JVC HD52G786 Instructions - Page 57

Initial Setup Video-1 Monitor Out This function allows you to set whether the signal, which comes from VIDEO-1 input terminal, should be output from MONITOR OUT terminal. If you select it from MONITOR OUT, set it to "ON". Press the MENU button π† √® To VIDEO-1 MONITOR OUT To select ON or OFF Press the MENU button to finish INITIAL SETUP PREVIOUS VIDEO-1MONITOR OUT TV SPEAKER AUDIO OUT DIGITAL-IN DIGITAL-IN AUDIO CENTER CH INPUT NEXT PAGE SELECT OPERATE OFF ON VARI SIZE1 DIGITAL OFF (1/5) MENU EXIT TV Speaker If your TV is connected to a stereo system, you can turn off the TV speakers and listen to the audio through your stereo. π† √® Press the MENU button To TV SPEAKER To turn the TV's speakers ON or OFF Press the MENU button when finished INITIAL SETUP PREVIOUS VIDEO-1MONITOR OUT TV SPEAKER AUDIO OUT DIGITAL-IN DIGITAL-IN AUDIO OFF ON VARI SIZE1 DIGITAL CENTER CH INPUT OFF Notes: NEXT PAGE SELECT OPERATE (1/5) MENU EXIT • Before you turn the TV speaker setting from OFF to ON, make sure that the TV volume level is low! If the TV volume is set too high, the sound level will be extremely loud. • After a power interruption, the TV speaker settings will return to "ON". Audio Out If your television is connected to an external speaker source, audio out gives you the option of controlling the volume level with your TV's remote control. Press the MENU button π† √® To AUDIO OUT To VARI or FIX Press the MENU button when finished VARI: Lets you adjust the volume of the external speakers using the VOLUME+/- buttons on your TV's remote control. INITIAL SETUP PREVIOUS VIDEO-1MONITOR OUT TV SPEAKER AUDIO OUT DIGITAL-IN DIGITAL-IN AUDIO CENTER CH INPUT NEXT PAGE SELECT OPERATE OFF ON VARI SIZE1 DIGITAL OFF (1/5) MENU EXIT FIX: The volume of the external speakers is adjusted using the audio device's remote control. Note: • After the TV has been turned off, the sound from the audio out terminal continues to output sound for 5 seconds. After 5 seconds, it stops outputting sound. 57