JVC GR-D295U Instructions - Page 33

MENUS FOR DETAILED ADJUSTMENT EN 33 5S [OFF]: Disables 5-Second Recording. 5S: Enables 5-Second Recording. (੬ pg. 37) Anim.: Allows you to record a few frames only. By using an inanimate object and changing its position between shots, you can record the subject as though it is moving. TELE MACRO [OFF]: Disables the function. ON: When the distance to the subject is less than 1 m (3.3 ft), set "TELE MACRO" to "ON". You can shoot a subject as large as possible at a distance of approx. 40 cm (1.4 ft). NOTE: Depending on the zoom position, the lens may go out of focus. SYSTEM The "s SYSTEM" functions which are set when the Power Switch is set to "M" are also applied when the Power Switch is set to "PLAY". [ ] = Factory-preset BEEP OFF: Even though not heard while shooting, shutter sound is recorded on the tape. BEEP: The beep sounds when the power is turned on or off, and at the beginning and end of recording. It also activates the shutter sound effect. (੬ pg. 25, 38) [MELODY]: Instead of a beep, a melody sounds when any operation is performed. It also activates the shutter sound effect. (੬ pg. 25, 38) ADVANCED FEATURES WIDE MODE [OFF]: Records with no change in the screen ratio. For playback on a TV with a normal screen ratio. CINEMA* : Inserts black bands at the top and bottom of the screen. The indicator appears. During playback on wide-screen TVs, the black bands at the top and bottom of the screen are cut and the screen ratio becomes 16:9. When using this mode, refer to your wide-screen TV's instruction manual. During playback/recording on 4:3 TVs/LCD monitor/viewfinder, black bands are inserted at the top and bottom of the screen and the image appears like a letter boxed 16:9 movie. SQUEEZE* : For playback on TVs with an aspect ratio of 16:9. Naturally expands the image to fit the screen without distortion. The indicator appears. When using this mode, refer to your wide-screen TV's instruction manual. During playback/recording on 4:3 TVs/ LCD monitor/viewfinder, the image is elongated vertically. * Available only when the VIDEO/MEMORY Switch is set to "VIDEO". WIND CUT [OFF]: Disengages the function. ON : Helps cut down on noise created by wind. The " " indicator appears. The quality of the sound will change. This is normal. REMOTE OFF: Disables the remote control operations. [ON]: Enables the remote control operations. DEMO MODE OFF: Automatic demonstration will not take place. [ON]: Demonstrates certain functions such as Program AE with special effects, etc., and can be used to confirm how these functions operate. Demonstration starts in the following cases: ● When the Menu Screen is closed after "DEMO MODE" is turned "ON". ● With "DEMO MODE" set to "ON", if there is no operation for about 3 minutes after the Power Switch is set to "A" or "M". ● Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume. NOTES: ● If a cassette is in the camcorder, the demonstration cannot be turned on. ● "DEMO MODE" remains "ON" even if the camcorder power is turned off. ● If "DEMO MODE" remains "ON", some functions will not be available. After viewing demo, set to "OFF".