JVC DR-MV150B other

Thank you for your purchase of the JVC DR-MV150B DVD Video Recorder.

If you have any questions regarding the hookup or operation of your DR-MV150B, please contact our

Customer Care Center at 1-800-252-5722

Please Note:

Be sure to connect the AC power plug into the power outlet after all other connections are

completed

T

his unit doesn’t have an Auto Clock Setting. You will

need to manually set the clock as shown on page15 of

the owner’s manual under the Initial Setup Wizard. You

can also look on page 17 of the owner’s manual and

follow the directions for Clock-Set.

When the DR-MV150B is first turned on, it will flash"

Hello" for a few seconds. Please wait until "Hello" stops

flashing before using. After a disc is inserted into the

tray, it takes 25-30 seconds until the set can be

operated.

The recorder must be connected to the television using

AV cables or HDMI cable, and the television’s input

mus be selected correctly to see the video. Refer to the

TV’s instruction book.

For viewing the Recorder video on TV that has only RF

connector, you have to use an RF converter. Refer to

the Quick Start Guide.

Connect the recorder’s “Antenna IN” to the wall con-

nector. Connect the recorder to the TV using RF cable

and AV cable. Perform channel scan on both TV and

the recorder. Select the viewing channel on the TV and

the recording channel on the recorder. Use the TV’s

input select to flip between the two.

Your cable box or Satellite box outputs the selected

channel through all outputs (RF, AV, or HDMI). In order

to watch one channel while recording another, you

need to connect cable signal (not from the cable box)

or antenna signal direct to the TV using RF con

nection

Refer to page 35 of the instruction book

After replacing the batteries, the remote code is reset

to ‘C’. Refer to page 8 of the instruction book and set it.

The remote control supplied with DR

-

M150 is not a

multi-brand-remote.

You must "Finalize" the DVD before it can play in

another DVD player. Please see page 22 in the

Instruction book.

DVD-R, DVD+R, DVD-RW and DVD+RW, DVD-RAM

can be used to record on your DR-MV150B. For recom-

mended recordable DVD discs, please refer to page 3 in

your owner’s manual.

The signal you are attempting to record is copy prohibit-

ed. This recorder can record copy permitted video on

normal recordable disc and ‘copy once’ video on CPRM

disc. Contact the retailer or JVC parts department for

CPRM disc.

The DR-MV150B has a progressive scan feature. This

feature only works with a TV that accepts progressive

scan signal. If the picture is distorted, press OUTPUT-

STATUS button on the front panel repeatedly to select

480i. Refer to page 6 of the Instruction book.

When viewing VCR playback, the picture can be dis-

torted when output status is selected to 1080p. If the

picture is distorted, press OUTPUT STATUS on the

front panel repeatedly until the picture appears normal.

Refer to page 6 of the Instruction book.

When HDMI is connected and 720p/1080i/1080p is

selected there will be no signal output via the COMPO-

NENT OUT. Press OUTPUTSTATUS button and select

480i or 480p in order to watch the video signal from

COMPONENTOUT.

Why is my DR-MV150B not showing 1080p picture

via component output?

Why is the VCR playback picture distorted when

the output status is set to 1080p?

Why my DR-MV150B is showing a distorted

picture?

Why do I get a message “Copy Prohibited” when

trying to record

What DVDs can I use to record on my DR-

MV150B?

Why the newly recorded DVD plays in the DR-

MV150B but does not play in other DVD players?

Can I control my TV or Satellite box using this

remote?

Why is my remote not working after I change

batteries?

How do I set timer recording?

I am using cable box. Why am I unable to watch one

program while recording another one

How can I watch one program while recording

another program

My TV has RF connector only. How can I view the

Recorder Menu, DVD playback, VCR playback or

Channel scan?

Why can’t I see Menu, DVD playback, VHS playback,

or the Recording channel on my TV?

When I turn on my DR

-

MV150B, it flashes "Hello"

and buttons on the remote control or the front

panel are not responding for 10 - 15 seconds. Is

this normal?

During the Initial Set Up, I am being asked to set

the Clock. Does this model have Auto Clock Set?

DR-MV150B Quick Guide FAQ

LVT2018-001B

0309SKMLGEEGL

JVC DR-MV150B other

JVC DR-MV150B - DVDr/ VCR Combo Manual

JVC DR-MV150B manual content summary: