JVC GR-D295U Instructions - Page 23
Playback Using The Remote Control, Installing The Battery, Beam Effective Area (indoor use) - windows 7
UPC - 046838020049
View all JVC GR-D295U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
VIDEO RECORDING & PLAYBACK Playback Using The Remote Control The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible. (੬ pg. 24) Installing The Battery The remote control uses one lithium battery 2 (CR2025). 1 Pull out the battery 1 holder by pushing the lock tab. 3 1 2 Insert the battery in the Lock tab holder, and be sure to have the "+" mark visible. 3 Slide the holder back in until you hear a click. Beam Effective Area (indoor use) When using the remote control, be sure to point it at the remote sensor. The transmitted beam's approximate effective distance for indoor use is 5 m (16 ft). Remote sensor NOTE: The transmitted beam may not be effective or may cause incorrect operation when the remote sensor is directly exposed to sunlight or powerful lighting. Buttons And Functions VIDEO PLAYBACK EN 23 The following buttons are available only when the camcorder's Power Switch is set to "PLAY". B PAUSE Button ● Pauses the tape (੬ pg. 24) Up Button (੬ pg. 24) C SLOW Rewind Button (੬ pg. 24) D REW Button ● Rewind/Reverse Shuttle Search on a tape (੬ pg. 21) ● Displays previous file in a memory card (੬ pg. 26) Left Button (੬ pg. 24) E INSERT Button (੬ pg. 46) F SHIFT Button (੬ pg. 24) G DISPLAY Button (੬ pg. 22, 43) H SLOW Forward Button (੬ pg. 24) I PLAY Button ● Starts Playback of a tape (੬ pg. 20) ● Starts Auto Playback of images in a memory card (੬ pg. 27) J FF Button ● Forward/Forward Shuttle Search on a tape (੬ pg. 21) ● Displays next file in a memory card (੬ pg. 26) Right Button (੬ pg. 24) K A. DUB Button (੬ pg. 46) L STOP Button ● Stops the tape (੬ pg. 20) ● Stops Auto Playback (੬ pg. 27) Down Button (੬ pg. 24) M EFFECT Button (੬ pg. 24) N EFFECT ON/OFF Button (੬ pg. 24) The following buttons are available when the camcorder's Power Switch is set to "A" or "M". o Zoom (T/W) Buttons Zoom in/out (੬ pg. 19, 24) (Also available with the Power Switch set to "PLAY") p START/STOP Button Functions the same as the Recording Start/ Stop Button on the camcorder. q S.SHOT Button Functions the same as SNAPSHOT on the camcorder. (Also available with the Power Switch set to "PLAY") A Infrared beam transmitting window ● Transmits the beam signal.