JVC GY-HD250U VC-P840 cable connection to HD200 Series manual (enables use of
JVC GY-HD250U - 3-ccd Prohd Camcorder Manual
 |
UPC - 046838027383
View all JVC GY-HD250U manuals
Add to My Manuals
Save this manual to your list of manuals |
JVC GY-HD250U manual content summary:
- JVC GY-HD250U | VC-P840 cable connection to HD200 Series manual (enables use of - Page 1
VC-P840U Product Information Manual Product Feature The VC-P840U provides a direct video signal connection between the JVC's HD studio Viewfinder (VF-HP840U) and the GY-HD250U/GY-HD200UB. This cable carries the camera's RGB, CMP or a Y signal depending on the Camera's VF menu setting. The Tally and - JVC GY-HD250U | VC-P840 cable connection to HD200 Series manual (enables use of - Page 2
VC-P840U and VF-HP840U System Diagrams Power applied to camera via battery mount When power is applied to the camera via a battery mount, then the following additional components are required to mount and power the VF-HP840U: • SA-K840 -VF-HP840U mount kit • PowerTap 20 - - to power
-
1 -
2
 |
 |
Product Feature
The VC-P840U provides a direct video signal connection between the JVC’s HD studio Viewfinder (VF-HP840U) and the
GY-HD250U/GY-HD200UB. This cable carries the camera’s RGB, CMP or a Y signal depending on the Camera’s VF
menu setting.
The Tally and Preview signal is sent from the camera to the VF-HP840U via serial communication. This
cable does not provide power to the camcorder. It is approximately 2ft long.
User Benefit
This cable gives the Studio System Integrator the flexibility of using the VF-HP840U in studio applications that do not use
the studio sled (KA-HD250U); such as when a third party CCU manufactured by Telecast Fiber or Camplex is used.
Owners of the GY-HD250U and GY-HD200UB also have the choice of using the high definition VF-HP840U in non studio
applications that require a viewfinder with built in features such as safety markers, focus assist, and zebras in non studio
applications that require critical focus and VF functionality.
Required Camcorder and VF-HP840U settings
When using this cable:
•
Set the GY-HD250U/GY-HD200U(B) Camera’s “
VF
Signal”
in the “
LCD/VF
” menu group to “
COMPONENT
”.
•
Set the VF-HP840U’s Dip Switch4 to “OFF”. This terminates the video inputted into the studio Viewfinder with 75
ohms.
Dip switch is located on the bottom of the VF-HP840U under a cover plate. Remove two screws from cover plate and take
cover off to expose dip switch
Product Information Manual
VC-P840U
Cable