JVC GR-D295U Instructions - Page 50

Troubleshooting, <cannot Dub On A 16bit Recording&gt

Page 50 highlights

50 EN TROUBLESHOOTING LENS CAP Appears for 5 seconds after power is turned on if the lens cap is attached or when it is dark. A. DUB ERROR! Appears if Audio Dubbing is attempted on a blank portion of a tape. (੬ pg. 46) A. DUB ERROR! ● Appears if Insert Editing is attempted on a tape recorded in the LP mode. (੬ pg. 46) ● Appears if INSERT (I) on the remote control is pressed when the erase protection tab is set to "SAVE". (੬ pg. 46) MEMORY IS FULL Appears when the memory card's memory is full and shooting is not possible. HDV Appears when pictures recorded in the HDV format are detected. The pictures in the HDV format cannot be played back with this camcorder. ? Appears when playing back a file that is not compatible with DCF or a file with a size that is not compatible with this camcorder. COPYING FAILED ● Appears if dubbing of copyguarded signals is attempted while this camcorder is being used as a recorder. ● Appears in the following cases when dubbing from a tape to a memory card: • when no memory card is loaded. • when the memory card's memory is full. • when the memory card is not formatted. • when a write-protected SD Memory Card is loaded. (੬ pg. 28) MEMORY CARD! Appears if there is no memory card loaded when you attempt to record on a memory card or access data on a memory card. PLEASE FORMAT Appears when there is a problem with a memory card and its memory is corrupt, or it has not been initialized. Initialize the memory card. (੬ pg. 30) NO IMAGES STORED Appears if there are no image files stored in the memory card when you attempt memory card playback. CARD ERROR! Appears when the camcorder does not recognize the loaded memory card. Remove the memory card once and insert it again. Repeat these procedures until no indication appears. If the indication still appears, the memory card is corrupted. CHECK CARD'S WRITE PROTECTION SWITCH Appears when you attempt to shoot digital still images when the write protection tab on the SD Memory Card is set to the "LOCK" position.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

TROUBLESHOOTING
50
EN
Appears for 5 seconds after power is turned on if
the lens cap is attached or when it is dark.
Appears if Audio Dubbing is attempted on a
blank portion of a tape. (
±
pg. 46)
Appears if Audio Dubbing is attempted on a
tape recorded in the LP mode. (
±
pg. 46)
Appears if Audio Dubbing is attempted on a
tape recorded in 16-BIT audio. (
±
pg. 46)
Appears if
A. DUB
(
D
) on the remote control is
pressed when the erase protection tab is set to
“SAVE”. (
±
pg. 46)
Appears if Insert Editing is attempted on a blank
portion of a tape. (
±
pg. 46)
Appears if Insert Editing is attempted on a tape
recorded in the LP mode. (
±
pg. 46)
Appears if
INSERT
(
I
) on the remote control
is pressed when the erase protection tab is set
to “SAVE”. (
±
pg. 46)
Appears when the memory card’s memory is full
and shooting is not possible.
Appears when pictures recorded in the HDV
format are detected. The pictures in the HDV
format cannot be played back with this
camcorder.
Appears when playing back a file that is not
compatible with DCF or a file with a size that is
not compatible with this camcorder.
Appears if dubbing of copyguarded signals is
attempted while this camcorder is being used
as a recorder.
Appears in the following cases when dubbing
from a tape to a memory card:
when no memory card is loaded.
when the memory card’s memory is full.
when the memory card is not formatted.
when a write-protected SD Memory Card is
loaded. (
±
pg. 28)
Appears if there is no memory card loaded when
you attempt to record on a memory card or
access data on a memory card.
Appears when there is a problem with a memory
card and its memory is corrupt, or it has not
been initialized. Initialize the memory card.
(
±
pg. 30)
Appears if there are no image files stored in the
memory card when you attempt memory card
playback.
Appears when the camcorder does not
recognize the loaded memory card. Remove the
memory card once and insert it again. Repeat
these procedures until no indication appears. If
the indication still appears, the memory card is
corrupted.
Appears when you attempt to shoot digital still
images when the write protection tab on the SD
Memory Card is set to the “LOCK” position.
LENS CAP
A. DUB ERROR!
A. DUB ERROR!
<CANNOT DUB ON A LP RECORDED
TAPE>
<CANNOT DUB ON A 16BIT RECORDING>
<CHECK TAPE’S ERASE PROTECTION
TAB>
INSERT ERROR!
INSERT ERROR!
<CANNOT EDIT ON A LP RECORDED
TAPE>
<CHECK TAPE’S ERASE PROTECTION
TAB>
MEMORY IS FULL
HDV
?
COPYING FAILED
MEMORY CARD!
PLEASE FORMAT
NO IMAGES STORED
CARD ERROR!
CHECK CARD’S WRITE PROTECTION
SWITCH