JVC BP11 Instruction Manual

JVC BP11 - XV Blu-Ray Disc Player Manual

JVC BP11 manual content summary:

  • JVC BP11 | Instruction Manual - Page 1
    BD320-JN_BUSAJJK_OM_ENG 8/31/09 12:16 PM Page 1 Blu-ray Disc Player XV-BP10 XV-BP11 INSTRUCTIONS For customer use: Enter below the Model No. and Serial No. which are located on the rear of cabinet. Retain this information for future reference. Model No. Serial No. LVT2101-001A [J]
  • JVC BP11 | Instruction Manual - Page 2
    important operating and maintenance (servicing) instructions in the literature accompanying Check the specification page of this owner's manual to be certain. Do not overload wall As an ENERGY STAR® Partner, JVC has determined that this product or product models meet the ENERGY STAR® guidelines for
  • JVC BP11 | Instruction Manual - Page 3
    block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged in any
  • JVC BP11 | Instruction Manual - Page 4
    Customer Service Center. Many BD-ROM/DVD discs are encoded with copy protection. Because of this, you should only connect your player directly Blu-ray Disc" is a trademark. "BONUSVIEW" is trademark of Blu-ray Disc Association. This product is licensed under the AVC patent portfolio license and VC
  • JVC BP11 | Instruction Manual - Page 5
    Display 6 Symbols Used in this Manual 6 Notes on Discs 6 Moisture Condensation 6 Handling the Unit 6 Playable Discs 7 Regional Code 7 BD-ROM Disc Features 8 Compatibility Notes 9 Certain System Requirements 9 Language setting 9 Resetting the Player 9 Using a USB Flash Drive 10 Using the
  • JVC BP11 | Instruction Manual - Page 6
    and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out. This manual provides information on the operation and maintenance of your player. Should the unit require service, contact an authorized service location. About the Symbol Display " " may
  • JVC BP11 | Instruction Manual - Page 7
    files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. This player supports 8 cm disc except Blu-ray Disc. 7
  • JVC BP11 | Instruction Manual - Page 8
    , playback is interrupted each time a new menu screen is accessed. Due to BD-ROM disc's ability to preload data from the disc without interrupting playback, a menu can BD-ROM titles. BD-ROM Disc Compatibility This player supports only BD-ROM Profile 1.1. • Discs supporting BONUSVIEW (BD-ROM version
  • JVC BP11 | Instruction Manual - Page 9
    :16 PM Page 9 Compatibility Notes Because BD-ROM are a new format, certain disc, digital connection and other compatibility issues are possible. If you experience compatibility problems, please contact an authorized Customer Service Center. Viewing high-definition content and up-converting standard
  • JVC BP11 | Instruction Manual - Page 10
    USB extension cable or USB HUB, the USB Flash Drive may not be recognized. Some USB Flash Drives may not work with this unit. Digital camera and mobile phone are not supported. USB Displays [Setup] menu. (page 17) Note: When a disc and USB Flash Drive have the contents, it can choose those menus.
  • JVC BP11 | Instruction Manual - Page 11
    ) Button Switches the unit ON or OFF. b Disc Tray Insert a disc here. c Z (OPEN/CLOSE) Opens or closes the disc tray. d Display Window Shows the current status of the player. e Remote Sensor Point the Remote Control here. f USB Port Connect a USB Flash Drive. g N / X (PLAY / PAUSE) Starts playback
  • JVC BP11 | Instruction Manual - Page 12
    ON (1/'): Switches the player ON or OFF. DISC MENU: Accesses menu on a disc. Direction buttons: Select an option in the menu. ENTER ( ): Acknowledges menu selection. Remote Control Operation Point the Remote Control at the remote sensor and press the buttons. Caution • Do not put the batteries
  • JVC BP11 | Instruction Manual - Page 13
    jack on the player to the HDMI jack on a HDMI compatible TV or monitor (H). 2. Set the TV's source to HDMI (refer to TV's Owner's manual). HDMI H has already been established may result in malfunctions. To solve the problem, turn off the player and then turn it on again. When the HDMI connection
  • JVC BP11 | Instruction Manual - Page 14
    8/31/09 12:16 PM Page 14 Connections to Your TV Tip: Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections. Caution - Make sure the player is connected directly to the TV. Tune the TV to the correct video input channel
  • JVC BP11 | Instruction Manual - Page 15
    the [Setup] menu (see page 18). With digital audio connection (SPDIF or HDMI), Disc Menu button sounds of BD-ROM may not be heard if the [SPDIF] or [ -channel Audio/Video Receiver that supports one or more of the audio formats supported by your player. Check the receiver manual and the logos on the
  • JVC BP11 | Instruction Manual - Page 16
    16 Resolution Setting The player provides several output resolutions HDMI OUT will change to 480p. • If you select a resolution manually and then con- nect the HDMI jack to TV and your TV video frame rate of the content on the BD-ROM disc. VIDEO OUT connection The resolution of the VIDEO OUT jack
  • JVC BP11 | Instruction Manual - Page 17
    to the next level: Press B on the Remote Control. To go back to the previous level: Press b on the Remote Control. General Operation 1. Press HOME and the from the HDMI OUT jack. For this setting, please refer to the manuals of your display device. [YCbCr] - Select when connecting to an HDMI display
  • JVC BP11 | Instruction Manual - Page 18
    equipped with an HDMI or Digital Audio input jack is connected to the HDMI OUT or DIGITAL AUDIO OUT jack on this player. 18 DRC (Dynamic Range Control) When a disc encoded in Dolby Digital or Dolby Digital Plus is playing back, you may wish to compress the dynamic range of the audio
  • JVC BP11 | Instruction Manual - Page 19
    on the remote control to input the 4-digit password. To create new password, press ENTER when the [New] option is highlighted. Input new password and , you can clear it using the following steps: 1. Remove any disc that might be in the player. 2. Select [LOCK] t [Password] option in the [Setup
  • JVC BP11 | Instruction Manual - Page 20
    appear. [Factory Set] - If you need to, you can reset the player to all its factory settings. Some options cannot be reset. (Rating, - Deletes the BD contents from the connected USB Flash Drive. The files (such as music or photo file) stored in the USB Flash Drive except BD contents are not erased
  • JVC BP11 | Instruction Manual - Page 21
    "Xx" appears on the screen briefly. Press N (PLAY) to resume playback (from the scene point). If you press x (STOP) on the remote control again or unload the disc ("x" appears on the screen.), the unit will clear the stopped point. (Xx = Resume Stop, x = Complete Stop) Notes: • The resume point may
  • JVC BP11 | Instruction Manual - Page 22
    has a menu, the Title DVD menu or Popup menu appears on the screen. Depending on the disc, the menu may not be available. BD AVCHD The menu appears on the screen. Depending on the disc, the menu may not be available. DVD BD AVCHD Playing repeatedly: During playback, press REPEAT repeatedly to
  • JVC BP11 | Instruction Manual - Page 23
    -screen display. DVD BD AVCHD Notes on general features: • When you turn on the player or replace a disc, the player returns to the initial default setting. Depending on a disc, a specific type of audio the disc has is output. • Depending on the pre-recorded contents of the BD-ROM, some functions
  • JVC BP11 | Instruction Manual - Page 24
    and holding b / B button. Note: This function may not work on some disc or titles. Marker Search DVD BD AVCHD To enter a Marker You can start playback points. To enter a marker, press MARKER at the desired point on the disc. The Marker icon appears on the TV screen briefly. Repeat to enter up
  • JVC BP11 | Instruction Manual - Page 25
    BD-J contents playback. Use the appropriate buttons as indicated by the display. Depending on the disc contents, the functions of each button may differ. Screen Saver The screen saver appears when you leave the player in Stop mode for about five minutes. If the Screen Saver is displayed for five
  • JVC BP11 | Instruction Manual - Page 26
    starts. You can use variable playback functions. Refer to pages 21-25. 3. Press DISC MENU to move to the list menu. Notes: • On the [MOVIE] menu, use discs may not be played in this player. • Some DVD-VR disc are made with CPRM data by DVD RECORDER. This unit cannot support these kinds of discs
  • JVC BP11 | Instruction Manual - Page 27
    player can play Audio CDs and MP3/WMA files. Before playing MP3/WMA files, read "MP3/WMA audio file requirement" on right. 1. Insert Audio CD or a disc containing MP3/WMA files, or connect the USB read the contents of the media. • This unit cannot support the ID3 Tag embedded in the MP3 file. • The
  • JVC BP11 | Instruction Manual - Page 28
    on the TV screen. Note: When the USB Flash Drive is connected and a disc is inserted simultaneously, the menu for selecting a zoom function can be operated by the ZOOM button on the remote control. g Use v V to selects an option between [ image files are not supported. Depending on the size and number
  • JVC BP11 | Instruction Manual - Page 29
    language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu]. Language Abkhazian Afar Afrikaans Albanian Ameharic Mongolia MN Morocco MA Nepal NP Netherlands NL Netherlands Antilles AN New Zealand NZ Nigeria NG Norway NO Oman OM Pakistan PK Panama
  • JVC BP11 | Instruction Manual - Page 30
    at does not work properly. the remote sensor on the player. • Finalize the disc on that unit. • Point the Remote Control at the remote sensor of the player. • The Remote Control is too far from the player. • Operate the Remote Control closer to the player. The system does not • A state is
  • JVC BP11 | Instruction Manual - Page 31
    , 192 kHz sampling) More than 100 dB (ANALOG OUT connectors only) Less than 0.008% More than 95 dB DC 5 V 500 mA Video cable (1) Audio cable (1) Remote control (1) Batteries (1) Note: Design and specifications are subject to change without prior notice. Reference 31
  • JVC BP11 | Instruction Manual - Page 32
    : the output always include interactive and secondary audio.) *2 This player automatically selects the HDMI audio according to the decoding capability of the CD while playback. • The Dolby TrueHD audio recorded on some Blu-ray discs consists of Dolby Digital and TrueHD audio. Dolby Digital audio is
  • JVC BP11 | Instruction Manual - Page 33
    BD320-JN_BUSAJJK_OM_ENG 8/31/09 12:16 PM Page 33 Open source software notice This product includes • Freetype library : copyright © 2003 The FreeType Project (www.freetype.org). • libpng library : copyright © 2004 Glenn Randers-Pehrson • Zlib compression library: Copyright © 1995-2002 Jean-loup
  • JVC BP11 | Instruction Manual - Page 34
    BD320-JN_BUSAJJK_OM_ENG 8/31/09 12:16 PM Page 34 34
  • JVC BP11 | Instruction Manual - Page 35
    BD320-JN_BUSAJJK_OM_ENG 8/31/09 12:16 PM Page 35 MEMO 35 Reference
  • JVC BP11 | Instruction Manual - Page 36
    XV-BP10 / XV-BP11 BD320-JN_BUSAJJK_OM_ENG 8/31/09 12:16 PM Page 36 EN 0809SKMLGEEGL P/N: MFL62026484
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

XV-BP10
XV-BP11
Blu-ray Disc Player
INSTRUCTIONS
LVT2101-001A
[J]
For customer use:
Enter below the Model No. and
Serial No. which are located on the
rear of cabinet. Retain this
information for future reference.
Model No.
Serial No.
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 1