JVC GR-D295U Instructions - Page 13
Power, Charging The Battery Pack - charger
UPC - 046838020049
View all JVC GR-D295U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Power This camcorder's 2-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other equipment. Charging The Battery Pack Power switch MA POWER/CHARGE lamp POWER/ CHARGE Battery pack mount PUSH BATT. Battery pack Arrow mark To DC connector Open the cover. AC Adapter To AC outlet 1 Set the Power Switch to "OFF". 2 With the arrow on the battery pack pointing downward, push the battery pack slightly against the battery pack mount a. 3 Slide down the battery pack until it locks in place b. 4 Connect the AC Adapter to the camcorder. 5 Plug the AC Adapter into an AC outlet. The POWER/CHARGE lamp on the camcorder blinks to indicate charging has started. 6 When the POWER/CHARGE lamp goes out, charging is finished. Unplug the AC Adapter from the AC outlet. Disconnect the AC Adapter from the camcorder. GETTING STARTED EN 13 To detach the battery pack Slide the battery pack upward while pressing PUSH BATT. to detach it. Battery pack Charging time BN-VF707U* Approx. 1 hr. 30 min. BN-VF714U Approx. 2 hr. 40 min. BN-VF733U Approx. 5 hr. 40 min. * Provided NOTES: ● This product includes patented and other proprietary technology and will operate only with JVC Data Battery. Use the JVC BNVF707U/VF714U/VF733U battery packs. Using generic non-JVC batteries can cause damage to the internal charging circuitry. ● If the protective cap is attached to the battery pack, remove it first. ● During charging, the camcorder cannot be operated. ● Charging is not possible if the wrong type of battery is used. ● When charging the battery pack for the first time or after a long storage period, the POWER/ CHARGE lamp may not light. In this case, remove the battery pack from the camcorder, then try charging again. ● If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced. Please purchase a new one. ● Since the AC Adapter processes electricity internally, it becomes warm during use. Be sure to use it only in well-ventilated areas. ● Using the optional AA-VF7 Battery Charger, you can charge the BN-VF707U/VF714U/VF733U battery pack without the camcorder. ● After 5 minutes has elapsed in Record-Standby mode with the cassette inserted, the camcorder will automatically turn off its power supplied from the AC adapter. In this case, the battery charge starts if the battery is attached to the camcorder. Using The Battery Pack Perform steps 2 - 3 in "Charging The Battery Pack". Maximum continuous recording time Battery pack LCD monitor on Viewfinder on BN-VF707U* 1 hr. 5 min. 1 hr. 25 min. BN-VF714U 2 hr. 20 min. 3 hr. BN-VF733U 5 hr. 25 min. 7 hr. 5 min. * Provided CONTINUED ON NEXT PAGE GETTING STARTED