JVC GZ-MS100U Instructions - Page 33
FURTHER INFORMATION, Troubleshooting
UPC - 683728187361
View all JVC GZ-MS100U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
ENGLISH FURTHER INFORMATION Troubleshooting The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. The following phenomena are not malfunctions. • The camcorder heats up when it is used for a long time. • The battery heats up during charging. • When playing back a video file, the image stops momentarily or the sound is interrupted at junctions between scenes. • To solve the problem, first follow the instructions below. • If the problem is not solved, reset the camcorder. (Z below) • If the problem persists, please consult your nearest JVC dealer. L To reset the camcorder 1) Close the LCD monitor to turn off the camcorder and remove the power supply (battery pack or AC adapter) from the camcorder, then reattach it. 2) Select [FACTORY PRESET] from the MENU. Power Trouble Action Z • Connect the AC adapter securely. 14 No power is supplied. • Detach the battery pack once again and reattach it firmly. 14 • Replace the dead battery with a fully charged one. - The power does not • Make sure to use the camcorder under appropriate 36 turn on, or the battery operating temperatures. operation time is • The battery is worn out and needs to be replaced. Please - extremely short even purchase a new one. after the battery is fully charged. • Charging may stop in places subject to extremely high/low - The power/charge temperatures to protect the battery. It is recommended lamp on the camcorder to charge it in places with a temperature of 10°C to 35°C does not light during (50°F to 95°F). charging. • When the battery is already fully charged, the lamp does 15 not light. Check the remaining battery power. Recording cannot be performed. • SD card is full. Delete unnecessary files or replace the SD 20 card. During recording, the • Touch the DISP button once. 13 date/time does not appear. Digital zoom does not work. • Change the settings in [ZOOM]. • Digital zoom is not available in the still image recording mode. - - Recording 33