JVC GR-D295U Instructions - Page 11

GETTING STARTED Provided Accessories OR GETTING STARTED EN 11 NOTES: ● In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder. ● Make sure to use the provided cables for connections. Do not use any other cables. How To Attach The Lens Cap To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration. NOTE: To confirm the lens cap is on correctly make sure the cap is flush to the camcorder. a AC Adapter AP-V16U or AP-V14U b Battery Pack BN-VF707U x 2 c Audio/Video Cable (ø3.5 mini-plug to RCA plug) d USB Cable e Core Filter (for USB cable, ੬ pg. 12 for attachment) f CD-ROM g Remote Control Unit RM-V720U h Lithium Battery CR2025* (for remote control unit) i Shoulder Strap (see the right column for attachment) j Lens Cap (see the right column for attachment) * A lithium battery is pre-installed in the Remote Control Unit at time of shipment (with insulation sheet). To use the Remote Control Unit, remove the insulation sheet. Place here during shooting. How To Attach The Shoulder Strap Follow the illustration. 1 Thread the strap through the eyelet. 2 Fold it back and thread it through the strap guide and the buckle. ● To adjust the length of the strap, loosen and then tighten the strap in the buckle. 3 Slide the strap guide fully towards the eyelet. Buckle Strap guide 2 2 1 3 Eyelet