JVC GZ MS120RU Instructions

JVC GZ MS120RU - Everio Camcorder - 800 KP Manual

JVC GZ MS120RU manual content summary:

  • JVC GZ MS120RU | Instructions - Page 1
    MÉMOIRE GZ-MS120 U Please read the instruction manual prior to connecting or operating this product. Por favor, lea el manual de (located on the bottom of the memory camera) and Serial No. (located on the battery pack mount of the memory camera) below. Model No. Serial No. Cher client, Nous
  • JVC GZ MS120RU | Instructions - Page 2
    and to the user. Carrying or holding the camcorder by the LCD monitor can result in dropping the unit, or in a malfunction. Do not use a tripod on unsteady or unlevel surfaces. It could tip over, causing serious damage to the camcorder. CAUTION! Connecting cables (Audio/Video, S-Video, etc.) to
  • JVC GZ MS120RU | Instructions - Page 3
    all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or LLC. • Other product and company names included in this instruction manual are trademarks and/or registered trademarks of their respective holders.
  • JVC GZ MS120RU | Instructions - Page 4
    Easy Start Guide Charge the Battery Before Recording Turn off the camcorder and attach the battery pack. Access lamp blinks: Accessing files Do not remove the AC adapter, the battery pack or the SD card when the lamp is blinking. Power/charge lamp blinks: Charging goes out: Charging finished
  • JVC GZ MS120RU | Instructions - Page 5
    ENGLISH Date/Time Setting Q Open the LCD monitor to turn on the camcorder Power button ( ) S Select [CLOCK SETTING] CLOCK ADJUST CLOCK SETTING AREA SETTING SET FOR DAYLIGHT SAVING TIME SET THE CITY, DATE AND TIME ! QUIT LCD monitor R Select [YES] within 10 seconds Slide your finger up and
  • JVC GZ MS120RU | Instructions - Page 6
    Video Recording CAUTION • Before recording an important scene, it is recommended to conduct a trial recording. Q Slide the mode switch to select ! (video) mode R Select recording mode The mode changes when you press the button. S Start recording Press the START/STOP button to start recording, and
  • JVC GZ MS120RU | Instructions - Page 7
    search or reverse search (Z p. 22) L To view files on TV (Z p. 25) CAUTION Do not forget to make copies after recording! • To copy files onto DVD discs (Z p. 29) • To dub files using a VCR/DVD recorder (Z p. 34) • To play back a created DVD disc (Z p. 28) • To edit files on your computer (Z p. 29) 
  • JVC GZ MS120RU | Instructions - Page 8
    Recording 24 Changing to Manual Recording Mode.......... 24 Backlight Compensation 24 Manual Setting in Menu 24 EDITING Managing Files 26 Capturing a Still Image from a Video........... 26 Deleting Files 26 COPYING Copying Files 27 Using a DVD Burner 27 Creating a DVD using a PC 29 Dubbing
  • JVC GZ MS120RU | Instructions - Page 9
    the LCD monitor and remove the power supply (battery pack or AC adapter) from the camcorder, then reattach it. Precautions on handling batteries • Be sure to use the JVC BN-VF808U/ VF815U/VF823U battery packs. • If the camcorder is subjected to electrostatic discharge, turn off the power before
  • JVC GZ MS120RU | Instructions - Page 10
    Accessories or AP-V20U/AP-V14U* AC Adapter BN-VF808U Battery Pack AV Cable USB Cable CD-ROM Core Filter (x2) NOTE Make sure to use the provided cables for connections. Do not use any other cables. * AP-V14U is not mentioned in the GUIDEBOOK in the supplied CD-ROM Attaching the Core Filter
  • JVC GZ MS120RU | Instructions - Page 11
    ENGLISH GETTING STARTED Tripod Mounting Align the camcorder stud hole with the tripod stud, and the mounting socket with the screw, and then rotate the camcorder clockwise to mount it to the tripod. Bottom of the camcorder NOTE Do not use a tripod on unsteady or unlevel surfaces. It could tip over
  • JVC GZ MS120RU | Instructions - Page 12
    GETTING STARTED Index B A DC DC NOTE • The LCD monitor can rotate 270°. • Be careful not to cover 4, 5 and 6 during shooting. 12
  • JVC GZ MS120RU | Instructions - Page 13
    Camcorder ! Touch Sensor (Z p. 9) # OK Button $ MENU Button % Power Button [ ] & UPLOAD Button (Z p. 36) ( PLAY/REC Button (Z p. 19, 20, 22, 23) ) Mode Switch [!, #] * DIRECT DVD 7 Grip Strap 8 Belt Strap 9 Fasten : Stud Hole ; Tripod Mounting Socket < Battery Release Button [BATT.] (Z p. 16) 13
  • JVC GZ MS120RU | Instructions - Page 14
    Review Indicator (Z p. 19, 20) ) Zoom Indicator (Z p. 21) * SD Card Slot Indicator : Slot A (Default Setting) B : Slot B + White Balance Indicator , Monitor Backlight Indicator - Battery Indicator . Date/Time (Z p. 16) / Manual -standby mode.) * Digital Image Stabilizer (DIS) Indicator (Appears
  • JVC GZ MS120RU | Instructions - Page 15
    ENGLISH GETTING STARTED During Video Playback During Still Image Playback 8 N OV. 1 . 2 0 0 9 4 : 5 5 P M N OV. 1 . 2 0 0 9 4 : 5 5 P M ! Mode Indicator # E: Reverse Slow-Motion (The number on the left shows speed.) ( Battery Indicator ) Date/Time (Z p. 16) * Volume Level Indicator ! Mode
  • JVC GZ MS120RU | Instructions - Page 16
    turn off the camcorder. 2 Attach the b�a��tt�e�r�y��p��a�c�k�,��th��e�n��c�o��n�n�e��c�t the AC adapter. • With the "" (arrow) on the battery pack pointing at the correct direction, slide the battery pack until it locks in place.  Arrow AC Adapter To AC Outlet (110V to 240V) • The power/charge
  • JVC GZ MS120RU | Instructions - Page 17
    Select @. L To quit the screen Select [QUIT]. Language Setting The language on the display can be changed. 1 Open the LCD monitor to turn on the camcorder. 2 Touch MENU. 3 Select [DISPLAY SETTINGS]. VIDEO SELECT ASPECT RATIO WIND CUT AUTO SWITCH REC MEDIA DISPLAY SETTINGS CONFIGURE ON-SCREEN
  • JVC GZ MS120RU | Instructions - Page 18
    supported device. Please use the camcorder or other SDHC compatible devices to access the card. QInsert an SD card Preparation: Press Power ( ) button to turn off the camcorder can select Slot A or Slot B manually as recording media for video and still image respectivety. SFormat an SD card when
  • JVC GZ MS120RU | Instructions - Page 19
    then on again. • If the camcorder is not operated for 5 minutes while the power is on, it turns itself off automatically to conserve power. To turn the camcorder on again when using the battery pack, close the LCD monitor and open it again. When using the AC adapter, perform any operation such as
  • JVC GZ MS120RU | Instructions - Page 20
    image. FINE NOTE • DIS (Digital Image Stabilizer) does not function during still image recording. • If the camcorder is not operated for 5 minutes while the power is on, it turns itself off automatically to conserve power. To turn on the camcorder again when using the battery pack, close the LCD
  • JVC GZ MS120RU | Instructions - Page 21
    [W] or [T] on the LCD monitor. (On-screen zoom turns on automatically when shooting in insufficient light conditions. Deactivates this function. Checking the Remaining Battery Power Preparation: • Attach the battery DVD INFO MAX RECORDING TIME # 14h27m SLOT A $ 21h25m % 28h27m & 75h12m SET FREE
  • JVC GZ MS120RU | Instructions - Page 22
    Playing Back Files Video Playback Preparation: • Open the LCD monitor to turn on the camcorder. • Insert an SD card. Slide the mode switch to select ! when you keep touching the sensor button under E/ G for a while. 22 L S�p�e�a�k�e��r �v�o�l�u�m�e� − : Turn down the volume + : Turn up the volume
  • JVC GZ MS120RU | Instructions - Page 23
    Playback Preparation: • Open the LCD monitor to turn on the camcorder. • Insert an SD card. Slide the mode switch to select # (still image) mode. Press PLAY/REC to select the playback mode. PLAY/REC IMAGE PLAYBACK 1/2 NOV. 01. 2009 04:55PM The index screen appears. Select the desired file
  • JVC GZ MS120RU | Instructions - Page 24
    brightens the subject by increasing the exposure. In the manual recording mode: Select -. REC L To cancel backlight compensation Select - again. NOTE If the LCD monitor is turned upside down, is not displayed. Change the setting when the LCD monitor is in the normal position. 3 Select the desired
  • JVC GZ MS120RU | Instructions - Page 25
    AC Outlet AC Adapter DC Connector Playback Operation After the connection with TV is completed 1 Turn on the camcorder and the TV. 2 Set the TV to its VIDEO mode. 3 (Only when connecting the camcorder to the VCR/DVD recorder) Turn on the VCD/DVD recorder, and set the VCR/DVD recorder to its AUX
  • JVC GZ MS120RU | Instructions - Page 26
    turning off the power) while accessing files. Also, be sure to use the provided AC adapter, as the data on the recording medium may be corrupted if the battery or 640 x 480 (if the video was recorded in 4:3). The image can be elongated in the horizontal or vertical directions depending on the
  • JVC GZ MS120RU | Instructions - Page 27
    AC Adapter To AC Outlet USB Jack NOTE It is recommended to use the JVC DVD burner (CU-VD50/CU-VD3). When using CU-VD20 or CU-VD40, the recording time may take approx. 2 times longer than the time that is described in the instruction manual of DVD burner. DVD Burner USB Connector *USB Cable NOTE
  • JVC GZ MS120RU | Instructions - Page 28
    are automatically selected and copied. 1 Open the LCD monitor to turn on the camcorder. 2 Press DIRECT DVD. DIRECT DVD INFO 3 Select [EXECUTE]. UNSAVED SCENES READY TO CREATE DVD-R EXECUTE RETURN SET QUIT • The DVD disc begins to be created. When [COMPLETED] appears, touch OK. • When [INSERT
  • JVC GZ MS120RU | Instructions - Page 29
    a PC Please read the "JVC SOFTWARE LICENCE AGREEMENT" in the CD-ROM instruction before you install software. You can copy the data from the camcorder and create a DVD using a PC. Q Installing the software to the PC System Requirements Windows Vista OS: Windows Vista® Home Basic (SP1) Home Premium
  • JVC GZ MS120RU | Instructions - Page 30
    : • Install the software to the PC. • Make sure that enough free space is left in the PC's hardisk. • Close the LCD monitor to turn off the camcorder. DC Connector AC Adapter To AC Outlet 1 Open the LCD monitor to turn on the camcorder. 2 Select [BACK UP]. USB MENU CREATE DVD UPLOAD EXPORT TO
  • JVC GZ MS120RU | Instructions - Page 31
    Athletic meet) and put the files related to the subject into the user list. Preparation: Make backup on the PC. 1 Double-Click the into the user list. 2 Select [Movies only]. To add other files into the user list, repeat steps 5 and 6. 3 Click [+]. 4 Input the name of the new user list and
  • JVC GZ MS120RU | Instructions - Page 32
    to use a DVD-R disc.) 1 Select the user list and click [Create Disc]. 2 Click [Select files individually] and click [Next]. To add all the files onto DVD discs, click [Select all files displayed], then go to step 4. 5 Click [Start]. NOTE • For detail on operating Everio MediaBrowser, click
  • JVC GZ MS120RU | Instructions - Page 33
    on their subject matter. JVC cannot answer questions regarding basic operation of your PC, or questions regarding specifications or performance of the OS, other applications or drivers. Pixela Region USA and Canada Language English Phone # +1-800-458-4029 (toll-free) Europe (UK, Germany, France
  • JVC GZ MS120RU | Instructions - Page 34
    /DVD Recorder Preparation: • Create a playlist. • Turn off all units. L To connect using the AV connectors (analog dubbing) AV Connector DC Connector AV AV Cable AC Adapter 1 Open the LCD monitor to turn on the camcorder. 2 Set the VCR/DVD recorder to its AUX input mode. Check that the images
  • JVC GZ MS120RU | Instructions - Page 35
    PC. http://www.apple.com/itunes/ 1 Connect the camcorder to the PC with the USB cable. 2 Select [EXPORT TO LIBRARY]. USB MENU CREATE DVD UPLOAD EXPORT TO LIBRARY BACK UP EASY VIDEO REGISTRATION SET QUIT All the files with the export setting turned on are transferred to PC. LCannot export the
  • JVC GZ MS120RU | Instructions - Page 36
    the LCD monitor. NOTE The upload mode turns off each time recording is finished. Uploading Files For details on uploading fi les, refer to the operation guide of MediaBrowser in the CD-ROM. 1 Connect the camcorder to the PC with the USB cable. 2 Select [UPLOAD]. USB MENU PLAYBACK ON PC CREATE DVD
  • JVC GZ MS120RU | Instructions - Page 37
    solve the problem, consult your nearest JVC dealer or JVC service center for instructions. Refer also to the FAQ of new products on JVC's website. The following phenomena are not malfunctions. • The camcorder heats up when it is used for a long time. • The battery heats up during charging. • When
  • JVC GZ MS120RU | Instructions - Page 38
    ", "Download Information", etc. in [Click for Latest Product Info] in the help of the provided Everio MediaBrowser software. Other problems L To reset the camcorder when it does not operate normally ! Close the LCD monitor and remove the power supply (battery pack or AC adapter) from the camcorder
  • JVC GZ MS120RU | Instructions - Page 39
    MORE STILL IMAGES AT THE MOMENT RECORDING FAILURE USE AC ADAPTER • Be sure to use JVC battery packs. • Select [OK] and select [YES] to perform formatting. • Check the operating procedure, and perform once again. • Turn off the camcorder, and turn it on again. • Turn off the camcorder, and turn it
  • JVC GZ MS120RU | Instructions - Page 40
    Specifications L General Power supply DC 11 V (Using AC adapter) DC 7.2 V (Using battery pack) Power consumption Approx. 1.8 W* * When the LED AC adapter Power requirement AC 110 V to 240 Vd, 50 Hz/60 Hz § Output DC 11 V , 1 A L Still image Format JPEG Image size 1 mode: 832 x 624 Image quality
  • JVC GZ MS120RU | Instructions - Page 41
    time and the number of still images are approximate and may differ depending on the recording environment, the condition of the SD card, or the remaining battery power. Required charging/recording time (approx.) hr: hour/min: minute Battery pack Charging time Recording time BN-VF808U (Provided
  • JVC GZ MS120RU | Instructions - Page 42
    the recording medium with water. • Do not use, replace, or store the recording medium in locations that are exposed to strong static electricity or electrical noise. • Do not turn off the camcorder power or remove the battery or AC adapter during shooting, playback, or when otherwise accessing the
  • JVC GZ MS120RU | Instructions - Page 43
    battery pack or disconnect the power supply while the power is on. ... leave the battery pack attached when the camcorder is JVC could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
  • JVC GZ MS120RU | Instructions - Page 44
    Setting 17 LCD Monitor 14, 42 LED Light 21 M Manual Recording 24 Menu Settings 37 N Number of Images 41 O On-screen Recording Control 19 On-screen Zoom Control 21 P Portable Media Player 35 Q Quick Review 19, 20 R Recordable Time 41 Recording Medium 42 Remaining Battery Power 21
  • JVC GZ MS120RU | Instructions - Page 45
    MEMO
  • JVC GZ MS120RU | Instructions - Page 46
    La plaque de numéro de série se trouve sur le logement de la batterie. • Les informations d'identification et l'avertissement de sécurité de l'adaptateur secteur sont éventuels. Ne pas transporter ou saisir le caméscope par l'écran LCD, car il pourrait tomber ou s'endommager. Ne pas utiliser de tré
  • JVC GZ MS120RU | Instructions - Page 47
    boucher les ouvertures de ventilation. Installer selon les instructions du fabricant. 8. Ne pas installer à le chariot, le stand, le trépied, le support ou la table spécifié par le fabricant, Confier toutes les réparations à du personnel de service qualifié. Un dépannage est nécessaire lorsque l'
  • JVC GZ MS120RU | Instructions - Page 48
    ée Ouvrez le volet de protection Batterie La batterie n'est pas chargée lors de l'achat. Adaptateur secteur Sur une prise secteur (110 V à 240 V) ATTENTION • Assurez-vous d'utiliser des batteries de JVC. Si vous utilisez des batteries d'autres fabricants, les performances et la sécurit
  • JVC GZ MS120RU | Instructions - Page 49
    DE L'HORLOGE] REGLAGE DE L'HEURE REGLAGE DE L'HORLOGE REGLAGE ZONE ETABLI POUR L'HEURE D'ETE REGLER LA VILLE, DATE, HEURE REGLER ! FIN Écran LCD R Sélectionnez [OUI] dans un délai de 10 secondes Déplacez votre doigt le long du capteur. Touchez alors OK (Z p. 9). T Sélectionnez une ville dans
  • JVC GZ MS120RU | Instructions - Page 50
    Enregistrement vidéo ATTENTION • Avant d'enregistrer une scène importante, il est recommandé d'effectuer un enregistrement test. Q Déplacez le commutateur de mode pour sélectionner le mode ! (vidéo) R Sélectionnez le mode d'enregistrement Le mode change lorsque vous appuyez sur la touche. L'
  • JVC GZ MS120RU | Instructions - Page 51
    ATTENTION N'oubliez pas de faire des copies après l'enregistrement ! • Pour copier des fichiers sur des disques DVD (Z p. 29) • Pour copier des fichiers à l'aide d'un magnétoscope/enregistreur DVD (Z p. 34) • Pour lire un disque créé (Z p. 28) • Pour éditer des fichiers sur votre ordinateur (Z p. 29
  • JVC GZ MS120RU | Instructions - Page 52
    Indicateurs sur l'écran LCD 14 Réglages nécessaires avant l'utilisation 16 Charger la batterie 16 Régler la la charge restante de la batterie...... 21 Vérifier l'espace restant sur le support DVD 27 Créer un DVD avec un ordinateur 29 Copier des fichiers sur un magnétoscope/ enregistreur DVD
  • JVC GZ MS120RU | Instructions - Page 53
    . Veuillez lire ces INSTRUCTIONS pour utiliser votre CAMÉSCOPE. Pour plus de détails sur son fonctionnement, consultez le GUIDE D'UTILISATION dans le est recommandé de les copier sur un DVD ou un autre support d'enregistrement pour stockage. JVC décline toute responsabilité pour toute perte de
  • JVC GZ MS120RU | Instructions - Page 54
    AP-V20U/AP-V14U* Adaptateur secteur BN-VF808U Batterie Câble AV Câble USB CD-ROM Filtre à noyau de ferrite (x2) REMARQUE Assurez-vous d'utiliser les câbles fournis pour les connexions. N'utilisez pas d'autres câbles. * L'AP-V14U n'est pas mentionné dans le GUIDE sur le CD-ROM fourni Fixer le
  • JVC GZ MS120RU | Instructions - Page 55
    DÉMARRAGE Montage sur un trépied Alignez l'orifice de taquet sur l'orifice du trépied, et le trou fileté de montage sur la vis, puis faites pivoter le caméscope dans le sens horaire pour le monter sur le trépied. Partie inférieure du caméscope REMARQUE N'utilisez pas un trépied photographique sur
  • JVC GZ MS120RU | Instructions - Page 56
    Index B A DC DC REMARQUE • L'écran LCD peut pivoter sur 270°. • Assurez-vous de ne pas obstruer 4, 5 et 6 lors de la prise de vue. 12
  • JVC GZ MS120RU | Instructions - Page 57
    (Z p. 36) ( Touche PLAY/REC (Z p. 19, 20, 22, 23) ) Commutateur de modes [!, #] * Touche DIRECT DVD (Z p. 28) Touche INFO (Z p. 21) + Logement de carte SD , Touche EXPORT (Z p. 35) - Connecteur AV fileté pour montage du trépied < Touche de libération de la batterie [BATT.] (Z p. 16) 13 FRANÇAIS
  • JVC GZ MS120RU | Instructions - Page 58
    Indicateurs sur l'écran LCD Pendant l'enregistrement de vidéos et de photos Indicateur de l'éclairage de l'écran - Indicateur de la batterie . Date/Heure (Z p. 16) / Indicateur de mise images numériques (DIS) (apparaît si [STABILISATEUR] est réglé sur [ARRET].) + Commutation automatique du support
  • JVC GZ MS120RU | Instructions - Page 59
    Pause K: Recherche avant J: Recherche arrière G: Ralenti avant E: Ralenti arrière (Le chiffre sur la gauche indique la vitesse.) ( Indicateur de la batterie ) Date/Heure (Z p. 16) * Indicateur de niveau du volume ! Indicateur de mode # Numéro de dossier/fichier $ Indicateur de lecture de diaporama
  • JVC GZ MS120RU | Instructions - Page 60
    Charger la batterie L Pour retirer la batterie 1 Fermez l'écran LCD pour éteindre le caméscope. 2 Fixez la batterie, puis connectez l'adaptateur CA. • La marque «» (flèche) de la batterie dirigée dans le bon sens, insérer la batterie L Pour vérifier la charge restante de la batterie Voir page 22.
  • JVC GZ MS120RU | Instructions - Page 61
    @. L Pour quitter l'écran Sélectionnez [FIN]. Régler la langue Vous pouvez changer la langue de l'affichage sur l'écran. 1 Ouvrez l'écran LCD pour allumer le caméscope. 2 Touchez MENU. 3 Sélectionnez [REGLAGES AFFICHAGE]. VIDEO CHOISIR RAPP. FORMAT FILTRE VENT COMMUT. AUTO. ENR REGLAGES
  • JVC GZ MS120RU | Instructions - Page 62
    • Les cartes MultiMediaCards ne sont pas prises en charge. • Les cartes utilisées pour enregistrer des vid érer une carte SD Préparation: Appuyez sur la touche Power ( ) pour mettre le caméscope sous tension. 1 B en tant que support d'enregistrement pour la vidéo et les images fixes. SFormater une
  • JVC GZ MS120RU | Instructions - Page 63
    sur l'écran) L Pour modifier le rapport de format de l'image (16:9/4:3) Modifier les réglages dans [CHOISIR RAPP. FORMAT]. L conomiser l'énergie. Pour rallumer le caméscope en utilisant la batterie, fermer et rouvrir l'écran LCD. En cas d'utilisation de l'adaptateur secteur, effectuer une op
  • JVC GZ MS120RU | Instructions - Page 64
    cette photo. L Pour changer la qualité d'image Modifiez les réglages dans [QUALITE IMAGE]. L Pour enregistrer des photos en rafale Sé l'énergie. Pour rallumer le caméscope en utilisant la batterie, fermer et rouvrir l'écran LCD. En cas d'utilisation de l'adaptateur secteur, effectuer une op
  • JVC GZ MS120RU | Instructions - Page 65
    sur l'écran LCD (Contrôle charge restante de la batterie Préparation: • Fixez le bloc de la batterie support d'enregistrement Préparation: • Sélectionnez le mode ! . • Sélectionnez le mode d'enregistrement. Appuyez sur la touche INFO une fois (Emplacement A) ou deux fois (Emplacement B). DIRECT DVD
  • JVC GZ MS120RU | Instructions - Page 66
    de fichiers Lecture de vidéos Préparation: • Ouvrir l'écran LCD pour allumer le caméscope. • Insérer une carte SD : Lecture Q : Pause K : Recherche en avant (durant la lecture) G : Lecture image par image en avant (pendant une pause)* L Pour supprimer une vidéo Sélectionnez * lorsque la lecture est
  • JVC GZ MS120RU | Instructions - Page 67
    Lecture de photos Préparation: • Ouvrir l'écran LCD pour allumer le caméscope. • Insérer une carte SD. Déplacez le commutateur de mode pour sélectionner le mode # (photo). Appuyez sur PLAY/REC pour sélectionner le mode de lecture. PLAY/REC LECTURE IMAGE 1/2 NOV. 01. 2009 04:55PM DIGEST L'é
  • JVC GZ MS120RU | Instructions - Page 68
    -. REC L Pour annuler la compensation de contre-jour Sélectionnez de nouveau -. REMARQUE Si l'écran LCD est à l'envers, - n'est pas affiché. Modifiez le réglage lorsque l'écran LCD est en position normale. Réglage manuel dans menu En mode d'enregistrement manuel: 1 Touchez MENU. 2 Sélectionnez
  • JVC GZ MS120RU | Instructions - Page 69
    scope et le téléviseur. 2 Réglez le téléviseur au mode VIDÉO. 3 (Uniquement en connectant le caméscope à un magnétoscope/enregistreur DVD) Allumez le magnétoscope/ enregistreur DVD et définir le mode d'entrée AUX pour ces appareils. 4 Lancez la lecture sur le caméscope. (Z p. 24, 25) L Pour afficher
  • JVC GZ MS120RU | Instructions - Page 70
    secteur fourni car le support d'enregistrement des données risque d'être endommagé si la batterie venait à se décharger complètement pendant le qualité du fichier vidéo source, il se peut que l'image soit allongée horizontalement ou verticalement. • �L�a��fo��n�c�t�io��n�d��e��p�r�is
  • JVC GZ MS120RU | Instructions - Page 71
    recommandé d'utiliser un graveur de DVD de JVC (CU-VD50/CU-VD3). Avec le CU‑VD20 ou le CU-VD40, l'enregistrement peut prendre jusqu'à deux fois plus longtemps que la durée décrite dans le guide d'utilisation du graveur de DVD. Connecteur USB COPIE Graveur de DVD *Câble USB FRANÇAIS REMARQUE
  • JVC GZ MS120RU | Instructions - Page 72
    LES SCENES]: Tous les fichiers du support d'enregistrement sont copiés. • [SCENES NON ENREG.]: Les fichiers qui n'ont jamais été copiés sur un disque DVD sont automatiquement sélectionnés et copiés. 3 Sélectionnez le numéro de disque désiré. LISTE DE CREAT. DVD TOUS(TOTAL:3) DVD1 DVD2 DVD3 REGLER
  • JVC GZ MS120RU | Instructions - Page 73
    [Propriétés]. REMARQUE • Assurez-vous que votre ordinateur a un graveur de DVD. • Si votre système ne remplit pas les conditions requises, il Easy Installation]. Suivez les instructions sur l'écran. 2 Cliquez sur [Suivant]. 3 Cliquez sur [Terminer]. L'icône Everio MediaBrowser est créée sur
  • JVC GZ MS120RU | Instructions - Page 74
    LCD pour allumer le caméscope. 2 Sélectionnez [SAUVEGARDER]. MENU USB CREER DVD TRANSFERER S'INSCR. SUR LIBRARY SAUVEGARDER SAUVEGARDER VDO/IMAGES FIXES REGLER FIN Everio riphériques de stockage de masse USB]. 2) Suivez les instructions sur l'écran et assurez-vous que le périphérique peut ê
  • JVC GZ MS120RU | Instructions - Page 75
    S Créer des listes pour arranger les fichiers Vous pouvez créer des listes pour différents sujets (par exemple Voyages, Sport...) et placer les fichiers pertinents dans ces listes. Préparation: Sauvegardez les fichiers sur l'ordinateur. 1 Cliquez deux fois sur l'icône et ouvrez le calendrier. 5
  • JVC GZ MS120RU | Instructions - Page 76
    les fichiers sur des disques DVD, cliquez sur [Selectionner tous plus de détails sur Everio MediaBrowser, cliquez sur [Aide [Aide MediaBrowser]. Vous pouvez télécharger Adobe® Reader® depuis le site du logiciel fourni, veuillez consulter les informations de support. (Z p. 33) 3 Déplacez le fichier
  • JVC GZ MS120RU | Instructions - Page 77
    support DVD support client L'utilisation de ce logiciel est autorisée selon les termes de sa licence. JVC Préparez les informations suivantes avant de contacter l'agence ou le bureau JVC local le plus proche à propos de ce logiciel (réseau de service après-vente mondial JVC : http://www.jvc JVC Canada
  • JVC GZ MS120RU | Instructions - Page 78
    à la première et à la dernière scène.) 4 Lancez l'enregistrement sur le magnétoscope ou l'enregistreur DVD au point de départ de la copie. Consultez le guide d'utilisation du magnétoscope ou de l'enregistreur DVD. L Pour arrêter la copie Arrêtez l'enregistrement sur le magnétoscope/enregistreur
  • JVC GZ MS120RU | Instructions - Page 79
    plus de détails sur le transfert, consultez le guide d'opération de MediaBrowser sur le CD-ROM. [S'INSCR. SUR LIBRARY]. MENU USB CREER DVD TRANSFERER S'INSCR. SUR LIBRARY SAUVEGARDER INSCRIPTION VDO Infos Produit] dans l'aide du logiciel Everio MediaBrowser fourni. COPIE FRANÇAIS LIB. VERIF
  • JVC GZ MS120RU | Instructions - Page 80
    durée d'enregistrement restante est affichée sur l'écran LCD. REMARQUE Le mode de téléchargement est désactivé chaque fois que l'enregistrement est terminé. Télécharger des fichiers Pour plus de détails sur le téléchargement de fichiers, consultez le guide d'opération de MediaBrowser sur le CD-ROM
  • JVC GZ MS120RU | Instructions - Page 81
    de services JVC le plus proche pour plus d'instruction. Veuillez aussi consulter le fichier FAQ des nouveaux produits sur le site Web de JVC. Les phénomènes suivants ne sont pas des dysfonctionnements. • Le caméscope chauffe lorsqu'il est utilisé pour une période prolongée. • La batterie chauffe
  • JVC GZ MS120RU | Instructions - Page 82
    ête par lui-même. Le son ou la vidéo sont interrompus. Impossible de trouver une vidéo/image enregistrée. Le voyant ne clignote pas lors du chargement de la batterie. Impossible de télécharger le fichier vers YouTube™. Impossible d'exporter le fichier vers iTunes®. Action • La carte SD est pleine
  • JVC GZ MS120RU | Instructions - Page 83
    le message apparaît toujours après le réglage de l'horloge, la batterie de l'horloge est épuisée. Consultez votre revendeur JVC le plus proche. ERREUR DE COMMUNICATION • Assurez-vous d'utiliser des batteries de JVC. NON FORMATE ERREUR DE FORMATAGE ! ERREUR SUPPRESSION DONNEES • Sélectionnez [OK
  • JVC GZ MS120RU | Instructions - Page 84
    240 g (0,54 lbs) Environ 290 g (0,64 lbs) (avec la batterie et ceinture de poignée) Température d'opération 0°C à 40°C 35% à 80% L Caméscope/écran LCD Capteur CCD progressif 1/6"��(�8�0�0��0��0�0��p�i�x�e�l�s�) Objectif F 1,8 à Format JPEG Taille d'image 1 mode: 832 x 624 Qualité d'image 2 modes: FIN
  • JVC GZ MS120RU | Instructions - Page 85
    20 m. 15 h. 40 h. Nombre approximatif d'images qu'il est possible d'enregistrer (photos) Mode Support d'enregistrement Carte SD ou SDHC Taille/qualité de l'image 256 Mo 512 Mo 1 Go 2 Go de la batterie. Durée de recharge/d'enregistrement requis (approx.) h: heure/m: minute Batterie Durée de
  • JVC GZ MS120RU | Instructions - Page 86
    un endroit frais et sec. Toute exposition prolongée à de températures élevées accélérera la décharge naturelle et diminuera la durée de vie utile. ... charger et décharger complètement la batterie tous les 6 mois lors d'un entreposage pendant une période de temps prolongée. ... retirer l'appareil du
  • JVC GZ MS120RU | Instructions - Page 87
    batterie ou débrancher l'appareil pendant que celui-ci est sous tension. ... laisser la batterie ou modifications non approuvés par JVC peuvent annuler le droit de l'utilisateur installé et utilisé selon les instructions du fabricant, peut causer des Canada. AUTRES INFORMATIONS FRANÇAIS 43
  • JVC GZ MS120RU | Instructions - Page 88
    CD-ROM 10, 29 Charge restante de la batterie 21 Compensation de contre-jour LCD 14, 42 Enregistrement manuel 24 Exporter au mode Library 35 F Finaliser 27 G Graveur de DVD 27 20 S Sauvegarder sur DVD 28 Support d'enregistrement 42 Supprimer des fichiers 26 T Télécharger des fichiers 36 V
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

ENGLISH
FRANÇAIS
FR
MEMORY CAMERA
CAMÉSCOPE À MÉMOIRE
Dear Customers
Thank you for purchasing
this memory camera. Before
use, please read the safety
information and precautions
contained in pages 2 and 3 to
ensure safe use of this product.
For Future Reference:
Enter the Model No. (located
on the bottom of the memory
camera) and Serial No. (located
on the battery pack mount of the
memory camera) below.
Model No.
Serial No.
Cher client,
Nous vous remercions d’avoir
acheté ce caméscope à
mémoire. Avant de commencer,
veuillez lire les informations
et les précautions de sécurité
présentées dans
les pages 2 et 3 pour utiliser cet
appareil en toute sécurité.
Pour consultation ultérieure:
Noter ci-dessous le N° de
modèle (figurant sous le
caméscope à mémoire) et le
N° de série (sur le logement
de la batterie du caméscope à
mémoire).
N° de modèle
N° de série
INSTRUCTIONS
MANUEL D’UTILISATION
LYT1995-001B-M
EN
Please read the instruction manual prior to
connecting or operating this product.
Por favor, lea el manual de instrucciones
antes de conectar u operar este producto.
For more details on the operations,
refer to the GUIDEBOOK in the
supplied CD-ROM.
Pour plus de détails sur son
fonctionnement, consultez le GUIDE
D’UTILISATION dans le CD-ROM fourni.
U
GZ-MS120