JVC GD-V422UA Instruction Manual

JVC GD-V422UA - Plasma Display Monitor Manual

Get JVC GD-V422UA - Plasma Display Monitor PDF manuals and user guides View all JVC GD-V422UA manuals
Add to My Manuals
Save this manual to your list of manuals

JVC GD-V422UA manual content summary:

  • JVC GD-V422UA | Instruction Manual - Page 1
    PLASMA DISPLAY MONITOR GD-V422U GD-V502U INSTRUCTIONS For customer Use: Enter below the Model No. and the Serial No. which is located on the rear panel of the cabinet. Retain this information for future reference. Model No. Serial No.
  • JVC GD-V422UA | Instruction Manual - Page 2
    product are a risk of electric shock to persons. The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance. WARNING: To prevent damage which may result in fire or shock hazard, do not expose this
  • JVC GD-V422UA | Instruction Manual - Page 3
    bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 9) Do not defeat the safety purpose to lightning and power-line surges. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
  • JVC GD-V422UA | Instruction Manual - Page 4
    JVC family of customers. We hope that you will have many years of enjoyment from your new Plasma Display. To obtain maximum benefit from your set, please read these Instructions . (kHz) / V-FREQ. (Hz 35 Troubleshooting 36 VIDEO / COMPONENT / RGB / PC input signals ...... 37 Specifications 38 4
  • JVC GD-V422UA | Instruction Manual - Page 5
    and used in accordance with the instruction manual, may cause harmful interference to or modifications to this monitor not expressly approved by JVC could cause harmful interference and would void the user's accessory must be used when connecting this Plasma Display to video equipment. (see page 10
  • JVC GD-V422UA | Instruction Manual - Page 6
    damage to the cable is suspected, have it repaired at an Authorized Service Center. If the Plasma Display will not be used for a long period of time, unplug the power cord from the wall outlet. If problems occur during use If a problem occurs (such as no picture or no sound), or if smoke or
  • JVC GD-V422UA | Instruction Manual - Page 7
    JVC) • Speakers TS-C422SPG (GD-V422U) TS-C5001SPG (GD-V502U) • Stand Unit TS-C50P5G • Wall Mounting Unit TS-C50P6G • Wall Mounting Unit (angled TS-C50P2G • Ceiling Suspension Unit TS-C50P3G Always be sure to ask a qualified technician to carry out set-up. When using the Plasma display panel,
  • JVC GD-V422UA | Instruction Manual - Page 8
    have the Accessories and items shown Operating Instruction book GD-V422U GD-V502U Remote Control Transmitter EUR646532 INPUT SURROUND VOL N R PICTURE SOUND SET UP MULTI ZOOM PIP SWAP SELECT MOVE PICTURE POS. /SIZE ASPECT PC OFF TIMER PLASMA DISPLAY Batteries for the Remote Control
  • JVC GD-V422UA | Instruction Manual - Page 9
    the optional accessory speakers. Refer to the speaker's Installation Manual for details on speaker installation. (Example: GD-V422U) Speakers (Optional accessories) 1 2 1 SPEAKERS Terminals (2) Insert the optional Video Input Cards before combining the Plasma Display with the Stand Unit. 9
  • JVC GD-V422UA | Instruction Manual - Page 10
    signals exceed 1,200 lines.) (2) The display resolution is a maximum of 768 × 768 dots (GD-V422U), 1,024 × 768 dots (GD-V502U) when the aspect mode is set to "4:3", and 1,024 × 768 dots (GD-V422U), 1,366 × 768 dots (GD-V502U) when the aspect mode is set to "16:9". If the display resolution exceeds
  • JVC GD-V422UA | Instruction Manual - Page 11
    not supplied with this set. Installing the ferrite core (Large size) Open The SERIAL terminal conforms to the RS-232C interface specification, so that the Plasma Display can be controlled by a computer which is connected to this terminal. The computer will require software which allows the sending
  • JVC GD-V422UA | Instruction Manual - Page 12
    Connections AV & COMPONENT Connection COMPONENT VIDEO OUT RR Example of input signal source DVD Y, PB, PR, PB OUT Y Digital TV-SET-TOP-BOX (DTV-STB) L AUDIO OUT R RCA-BNC adapter plug AUDIO SLOT1 Example of input signal source S VIDEO VCR CAMCORDER R AUDIO L VIDEO IN VIDEO OUT R AUDIO L VD
  • JVC GD-V422UA | Instruction Manual - Page 13
    N R Connecting the AC plug to the Wall Outlet Note: AC plug types vary between countries / regions. Press the Main power switch on the Plasma Display to turn the Plasma Display on: Power-On. Power Indicator: Green If the power indicator is lit red, press the power button on the remote control to
  • JVC GD-V422UA | Instruction Manual - Page 14
    and PC IN Selection) (see page 18) Volume Adjustment C.A.T.S sensor Volume Up "+" Down "-" Plasma C.A.T.S (Contrast Automatic Tracking System) When the menu screen is displayed. Plasma C.A.T.S automatically senses the ambient light conditions and "+": press to move the cursor up adjusts the
  • JVC GD-V422UA | Instruction Manual - Page 15
    adjust the aspect. (see page 19) PC OFF TIMER OFF TIMER button The Plasma Display can be preset to switch to stand-by after a fixed period. and 0 minutes (off timer cancelled) each time the button is pressed. PLASMA DISPLAY 30 60 90 PC button Press the "PC" input mode selection button
  • JVC GD-V422UA | Instruction Manual - Page 16
    STANDARD 0 0 0 OFF INPUT SURROUND VOL N R PICTURE SOUND SET UP MULTI ZOOM PIP SWAP SELECT MOVE PICTURE POS. /SIZE ASPECT PC OFF TIMER PLASMA DISPLAY To PICTURE POS./ SIZE adjust menu (see page 20) During "VIDEO (S VIDEO)" and "COMPONENT" input signal. During "RGB" and "PC" input
  • JVC GD-V422UA | Instruction Manual - Page 17
    On-Screen Menu Display from Remote Control 2 Press to access [ from the unit ] R each adjust - + INPUT MENU VOL ENTER screen. Press the R button to return to previous menu. Press to return to previous menu screen. To SIGNAL screen for VIDEO (S VIDEO) (see page 33, 34) To SIGNAL screen
  • JVC GD-V422UA | Instruction Manual - Page 18
    Signal INPUT Press the INPUT button to select the input signal to be played back from the equipment which has been connected to the Plasma Display. Input signals will change as follows: R - STANDBY G POWER ON - + INPUT MENU VOL ENTER INPUT MENU + VOL ENTER INPUT1 INPUT2 INPUT3 PC IN
  • JVC GD-V422UA | Instruction Manual - Page 19
    not allow the picture to be displayed in 4:3 mode for an extended period, as this can cause a permanent after-image to remain on the Plasma Display Panel. (2) Using this function to display a picture with the aspect ratio changed from the original for the purpose of public display or commercial gain
  • JVC GD-V422UA | Instruction Manual - Page 20
    3 Press to adjust POS./ SIZE. R Press to exit from adjust mode. When the Position Left " " button is pressed. PC OFF TIMER PLASMA DISPLAY Notes: (1) Adjustment details are memorized separately for different input signal formats (Adjustments for component signals are memorized for 525 (480
  • JVC GD-V422UA | Instruction Manual - Page 21
    SOUND Adjustment 1 SOUND Press to display the Sound menu. 2 Select to adjust each item. Press to select the desired adjustment menu. Select the desired level by listening to the sound. INPUT SURROUND VOL N R PICTURE SOUND SET UP MULTI ZOOM PIP SWAP SELECT MOVE BASS Adjusts low sounds
  • JVC GD-V422UA | Instruction Manual - Page 22
    PICTURE Adjustments 1 PICTURE Press to display the PICTURE menu. 2 Select to adjust each item. Press to select the menu to adjust. Select the desired level by looking at the picture behind the menu. PICTURE NORMALIZE NORMAL PICTURE MENU PICTURE BRIGHTNESS COLOR TINT SHARPNESS COLOR TEMP
  • JVC GD-V422UA | Instruction Manual - Page 23
    PICTURE Adjustments Item Effect Adjustments PICTURE Less BRIGHTNESS Darker More Brighter Adjusts the proper picture contrast. Adjusts for easier viewing of dark pictures such as night scenes and black hair. COLOR TINT (NTSC only) Less Reddish More Greenish Adjusts color saturation. Adjust
  • JVC GD-V422UA | Instruction Manual - Page 24
    PRESENT TIME SETUP / SET UP TIMER The timer can switch the Plasma Display ON or OFF. Before attempting Timer Set, confirm the PRESENT TIME OF DAY and adjust if necessary. Then set POWER ON TIME / POWER OFF
  • JVC GD-V422UA | Instruction Manual - Page 25
    PRESENT TIME SETUP/SET UP TIMER SET UP TIMER Display the SET UP TIMER SCREEN. Press to select 1 POWER ON TIME/POWER OFF TIME. Press to set up POWER ON TIME / POWER OFF TIME. button: Forward button: Back SET UP TIMER PRESENT TIME OF DAY 2 : 30 POWER ON FUNCTION OFF POWER ON TIME 0 : 00
  • JVC GD-V422UA | Instruction Manual - Page 26
    SCREENSAVER (For preventing after-images) Do not display a still picture, especially in 4:3 mode, for any length of time. If the display must remain on, a SCREENSAVER should be used. 1 SET UP Press to display the SETUP menu screen. 2 Press to select the SCREENSAVER. SET UP 1/2 COMPONENT/RGB
  • JVC GD-V422UA | Instruction Manual - Page 27
    SCREENSAVER (For preventing after-images ) Setup of SCREENSAVER Time After selecting TIME OF DAY or INTERVAL, the relevant SET UP TIME will become available for selection and the OPERATING TIME may be set. (Time cannot be set when "MODE" is "ON" or "OFF.") SCREENSAVER SCREENSAVER SCREENSAVER
  • JVC GD-V422UA | Instruction Manual - Page 28
    area. Non picture area AB Picture out Picture Picture and Picture 1 To display the SCREENSAVER screen. (Refer to the previous page, operation guide steps 1 and 2) 2 Press to select the SCREENSAVER SIDE BAR ADJUST. PRESENT TIME OF DAY 10 : 00 START Press to select FUNCTION WHITE
  • JVC GD-V422UA | Instruction Manual - Page 29
    Zoom This displays an enlargement of the designated part of the displayed image. 1 Display the "Operation Guide". ZOOM MOVE Press to access Digital Zoom. The "Operation Guide" will be displayed. INPUT SURROUND VOL N R SURROUND button MUTE button VOL button • During Digital Zoom, only
  • JVC GD-V422UA | Instruction Manual - Page 30
    power consumption • POWER SAVE: • STANDBY SAVE: • POWER MANAGEMENT: • AUTO POWER OFF: When this function is turned ON, luminous level of the plasma display is suppressed, so power consumption is reduced. When this function is turned ON, power consumption of the microcomputer is reduced during
  • JVC GD-V422UA | Instruction Manual - Page 31
    Displays in groups of 4 or 9 as illustrated below, an enlarged picture may be displayed across all screens. For this mode of operation, each plasma display has to be set up with a DISPLAY number to determine its location. group of 4 (2×2) group of 9 (3×3) How to setup MULTI DISPLAY 1 SET UP
  • JVC GD-V422UA | Instruction Manual - Page 32
    Setup for MULTI DISPLAY How to set the Display location number for each Plasma Display 4 Press to select ARRANGEMENT (2nd step). MULTI DISPLAY SETUP Press to select "2×2", "3×3". MULTI DISPLAY SETUP ON ARRANGEMENT 2 2 LOCATION A1 5 Press to select LOCATION. MULTI
  • JVC GD-V422UA | Instruction Manual - Page 33
    SET UP for Input Signals COMPONENT / RGB IN SELECT Select to match the signals from the source connected to the COMPONENT / RGB input terminals. Y, PB, PR signals "COMPONENT" R, G, B, HD, VD signals "RGB" INPUT SURROUND 1 SET UP 2 Press to display the SET UP menu screen. Press to select
  • JVC GD-V422UA | Instruction Manual - Page 34
    set to "AUTO", the COLOR SYSTEM is automatically selected from "PAL", "SECAM" and "NTSC", but not from "M-NTSC". To view M-NTSC format pictures, you must manually set to "M-NTSC". AUTO PAL SECAM M NTSC NTSC ASPECT AUTO Set to "NORMAL" to view 4:3 images in an unchanged format when "ASPECT AUTO
  • JVC GD-V422UA | Instruction Manual - Page 35
    SYNC Select SIGNAL from the "SET UP" menu during RGB input signal. Press to select each item. R Press to exit from adjust mode. SET UP for Input Signals SET UP 1/2 COMPONENT/RGB-IN SELECT RGB INPUT LABEL RGB1 SIGNAL SCREENSAVER POWER SAVE OFF STANDBY SAVE ON POWER MANAGEMENT OFF OSD
  • JVC GD-V422UA | Instruction Manual - Page 36
    Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as signal. However, this is not a malfunction. Plasma Display panel Symptoms Some parts of the screen do not light up. Check The plasma display panel is manufactured using an extremely high level of
  • JVC GD-V422UA | Instruction Manual - Page 37
    75.00 60.00 COMPONENT RGB When Multi Screen PC and Digital Zoom ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ Note: Signals without above specification may not be displayed properly. 37
  • JVC GD-V422UA | Instruction Manual - Page 38
    Specifications Power Source Power Consumption Maximum Stand-by condition Power off condition Plasma Display panel Contrast Ratio Screen size (W × H × D) GD-V422U 120 V AC, 50 Hz / 60 Hz GD-V502U max. Amps. 5 A Save OFF 1.6W, Save ON 0.9W 0.2 W Drive method : AC type 42-inch, 16:9 aspect ratio
  • JVC GD-V422UA | Instruction Manual - Page 39
  • JVC GD-V422UA | Instruction Manual - Page 40
    © 2004 VICTOR COMPANY OF JAPAN, LIMITED VICTOR COMPANY OF JAPAN, LIMITED Printed in Japan TQZW366-1 GD-V422U / GD-V502U PLASMA DISPLAY MONITOR
  • JVC GD-V422UA | Instruction Manual - Page 41
    PLASMA DISPLAY MONITOR GD-V422PCE GD-V502PCE INSTRUCTIONS
  • JVC GD-V422UA | Instruction Manual - Page 42
    for each Plasma Display 29 Setup for Input Signals 30 Component / RGB-in Select 30 3D Y / C Filter - For NTSC AV images 30 Colour system / Aspect Auto 31 Cinema reality 31 Sync 32 H-Freq. (kHz) / V-Freq. (Hz 32 Troubleshooting 33 Input signal can be displayed 34 Specifications 35 2
  • JVC GD-V422UA | Instruction Manual - Page 43
    electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel. 3) Do not remove the earthing pin is obtained. A replacement fuse cover can be purchased from your local JVC Dealer. If the fitted moulded plug is unsuitable for the socket outlet
  • JVC GD-V422UA | Instruction Manual - Page 44
    Setup This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by JVC) • Speakers TS-C422SPG (GD-V422PCE) TS
  • JVC GD-V422UA | Instruction Manual - Page 45
    local JVC dealer so that the necessary repairs can be made. Repairing the Plasma Display Do not scratch or hit the surface of the panel with fingernails or other hard objects, otherwise the surface of the Plasma Display. If water droplets get inside the unit, operating problems may result. •
  • JVC GD-V422UA | Instruction Manual - Page 46
    the accessories and items shown Operating Instruction book GD-V422PCE GD-V502PCE Remote Control Transmitter EUR646532 INPUT SURROUND VOL N R PICTURE SOUND SET UP MULTI ZOOM PIP SWAP SELECT MOVE PICTURE POS. /SIZE ASPECT PC OFF TIMER PLASMA DISPLAY Batteries for the Remote Control
  • JVC GD-V422UA | Instruction Manual - Page 47
    speakers. Refer to the speaker's Installation Manual for details on speaker installation. 1 (Example: GD-V422PCE) Speakers (Optional accessories) 2 Note: Insert the optional Video Input Cards before combining the Plasma Display with the Stand Unit. SLOT3 From EXTERNAL monitor terminal on
  • JVC GD-V422UA | Instruction Manual - Page 48
    exceed 1,200 lines.) (2) The display resolution is a maximum of 768 × 768 dots (GD-V422PCE), 1,024 × 768 dots (GD-V502PCE) when the aspect mode is set to "4:3", and 1,024 × 768 dots (GD-V422PCE), 1,366 × 768 dots (GD-V502PCE) when the aspect mode is set to "16:9". If the display resolution
  • JVC GD-V422UA | Instruction Manual - Page 49
    (3) Additional equipment and cables shown are not supplied with this set. The SERIAL terminal conforms to the RS-232C interface specification, so that the Plasma Display can be controlled by a computer which is connected to this terminal. The computer will require software which allows the sending
  • JVC GD-V422UA | Instruction Manual - Page 50
    ) during operation of PC's screensaver.) Volume Adjustment C.A.T.S sensor Volume Up " + " Down " - " Plasma C.A.T.S (Contrast Automatic Tracking System) When the menu screen is displayed. Plasma C.A.T.S automatically senses the ambient light conditions and adjusts the brightness and gradation
  • JVC GD-V422UA | Instruction Manual - Page 51
    the displayed image. PICTURE POS. /SIZE PC ASPECT OFF TIMER PLASMA DISPLAY PICTURE POS./ SIZE button (see page 17) ASPECT button Press to adjust the aspect. (see page 16) OFF TIMER button The Plasma Display can be preset to switch to stand-by after a fixed period. The
  • JVC GD-V422UA | Instruction Manual - Page 52
    Connecting the AC plug to the Wall Outlet Note: AC plug types vary between countries / regions. Press the Main power switch on the Plasma Display to turn the Plasma Display on: Power-On. Power Indicator: Green If the power indicator is lit red, press the power button on the remote control to
  • JVC GD-V422UA | Instruction Manual - Page 53
    input signal INPUT Press the INPUT button to select the input signal to be played back from the equipment which has been connected to the Plasma Display. R - STANDBY G POWER ON - + INPUT MENU VOL ENTER Select the input signals to be connected by installing the optional Video Input Card. Input
  • JVC GD-V422UA | Instruction Manual - Page 54
    select RGB Input label RGB1 Signal Screensaver Power save Off Standby save On Power management Off OSD Language English (UK) PC OFF TIMER PLASMA DISPLAY Setup 2/2 Auto power off Off MULTI DISPLAY Setup Set up TIMER PRESENT TIME Setup To Picture Pos./ Size adjust menu (see page
  • JVC GD-V422UA | Instruction Manual - Page 55
    ). Press to select Periodic Time / Operating Time (When Interval is selected). Press to Setup. R Screensaver Start Function Mode Start Time Finish Time Side panel Wobbling Peak limit PRESENT TIME 10 : 00 White bar scroll Time Designation 7 : 00 8 : 00 High Off Off Press the R button to return to
  • JVC GD-V422UA | Instruction Manual - Page 56
    not allow the picture to be displayed in 4:3 mode for an extended period, as this can cause a permanent after-image to remain on the Plasma Display Panel. (2) Using this function to display a picture with the aspect ratio changed from the original for the purpose of public display or commercial gain
  • JVC GD-V422UA | Instruction Manual - Page 57
    Normal H-Pos H-Size V-Pos V-Size Clock Phase 3 Press to adjust Pos./ Size. R Press to exit from adjust mode. PC OFF TIMER PLASMA DISPLAY Notes: (1) Adjustment details are memorized separately for different input signal formats (Adjustments for component signals are memorized for 525 (480
  • JVC GD-V422UA | Instruction Manual - Page 58
    Picture Adjustments 1 PICTURE Press to display the Picture menu. 2 Select to adjust each item. Press to select the menu to adjust. Select the desired level by looking at the picture behind the menu. Picture Normalise Normal Picture Mode Contrast Brightness Colour Tint Sharpness White balance
  • JVC GD-V422UA | Instruction Manual - Page 59
    Picture Adjustments Item Contrast Effect Less More Adjustments Selects the proper brightness and density for the room. Notes: (1) "Colour" and "Tint" settings cannot be adjusted for "RGB" and "PC" input signals. Brightness Darker Adjusts for easier viewing of dark pictures Brighter such as
  • JVC GD-V422UA | Instruction Manual - Page 60
    Sound Adjustment 1 SOUND Press to display the Sound menu. 2 Select to adjust each item. Press to select the desired adjustment menu. Select the desired level by listening to the sound. INPUT SURROUND VOL N R PICTURE SOUND SET UP Bass Adjusts low sounds Treble Adjusts high sounds Balance
  • JVC GD-V422UA | Instruction Manual - Page 61
    Digital Zoom This displays an enlargement of the designated part of the displayed image. 1 Display the "Operation Guide". ZOOM MOVE Press to access Digital Zoom. The "Operation Guide" will be displayed. INPUT SURROUND VOL N R SURROUND button MUTE button VOL button • During Digital Zoom, only
  • JVC GD-V422UA | Instruction Manual - Page 62
    PRESENT TIME Setup / Set up TIMER The timer can switch the Plasma Display On or Off. Before attempting Timer Set, confirm the PRESENT TIME and adjust if necessary. Then set POWER ON Time / POWER OFF Time. 1 INPUT
  • JVC GD-V422UA | Instruction Manual - Page 63
    PRESENT TIME Setup / Set up TIMER Set up TIMER Display the Set up TIMER screen. 1 Press to select POWER ON Time / POWER OFF Time. Press to set up POWER ON Time / POWER OFF Time. button: Forward button: Back Set up TIMER PRESENT TIME 2 : 30 POWER ON Function Off POWER ON Time 0 : 00 POWER
  • JVC GD-V422UA | Instruction Manual - Page 64
    and the (ACTION) is pressed. Screensaver When the Mode is set to On, press to select Start. Start Function Mode Start Time Finish Time Side panel Wobbling Peak limit PRESENT TIME 10 : 00 White bar scroll On 0 : 00 0 : 00 High Off Off Press to start Screensaver. The menu screen will disappear
  • JVC GD-V422UA | Instruction Manual - Page 65
    Operating Time may be set. (Time cannot be set when "Mode" is "on" or "off.") Screensaver Start Function Mode Start Time Finish Time Side panel Wobbling PRESENT TIME 10 : 00 White bar scroll Time Designation 0 : 00 0 : 00 High Off Screensaver Start Function Mode Periodic Time Operating Time Side
  • JVC GD-V422UA | Instruction Manual - Page 66
    Picture out Picture AB Picture and Picture 1 To display the Screensaver screen. (Refer to the previous page, operation guide steps 1 and 2) 2 Press to select the Side panel. Press to select Off, Low, Mid, High. Off Low Mid High 3 R Press to exit from Screensaver. Screensaver Start
  • JVC GD-V422UA | Instruction Manual - Page 67
    power consumption • Power save: • Standby save: • Power management: • Auto power off: When this function is turned On, luminous level of the plasma display is suppressed, so power consumption is reduced. When this function is turned On, power consumption of the microcomputer is reduced during
  • JVC GD-V422UA | Instruction Manual - Page 68
    Displays in groups of 4 or 9 as illustrated below, an enlarged picture may be displayed across all screens. For this mode of operation, each plasma display has to be set up with a Display number to determine its location. group of 4 (2×2) group of 9 (3×3) How to Setup MULTI DISPLAY 1 SET UP
  • JVC GD-V422UA | Instruction Manual - Page 69
    Setup for MULTI DISPLAY How to set the display location number for each Plasma Display 4 Press to select Ratio (2nd step). Press to select "2×2", "3×3". MULTI DISPLAY Setup MULTI DISPLAY Setup On Ratio 2 2 Location A1 5 Press to select Location. MULTI
  • JVC GD-V422UA | Instruction Manual - Page 70
    Signals Component / RGB-in Select Select the input signals to be connected by installing the Optional Video Input Card. (Refer to the Operating Instructions for the optional Video Input Card.) Select to match the signals from the source connected to the Component / RGB input terminals. Y, PB
  • JVC GD-V422UA | Instruction Manual - Page 71
    to "Auto", the colour system is automatically selected from "PAL", "SECAM" and "NTSC", but not from "M-NTSC". To view M-NTSC format pictures, you must manually set to "M-NTSC". Auto PAL SECAM M.NTSC NTSC Set to "4 : 3" to view 4:3 images in an unchanged format when Aspect Auto is selected. If you
  • JVC GD-V422UA | Instruction Manual - Page 72
    Setup for input signals Sync Select Signal from the "Setup" menu during RGB input signal. Press to adjust. R Press to exit from adjust mode. Setup 1/2 Component/RGB-in select RGB Input label RGB1 Signal Screensaver Power save Off Standby save On Power management Off OSD Language
  • JVC GD-V422UA | Instruction Manual - Page 73
    Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown , this is not a malfunction. Plasma Display panel Symptoms Some parts of the screen do not light up. After-images appear Check The plasma display panel is manufactured using an extremely high
  • JVC GD-V422UA | Instruction Manual - Page 74
    28 1,600 × 1,200 @60 Hz 91.15 75.00 85.02 60.00 Component RGB When Multi Screen and Digital Zoom Note: Signals without above specification may not be displayed properly. 34
  • JVC GD-V422UA | Instruction Manual - Page 75
    Specifications Power Source Power Consumption Normal use Stand-by condition Power off condition Plasma Display panel GD-V502PCE 220 - 240 V AC, 50Hz/60 Hz 335W 445 W Save off 1.9 W, Save on 1.1 W 0.4 W Drive method : AC type Drive method : AC type 42-inch, 16:9 aspect ratio 50-inch, 16:9
  • JVC GD-V422UA | Instruction Manual - Page 76
    © 2004 VICTOR COMPANY OF JAPAN, LIMITED VICTOR COMPANY OF JAPAN, LIMITED Printed in Japan TQZW367-1 GD-V422PCE / GD-V502PCE PLASMA DISPLAY MONITOR
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
GD-V422U
GD-V502U
PLASMA DISPLAY MONITOR
INSTRUCTIONS
For customer Use:
Enter below the Model No. and the Serial
No. which is located on the rear panel of the
cabinet. Retain this information for future
reference.
Model No.
Serial No.