JVC DRMV100B other

c

DVD-R, DVD+R, DVD-RW and DVD+RW,

DVD-RAM can be used to record on your

DR-MV100B.

For recommended recordable DVD discs, please

refer to page 3 in your owner’s manual.

When your DR-MV100B is first turned on, it will flash

"Hello" as the internal EPROM chip is updated with

information.

c

Please wait until "Hello" stops flashing before you

attempt to use the remote control or front panel

buttons.

It takes 25-30 seconds until the set

can be operated when a disc is on the tray.

Your DR-MV100B has a progressive scan feature.

This feature only works with a TV that accepts a pro-

gressive scan signal.

c

If the picture is distorted, press OUTPUT

STATUS button and select 480i.

c

If the picture is distorted, press OUTPUT STATUS

repeatedly until the picture appears normally to

change the resolution setting.

There is no signal output from COMPONENT OUT

when HDMI is connected and 720p/1080i/1080p is

selected at OUTPUT STATUS.

c

Press OUTPUT STATUS button and select either

480i or 480p in order to watch the video signal

from COMPONENT OUT.

c

You must "Finalize" the DVD before it can play in

another DVD player.

Please see page 21 in your owner’s manual.

This unit doesn’t have an Auto Clock Setting. You will

need to manually set your clock as shown on page

14 of your owner’s manual under the Initial Setup

Wizard. You can also look on page 16 of your

owner’s manual and follow the directions for Clock

Set.

During the Initial Set Up, I am being asked

to set the Clock. Does this model have Auto

Clock Set?

My newly recorded DVD plays in my

DR-MV100B but does not play in other DVD

players.

My DR-MV100B is showing no picture.

When the resolution is set to 1080p in VCR

playback, the picture can be distorted.

My DR-MV100B is showing a distorted

picture.

When I turn on my DR-MV100B, it flashes

"Hello" and all the buttons on the remote

control and the front panel will not respond

for 10 - 15 seconds. Is this normal?

What DVDs can I use to record on my

DR-MV100B?

Thank you for your purchase of the JVC DR-MV100B DVD Video Recorder.

If you have any questions regarding the hookup or operation of your DR-MV100B, please contact our

Customer Care Center at 1-800-252-5722.

Please Note:

Be sure to connect the AC power plug into the power outlet after all other connections are completed.

DR-MV100B Quick Guide FAQ’s

JVC Customer Care Center

1-800-252-5722

For additional troubleshooting tips please refer to pages 49-51 in your owners manual.

LVT1903-001A

0308SKMLGEEGL