JVC HD61FH96 Separate volume1

Thank you for purchasing a JVC television. Please read the enclosed important information

regarding the use of your TV with the ATSC Digital Cable and Cable Card connection.

In certain situations the level of the cable TV signal may cause pixelization (block noise) in the

images on one or more digital TV channels. This is not a malfunction of the TV. However, we

have enclosed some attenuators with your TV that should help eliminate this phenomenon. It

may be necessary to use one or more of these attenuators to help improve the signal.

Please note:

If the signal quality coming across your cable line is weak or poor, the use of

these attenuators may not help. If this is the case, we suggest you contact your local cable

operator for advice.

Please read the instructions below on how to use the attenuators.

If you have any further

questions please contact the JVC Customer Care Center at 1-800-252-5722.

1.)

You should have the following items that came with your TV:

2)

Connect one or more attenuators.

You may need to experiment to determine which

combination is best for you.

3)

Connect your cable wire with the attenuator(s) to the back of your TV.

6dB

3dB

ATSC /

DIGITAL CABLE

TV Rear Panel

3dB

Connect 2 example

Connect 1 example

Connect 1 example

Connect 2 example

3dB

3dB

6dB

ATSC /

DIGITAL CABLE

TV Rear Panel

3dB

6dB

LCT2006-001A-A

0905JGI-II-IM

Pixelization (block noise)