTURE FOOTPLATE OPTION Adjusting the Contracture Assembly Forward Mount NOTE: For this procedure, refer to FIGURE 14.1. NOTE: The number of mounting positions on the contracture assembly may vary due to the width of the wheelchair. 1.
Invacare SPREEGT | Owners Manual - Page 87
Contracture Platform - Remove the two mounting bolts and locknuts that lock the angle adjustment of the contracture assembly. 2. Lift the contracture support up/down to achieve the desired angle. 3. Perform one of the following: • Bilateral Contracture - Align the mounting hole in the contracture
Invacare SPREEGT | Owners Manual - Page 88
the button on the quick-release pin and insert through the contracture support and the angle adjustment bracket. 2. If necessary adjust the angle of Pop Rivet Angle Adjustment Bracket Button Quick-Release Pin Contracture Support FIGURE 14.4 Using the Optional QuickRelease Pin Angle Adjustment of
Invacare SPREEGT | Owners Manual - Page 89
.7 on page 90. Bilateral Contracture 1. Remove the mounting bolt, two coved washers, washer and locknut that secure the footplate bracket to the contracture support. 2. Move the footplate bracket up/down to achieve desired height. 3. Align the mounting hole in the footplate bracket with one of seven
Invacare SPREEGT | Owners Manual - Page 90
OPTION Bilateral Contracture Contracture Platform Mounting Holes Lock Nut Contracture Support Mounting Bolts Coved Washers Upper Support Washers Footplate Bracket Locknuts Contracture Platform (Support - Contracture Platform Not Shown) Mounting Bolts FIGURE 14.7 Contracture Footplate
Invacare SPREEGT | Owners Manual - Page 91
backpacks, and other personal items should be removed and secured separately. Postural supports, positioning devices, and/or strap(s) should NOT be relied on for occupant not retrofittable to existing models and are not field serviceable. Only use the transport brackets included with TRRO and TRBKTS
Invacare SPREEGT | Owners Manual - Page 92
SECTION 15-TRANSPORT READY OPTION About Transport Ready Packages TRRO includes four factory-installed transport brackets and a wheelchair anchored pelvic belt. TRRO has been crash-tested in accordance with ANSI/RESNA WC Vol 1 Section 19 Frontal Impact Test requirements for wheelchairs with a 168 lb
Invacare SPREEGT | Owners Manual - Page 93
SECTION 15-TRANSPORT READY OPTION Securing the Wheelchair to the Vehicle Positioning the Wheelchair in the Vehicle ƽ WARNING This wheelchair must be in a forward facing position during travel in a motor vehicle. The recommended clear zones for wheelchair seated occupants restrained by BOTH pelvic
Invacare SPREEGT | Owners Manual - Page 94
is to be used only with Wheelchair Tie-down and Occupant Restraint Systems (WTORS) that have been installed in accordance with the manufacturer's instructions and SAE J2249. NOTE: A copy of SAE J2249 Wheelchair Tie-down and Occupant Restraint Systems (WTORS) for use in Motor Vehicles can be
Invacare SPREEGT | Owners Manual - Page 95
RESNA WC/19. The pelvic belt provided by Invacare has been designed to accommodate use on either side of the vehicle. If necessary, follow the instructions below to reverse the orientation of the pelvic belt to accommodate the vehicle-anchored upper torso belt. 1. Install the pelvic belt pin (Detail
Invacare SPREEGT | Owners Manual - Page 96
) vehicle-installed restraint system. Ensure that the factory installed seating system is secured to the wheelchair frame before operation. Refer to the seating system owner's manual. Solara®/Spree GT™ 96 Part No 1125027
Invacare SPREEGT | Owners Manual - Page 97
45 degrees to the horizontal. Steeper side-view pelvic belt angles are especially important if the pelvic belt is intended to be used for postural support in addition to occupant restraint in a frontal crash. Steeper angles will reduce the tendency for a vertical gap to develop between the user and
Invacare SPREEGT | Owners Manual - Page 98
NOTES NOTES Solara®/Spree GT™ 98 Part No 1125027
Invacare SPREEGT | Owners Manual - Page 99
shall be limited to such repair and/or replacement. For warranty service, please contact the dealer from whom you purchased your Invacare product. THE WARRANTY SHALL NOT APPLY TO PROBLEMS ARISING FROM NORMAL WEAR OR FAILURE TO ADHERE TO THESE INSTRUCTIONS. THE FOREGOING EXPRESS WARRANTY IS EXCLUSIVE
Invacare SPREEGT | Owners Manual - Page 100
Invacare Corporation USA One Invacare Way Elyria, Ohio USA 44036-2125 800-333-6900 www.invacare.com Canada 570 Matheson Blvd E Unit 8 Mississauga Ontario L4Z 4G4 Canada 800-668-5324 All rights reserved. Trademarks are identified by the symbols ™ and ®. All trademarks are owned by or licensed to