JVC GR D270 Instructions - Page 20
VIDEO PLAYBACK, Quick Review, Recording From The Middle Of A Tape, Normal Playback, Still Playback - reviews
View all JVC GR D270 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
20 EN NOTES: ● The time code cannot be reset. ● During fast-forwarding and rewinding, the time code indication does not move smoothly. ● The time code is displayed only when "TIME CODE" is set to "ON". (੬ pg. 34) Quick Review Enables to check the end of the last recording. 1) Press during the Recording-Standby mode. 2) Tape is rewound for about several seconds and played back automatically, then pauses in the Recording-Standby mode for the next shot. ● Distortion may occur at start of playback. This is normal. Recording From The Middle Of A Tape 1) Play back a tape or use Blank Search (੬ pg. 21) to find the spot at which you want to start recording, then engage the Still Playback mode. (See the right column.) 2) Set the Power Switch to "A" or "M" while pressing down the Lock Button located on the switch, then start recording. VIDEO PLAYBACK Normal Playback 5 3 4/9 Speaker 8 VOL. +/- Lock Button MA Power Switch MENU VIDEO/MEMORY 1 Load a cassette. (੬ pg. 16) 2 Set the VIDEO/MEMORY Switch to "VIDEO". 3 Set the Power Switch to "PLAY" while pressing down the Lock Button located on the switch. 4 To start playback, press 4/9. 5 To stop playback, press 8. ● During Stop mode, press 3 to rewind, or 5 to fast-forward the tape. To control the speaker volume Slide the Power Zoom Lever (VOL. +/-) towards "+" to turn up the volume, or towards "-" to turn down the volume. NOTES: ● The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV. (੬ pg. 22) ● If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To turn on again, set the Power Switch to "OFF", then to "PLAY". ● When a cable is connected to the S/AV connector, the sound is not heard from the speaker. Still Playback Pauses during video playback. 1) Press 4/9 during playback. 2) To resume normal playback, press 4/9 again. ● If still playback continues for more than about 3 minutes, the camcorder's Stop mode is automatically engaged.