JVC HD61FH96 Instructions
JVC HD61FH96 - 60" Rear Projection TV Manual
 |
UPC - 046838020889
View all JVC HD61FH96 manuals
Add to My Manuals
Save this manual to your list of manuals |
JVC HD61FH96 manual content summary:
- JVC HD61FH96 | Instructions - Page 1
Projection Television Users Guide For Models: HD-56FH96 HD-61FH96 HD-70FH96 Illustration of HD-70FH96 and RM-C14G Important Note: In the spaces below, enter the model and serial number of your television (located at the rear of the television - JVC HD61FH96 | Instructions - Page 2
servicing) instructions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS TV In the event of trouble, unplug the unit and call a service technician. Do not has a High Intensity Discharge (HID) lamp that contains a small amount of mercury. - JVC HD61FH96 | Instructions - Page 3
by Macrovision. Reverse engineering or disassembly is TV/VCR switch to the "TV" position. IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions outlet, consult an electrician for replacement of the obsolete outlet. 10) - JVC HD61FH96 | Instructions - Page 4
14) Refer all servicing to qualified service personnel. Servicing is required when is impossible. When installing this TV, distance recommendations must be maintained mm 150 mm 50 mm POWER LAMP/PROGRAM INPUT MENU INPUT-4 S-VIDEO OPERATE + CHANNEL - accordance with the instructions, may cause - JVC HD61FH96 | Instructions - Page 5
Normally, light dusting with a soft, non-scratching duster will keep your TV clean. If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly moistened with water. You can add a few drops of mild liquid detergent to the water to help remove spots of oily - JVC HD61FH96 | Instructions - Page 6
purchasing JVC's model HD-56FH96, HD-61FH96 or HD-70FH96 HDTV-ready projection television which uses the high-quality HD-ILA projection system. This is one of the highest quality and most technologically advanced televisions available today. It is recommended that you read this instruction manual - JVC HD61FH96 | Instructions - Page 7
screen frame. Holding the screen frame could cause it to detach, causing the television to fall. 8. Do not replace the lamp immediately after use The lamp becomes extremely hot during use. If the lamp is touched immediately after use before it has a chance to cool down, there is a danger of burns - JVC HD61FH96 | Instructions - Page 8
Onscreen Menus 37 Using the Guide 37 Onscreen Menu System 38 Initial Setup /Off Timer 65 Lamp Reset 66 Button TheaterPro D6500K 69 Return+/TV 70 Sound 70 Video Status 71 Menu 76 OK 76 Back 76 TV/CATV Slide Switch 77 VCR/DVD Slide Switch 77 VCR Buttons 77 DVD Buttons 77 Light 77 8 - JVC HD61FH96 | Instructions - Page 9
Channel 81 i.LINK Menu 82 Controller 82 Device 83 Timer 84 Reservation 84 Timer Edit 85 Guide 86 Media Card Viewer 87 Readable Media Card 87 Supported Card Media 87 96 Troubleshooting 96 Changing The Lamp 98 Replacement Lamp Kit 99 Lamp Messages 99 How To Replace The Lamp 100 - JVC HD61FH96 | Instructions - Page 10
0 VIDEO STATUS C.C. NATURAL SOUND CINEMA 9 RETURN+ TV SUB CHANNEL SUB LIGHT MUTING CH GUIDE VOL OK VOL Note: Your television CH MENU VCR CHANNEL PREV NEXT BACK VCR DVD POWER TV VCR REW PLAY FF and/or remote control may differ POWER LAMP/PROGRAM REC STOP PAUSE OPEN CLOSE STILL - JVC HD61FH96 | Instructions - Page 11
Cables Used to connect an external antenna or cable TV system to your TV. S-Video Cable Component Cables Composite Cables Audio Cables JVC AV CompuLink capable components for an automated home theater. We recommend that before you start using your new television, you read your entire User's Guide - JVC HD61FH96 | Instructions - Page 12
for your specific TV and remote. These will help assist you in understanding how to connect your television to another device, as well as use the remote to set up your television. Rear Panel Diagram MODELS: HD-56FH96 HD-61FH96 HD-70FH96 Note: • The terminal labeled "SERVICE ONLY", is exclusively - JVC HD61FH96 | Instructions - Page 13
Setup Front Panel Diagram POWER LAMP/PROGRAM *HD-70FH96 ONLY TV Models POWER LAMP/PROGRAM LAMP/PROGRAM LED POWER BUTTON POWER LED MEDIA CARD SLOT Close door when using media cards SD/ MMC xD-Picture Card COMPACT FLASH MODELS: HD-56FH96, HD-61FH96, HD-70FH96 • For information on the LED - JVC HD61FH96 | Instructions - Page 14
NATURAL SOUND CINEMA 9 RETURN+ TV SUB CHANNEL SUB LIGHT MUTING CH GUIDE VOL OK VOL CH MENU VCR CHANNEL PREV NEXT BACK VCR DVD POWER TV VCR REW PLAY FF REC STOP PAUSE OPEN CLOSE STILL PAUSE RM-C14G RM-C14G MODELS: HD-56FH96 HD-61FH96 HD-70FH96 • For information on remote control - JVC HD61FH96 | Instructions - Page 15
please consult other sections of this manual. Step 1 - The Remote JVC's onscreen menu system. To use the onscreen menus, MENU BACK press the MENU instructions on programming your remote control to operate a cable box, VCR or DVD player. POWER T TV CATV MUL VCR DVD Note: • If the lamp replacement - JVC HD61FH96 | Instructions - Page 16
. • To connect a DVD player, see VCR Connection. A DVD player is optional • If you have a satellite television system, refer to the satellite TV manual. No VCR Connection Cable or Antenna Output IN Two-way Splitter OUT OUT (Attachment) Coaxial Cable (Attachment) ATSC /DIGITAL CABLE IN 75Ω (VHF - JVC HD61FH96 | Instructions - Page 17
DVD cables. Some models may vary colors. Please consult the user's manual for your DVD player for more information. • Be careful not to INPUT-1 R - AUDIO - L INPUT-2 R - AUDIO - L INPUT-3 R - AUDIO - L TV Rear Panel CENTER CHANNELINPUT Y Pb Pr INPUT-1 Y Pb Pr INPUT-2 AUDIO OUT R L Y PB - JVC HD61FH96 | Instructions - Page 18
CABLE IN I 75Ω (VHF/UHF) OR S-VIDEO VIDEO OVER VIDEO S-VIDEO VIDEO OVER R - AUDIO - L INPUT-1 R - AUDIO - L INPUT-2 R - AUDIO - L INPUT-3 R - AUDIO - L TV Rear Panel CENTER CHANNELINPUT Y Pb Pr INPUT-1 Y Pb Pr INPUT-2 AUDIO OUT R L Y PB PR OUT Green Blue Red DVD Player (OPTIONAL - JVC HD61FH96 | Instructions - Page 19
Quick Setup Connections Connecting to Monitor/Recording Output Terminal TV Rear Panel S-VIDEO VIDEO R L MONITOR/REC OUT OR VCR IN OUT IN OUT V R L Notes: • When you make this connection, set the Video-1 Monitor Out menu to ON. See page 57. • If you are receiving ATSC/Digital Cable signal, - JVC HD61FH96 | Instructions - Page 20
VCR has "A code/B code remote control switching" (see your VCR's instruction book), using VCR A code will switch the TV to input 1. • Refer to your DVD instruction book for detailed connection information. • To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see the - JVC HD61FH96 | Instructions - Page 21
also connect these using the television's rear input jacks, using the same instructions. INPUT MENU INPUT 4 S-VIDEO OPERATE + CHANNEL - OVER VIDEO + VOLUME - the side of the TV. 3) Connect a red cable from the camcorder RIGHT AUDIO OUT, into the RIGHT AUDIO IN on the side of the TV. Note: • If - JVC HD61FH96 | Instructions - Page 22
in the movie more naturally. By using your TV's speaker as the center speaker, you can obtain TV to the LEFT AUDIO INPUT on the amplifier. 2) Connect a red cable from the RIGHT AUDIO OUTPUT on the back of the TV to the RIGHT AUDIO INPUT on the amplifier. Notes: • Refer to your amplifier's manual - JVC HD61FH96 | Instructions - Page 23
from the back of the TV to the back of the amplifier. Notes: • This terminal can only output digital audio. • In order to use the optical output connection, select PCM or Dolby Digital on Digital Sound in the Digital Setup Menu. See page 79. • Refer to your owners manual on using your amplifier - JVC HD61FH96 | Instructions - Page 24
can only be used with the HDMI 1 input. • When setting the "DIGITAL AUDIO - ANALOG / DIGITAL" menu setting on the TV, please note that this setting only effects the HDMI 1 jack and that if you use a DVI to HDMI adapter this connection must be made to the HDMI 1 along with analog audio cables. 24 - JVC HD61FH96 | Instructions - Page 25
can be displayed on your TV in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI compatible devices. HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all digital audio/video interface. HDMI provides and interface between any - JVC HD61FH96 | Instructions - Page 26
up the other input connections so you can connect more devices to your television. TV Rear Panel AV Receiver MONITOR OUT Y PB PR MONITOR OUT S-VIDEO VIDEO OVER television. Note: • Please refer to your AV Receiver instruction manual for more information on connecting your speakers and other - JVC HD61FH96 | Instructions - Page 27
projection television uses a four-pin i.LINK connector to input and output MPEG2 video signals, audio signals and control signals. TV i.LINK device. • Refer to your owners manual on using your i.LINK device. • When with i.LINK D-VHS decks and HD-Camcorders (JVC brand only). If you connect other - JVC HD61FH96 | Instructions - Page 28
to connect the INPUT-3 audio input terminal to the computer's audio output terminal. TV Rear Panel VIDEO OVER R - AUDIO - L INPUT-3 R - AUDIO Pb Pr INPUT-2 PC IN (D-SUB) Notes: • Refer to your computer manual for a detailed explanation of the connections concerning your computer. • Make sure - JVC HD61FH96 | Instructions - Page 29
supported. When a picture is not displayed With some computers, some problems can be solved by changing the settings. Check the computer's refresh rate and set it to 60Hz. Computers that cannot set the refresh rate to 60 Hz, can not be used with this TV. Refer to the computer's instruction manual - JVC HD61FH96 | Instructions - Page 30
these settings. See pages 50, 63, 40. • If you press the Menu button while setting up the interactive plug-in menu, it will skip over it. Language After the "JVC INTERACTIVE PLUG IN MENU" has been displayed, the TV automatically switches to the LANGUAGE settings. You can choose to view your - JVC HD61FH96 | Instructions - Page 31
in the SET CLOCK menu. • Only when the MODE is set to AUTO, the Daylight Savings Time feature automatically adjusts your TV's clock for Daylight START CLOCK SELECT OPERATE MANUAL -- : -- -ATLANTIC JAN/01/05 ON MENU EXIT √® † √® † √® † √® † √® † √® † √® † √® † To choose MANUAL To TIME To set - JVC HD61FH96 | Instructions - Page 32
Quick Setup Plug-In Menu Auto Tuner Setup In auto tuner setup, the TV automatically scans through all television, or you can continue on in this guide for more information on programming your remote control, or using the JVC onscreen menu system to customize your television viewing experience. - JVC HD61FH96 | Instructions - Page 33
the CATV, VCR and DVD Codes You can program your remote to operate your cable box, satellite receiver, VCR or DVD player by using the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the code search function, use the - JVC HD61FH96 | Instructions - Page 34
from the list of codes shown below. 2) Slide the first 2-way selector switch to "TV" and the other 2-way selector switch to "VCR". 3) Press and hold down the 023, 045, 058, 093, 027, 081 Instant Replay 024, 023 Jensen 003 JVC 003, 004, 005, 000, 001, 002, 006, 007 VCR Marantz Marta Memorex - JVC HD61FH96 | Instructions - Page 35
the list of codes shown below. 2) Slide the first 2-way selector switch to "TV" and the other 2-way selector switch to "DVD". 3) Press and hold down the remote. DVD Player Aiwa Apex Bose Denon Funai Go-Video Harman Kardon Hitachi JVC Kenwood KLH Konka Koss Codes 043 040, 054, 055 058 020, 037 038 - JVC HD61FH96 | Instructions - Page 36
if the cable or satellite box responds. 4) If there was a response, press RETURN+/TV. The codes are now set. If there was no response, repeat Step 3. If you see if the VCR or DVD responds. 4) If there was a response, press RETURN+/TV. The codes are now set. If there was no response, repeat Step 3. If - JVC HD61FH96 | Instructions - Page 37
guide to help you learn about the features of your new television. The ones you will see most frequently are: π† √® Up and Down arrows mean press the CH+ or CH- buttons. Pressing the CH+ or CH- buttons let you: • Move vertically in a main menu Scan through TV channels (when not in a menu screen) - JVC HD61FH96 | Instructions - Page 38
Your television comes with JVC's onscreen menu system. The onscreen menus let you make adjustments to your television's operation simply and quickly. Examples of the onscreen menus are shown on the next page. Detailed explanations on using each menu follow later in this guide. For information about - JVC HD61FH96 | Instructions - Page 39
menu cannot be displayed when DYNAMIC is selected for Video Status. • When the Menu button on the TV side panel is pressed, the FRONT PANEL CONTROL menu between INITIAL SETUP 05 and PICTURE ADJUST 01 will appear. • Regarding the digital setup menu, see page 78. • MEDIA CARD VIEWER is for HD-70FH96 - JVC HD61FH96 | Instructions - Page 40
Press the OK button to start AUTO TUNER SETUP IN ANALOG TUNER MODE IN DIGITAL TUNER MODE AIR ATSC PRESS OK TO START SELECT OPERATE MENU EXIT Programming will take approximately 2 to 4 minutes. The auto tuner is finished when the message PROGRAMMING OVER! appears onscreen. Press the - JVC HD61FH96 | Instructions - Page 41
you to customize the line-up of channels received by your TV. Regarding analog channels, you can add or delete channels from A&E 05 E! CHNO. SCAN ID 06 HBO 07 L 08 09 10 SELECT OK OPERATE MENU EXIT Digital Channels Channel Summary Digital CH No. D01 D02 D02 D10-1 D10-2 D12345 Scan - JVC HD61FH96 | Instructions - Page 42
set more than the 40 maximum, the message "MEMORY OVERFLOW" will appear. You can block access to a channel by activating the channel lock. Press the MENU button π† To CHANNEL SUMMARY √® To operate π†√® To the Lock Column ( ) Press the ZERO button to lock or unlock that channel Press the - JVC HD61FH96 | Instructions - Page 43
π† √® To V-CHIP To operate (Lock icon will appear) √® π† Press ZERO to access the V-Chip menu To turn V-Chip ON or OFF (V-Chip must be turned ON for rating settings to operate) To move to SET US TV RATINGS, SET MOVIE RATINGS, or SET CANADIAN RATINGS (see following pages for descriptions of each - JVC HD61FH96 | Instructions - Page 44
Programming" category. Examples of Unrated programs: • Emergency Bulletins • News • Public Service Announcements • Sports • Some Commercials • Locally Originated Programming • Political Programs • Religious Programs • Weather Note: • TV programs or movies that do not have rating signals will be - JVC HD61FH96 | Instructions - Page 45
or comedic violence, which children should be able to discern from reality. Programs with the following ratings are designed for the entire audience. ❒ TV G stands for General Audience Most parents would find these programs suitable for all age groups. They contain little or no violence, no strong - JVC HD61FH96 | Instructions - Page 46
a lock icon. Once you've put a lock on the top row, everything in that column is automatically locked. π†√® To the TV 14 Column Press the OK button to lock Press the MENU button when finished Note: • If you want to change the setup, move the cursor to the top column and change - JVC HD61FH96 | Instructions - Page 47
or adult material. ❒ G - General Audience In the opinion of the review board, these films contain nothing in the way of sexual content, violence under 18. Directions to set Movie (MPAA) Ratings π† √® π† √® Press the MENU button To V-CHIP To operate (Lock icon appears) Press ZERO to access V-Chip - JVC HD61FH96 | Instructions - Page 48
Canadian V-Chip Ratings Press the MENU button π† √® To V-CHIP CANADIAN RATINGS ENG (for English) To enter ratings menu For example: To block viewing of programming rated MENU button to finish SET CANADIAN RATINGS ENG 18+ 14+ PG G C8 C SELECT OK OPERATE MENU EXIT Note: • For instructions - JVC HD61FH96 | Instructions - Page 49
TV comes preset with a lock code of "0000". You may change the code to any four-digit number you wish. To change the lock code, follow the steps below. Press the MENU move to the next digit PRESS OK TO FINISH SELECT OPERATE MENU EXIT Continue to follow these directions for all four numbers Press - JVC HD61FH96 | Instructions - Page 50
can perform Analog Setting of closed caption. When you are watching digital channels, you can perform Digital Auto Setting or Digital Manual Setting. Analog Setting Press the MENU button π† √® π† √® π† √® To CLOSED CAPTION To enter To MODE To select CAPTION or TEXT in MODE To CAPTION or TEXT To - JVC HD61FH96 | Instructions - Page 51
4, 5 or 6 To Appearance To enter To select Auto To Set Preview Closed Caption Sample Type Service Appearance AUTO 1 Cancel Select Set BACK Operate Back MENU Exit Digital Closed Caption > Appearance Preview Closed Caption Sample Appearance Mode Font Colors Opacities Cancel Select Operate - JVC HD61FH96 | Instructions - Page 52
Initial Setup Digital Manual Setting Press the MENU button π† √® π† √® π† √® π† √® √® π† √® π† √® To CLOSED CAPTION To enter To Type To select Auto, Advanced or Basic To Service To select 1, 2, 3, 4, 5 or 6 To Appearance To enter To select Manual To Font To enter To select Font Size or Font - JVC HD61FH96 | Instructions - Page 53
OFF IN 9 MIN." appears on the screen, and starts the countdown. If no signal is being received within 10 minutes, the TV shuts itself off. NEXT PAGE SELECT OPERATE (3/5) MENU EXIT • When i.LINK is displayed, Auto Shut Off will not work. XDS ID XDS ID Display provides a channel's call letters - JVC HD61FH96 | Instructions - Page 54
V1 SMART INPUT VIDEO INPUT LABEL POSITION ADJUSTMENT POWER INDICATOR NEXT PAGE SELECT OPERATE ON OFF ON OFF (2/5) MENU EXIT • Use the remote control. • Press the MENU button on the side of the TV for more than 3 seconds. In this case, the OSD for FRONT PANEL LOCK will appear. Note: • To turn - JVC HD61FH96 | Instructions - Page 55
PREVIOUS NOISE MUTING FRONT PANEL LOCK V1 SMART INPUT VIDEO INPUT LABEL POSITION ADJUSTMENT POWER INDICATOR NEXT PAGE SELECT OPERATE ON OFF ON OFF (2/5) MENU EXIT VIDEO INPUT LABEL VIDEO-1 VIDEO-2 VIDEO-3 VIDEO-4 DIGITAL-IN1 DIGITAL-IN2 PRESS OK TO FINISH SELECT OPERATE VCR DVD SAT GAME STB DVD - JVC HD61FH96 | Instructions - Page 56
LABEL POSITION ADJUSTMENT POWER INDICATOR NEXT PAGE SELECT OPERATE ON OFF ON OFF (2/5) MENU EXIT • When the On Timer turns ON, the LED is lit as "LOW" when you turn the power off. • If you set a timer on the TV, the power indicator will light even if the TV is on stand by. 56 - JVC HD61FH96 | Instructions - Page 57
AUDIO CENTER CH INPUT OFF ON VARI AUTO DIGITAL OFF Notes: NEXT PAGE SELECT OPERATE (1/5) MENU EXIT • Before you turn the TV speaker setting from OFF to ON, make sure that the TV volume level is low! If the TV volume is set too high, the sound level will be extremely loud. • After a power - JVC HD61FH96 | Instructions - Page 58
if you have a DTV or HDMI compatible component connected to your TV. Press the MENU button INITIAL SETUP π† √® To HDMI NEXT PAGE SELECT OPERATE (1/5) MENU EXIT component is capable of analog audio and digital video, choose ANALOG. • Refer to your DTV or HDMI component's instruction manual - JVC HD61FH96 | Instructions - Page 59
ON when you use the speaker as the center speaker of your surround system. The volume differs when the TV is being utilized as the Center Channel Input versus when it is not. π† √® Press the MENU button To CENTER CH INPUT To adjust CENTER CH INPUT to ON or OFF Press the - JVC HD61FH96 | Instructions - Page 60
HD (1080i/720p) and SD (480p/480i) video signal. Each video status can be chosen along with your favorite picture settings (Tint, Color, Picture, Bright, Detail, etc.) See page 71 for details. Color Temperature You can decide how strong or dull the colors appear on the TV screen. Press the MENU - JVC HD61FH96 | Instructions - Page 61
This TV supports the COLOR MANAGEMENT function to ensure dull colors are compensated to produce natural hues. π† √® π† Press the MENU button To COLOR MANAGEMENT To enter To select the mode "ON" or "OFF" COLOR MANAGEMENT ON OFF Press the MENU button when finished Dynamic Gamma JVC's Dynamic - JVC HD61FH96 | Instructions - Page 62
button when finished MPEG NR This function blocks noise removal and mosquito NR simultaneously. Press the MENU button π† √® π† To MPEG NR To enter To select ON or OFF. Press the MENU button when finished DIGITAL VNR AUTO MIN MAX OFF MPEG VNR ON OFF Reset Reset resets all picture adjustments - JVC HD61FH96 | Instructions - Page 63
- Use treble to adjust the level of high-frequency sound in your TV's audio. BALANCE - Adjust the level of sound between the TV's left and right speakers with the balance setting. Adjust the Sound Settings π† √ ® π† Press the MENU button To BASS, TREBLE or BALANCE To adjust the setting To move - JVC HD61FH96 | Instructions - Page 64
or OFF Press OK to finish Press the MENU button when finished When you set the clock manually, choose MANUAL by pressing the √ or ® arrows. ON in the SET CLOCK menu. • Only when the MODE set to AUTO, the Daylight Savings Time feature automatically adjusts your TV's clock for Daylight Savings. - JVC HD61FH96 | Instructions - Page 65
minutes PRESS OK TO FINISH SELECT OPERATE MENU EXIT To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the OFF TIME you don't wish to accept Press the OK button to finish Press the MENU button to exit the menu Notes: • The on/off time cannot be set to locked or guarded - JVC HD61FH96 | Instructions - Page 66
OPERATE MENU EXIT Press the OK button while the above message appears on the television screen. THE LAMP TIMER IS RESET SUCCESSFULLY. The lamp timer has now been reset. Notes: • You can use the Lamp Timer Reset only after replacing the lamp. • See Page 100 for instructions on lamp replacement - JVC HD61FH96 | Instructions - Page 67
press any multiscreen buttons, if you press the menu button, only the picture adjust screen will signal that you are watching is coming from the HDMI input, you cannot enter the SWAP or INDEX When the cable card is inserted into the TV, the combination of analog broadcasting and digital broadcasting - JVC HD61FH96 | Instructions - Page 68
Button Functions Index This allows you to quickly look at up to 12 channels at a time so that you can decide which one to watch. 1 2 3 4 5 6 7 8 9 10 11 12 Notes: • Only RF input signal will be displayed. • You can watch the channel added in channel summary. See page 41. Freeze Pressing - JVC HD61FH96 | Instructions - Page 69
can change the input mode. Notes: • When you return to TV mode, press the RETURN +/TV button or direct 10 key pad or CHANNEL +/- button. • LINK device connected. • If you have a PC connected to the TV, select VIDEO-3. TheaterPro D6500K The TheaterPro D6500K color temperature technology function - JVC HD61FH96 | Instructions - Page 70
- buttons. TV - Returns to the TV mode. Press the RETURN+/TV and hold the CHANNEL+/- buttons. Press the RETURN+/TV You will return to your programmed To choose the setting Press the MENU when finished SOUND EFFECT A.H.S.+ BBE SMART SOUND OFF ON OFF ON OFF MENU EXIT Manufactured under license from - JVC HD61FH96 | Instructions - Page 71
can also access the FRONT CONTROL PANEL screen by using the MENU button on the side of the TV instead of the remote control. It appears between INITIAL SETUP PC input as an HD signal and PIP and TWIN screens as an SD signal. Natural Cinema Natural cinema corrects the problem of blurred edges which - JVC HD61FH96 | Instructions - Page 72
analog at once, giving you a choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an MTS broadcast may also include , you can change the language by pressing the ML/MTS button. • Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo - JVC HD61FH96 | Instructions - Page 73
closed captioning. • When you select ON, it will be the mode selected in the Closed Caption Menu. • See page 50 when you set the caption/text mode. • You can also change the move up or down all the available channels your TV is able to receive. Volume +/- Use these buttons to raise or lower the - JVC HD61FH96 | Instructions - Page 74
Button Functions Favorite The Favorite button allows you to select your favorite channels easily. First, you must register the channels that you like. See how to register below. π† Press the FAVORITE button The favorite channel list will appear. To select the channel you want to watch Press the - JVC HD61FH96 | Instructions - Page 75
you are watching to give you the best possible picture quality. Aspect Ratios PANORAMA - With this ratio a normal 4:3 aspect picture is stretched to fit the dimensions of the 16:9 aspect screen. CINEMA - This ratio "zooms in" on the center part of a 4:3 aspect picture, blowing it up to fill the 16 - JVC HD61FH96 | Instructions - Page 76
by using the MENU button on the side of the TV instead of HDMI device, the aspect mode will turn to FULL automatically. If the television receives a 4:3 signal from your HDMI HD-70FH96 Only) Menu The MENU button allows you to access JVC's onscreen menu system. Press MENU to activate the onscreen menu - JVC HD61FH96 | Instructions - Page 77
to operate. • The remote is preset with the code 000 to control JVC-brand DVD players. For any other manufacturer's brand DVD player, please see the code chart and instructions on page 35. Light All remote control buttons are illuminated, except for the TV/CATV slide switch, VCR/DVD slide switch and - JVC HD61FH96 | Instructions - Page 78
Software Update • Software Update will only appear when the SD Card is inserted. Select BACK Operate Back MENU Exit • If you are watching an analog channel, you can still access the digital setup menu at anytime, while you are doing this, the background screen will turn blank. In this case - JVC HD61FH96 | Instructions - Page 79
enter To Aspect Ratio To select 4:3 or 16:9 Press the MENU button when finished Notes: • Set the mode to 4:3 or 16:9 before you record a program using the ATSC MONITOR OUT. • Make sure the mode you choose is the same as the TV's aspect ratio when the recorded program is played back, so - JVC HD61FH96 | Instructions - Page 80
π† √® To DIGITAL SETUP To enter To i.LINK Auto Play To select ON or OFF ON: Set to i.LINK input automatically OFF: Select the input manually Press the MENU button when finished Software Update At first, insert the SD(Multi-media) card into the memory card slot. This function will appear only when - JVC HD61FH96 | Instructions - Page 81
forth the analog and digital channels. Digital channels have a "D" in front of the channel number. Note: • If the cable card is inserted into the TV, you cannot use the D/A button. You can select a digital channel only. Press the D/A button To watch digital channels For example, to move to channel - JVC HD61FH96 | Instructions - Page 82
Digital Button Functions i.LINK Menu i.LINK has two menus - Controller and Device. By connecting a D- . • Some controller operations may differ from your D-VHS VCR operations. Press the i.LINK MENU button i.LINK D-VHS1 STOP 00:00:00 Controller Device POWER √®π† To select the key you want - JVC HD61FH96 | Instructions - Page 83
Digital Button Functions Device To operate, select a device. π† i.LINK Controller Renumber Device Page 2/3 D-VHS1 JVC HM-DH30000U D-VHS2 JVC HM-DH40000U HD-MOVIE 1 JVC GR-HD1 To select your device connecting with i.LINK Press the OK button Notes: • If you do not select the device, - JVC HD61FH96 | Instructions - Page 84
Digital Button Functions Timer You can set the two timers: Record and view. The timer starts the recording or turns to the channel you set for it automatically. Reservation Press the TIMER button π† To New Reservation Press the OK button Timer New Reservation Sept. 10 (Wed) 4:55PM Timer Mode - JVC HD61FH96 | Instructions - Page 85
Digital Button Functions Timer Edit When you want to confirm the timer you set or edited, or delete the timer setting, use this function. Timer Edition π† Press the TIMER button To select the timer list you want to edit Press the OK button Timer Timer Edit Sept. 10 (Wed) 4:55PM Timer Mode - JVC HD61FH96 | Instructions - Page 86
KDVRet Retailer News Channel Sept. 11 (Wed) 6:00PM - 7:00PM Mon - Fri No Yes Guide You can view the program from the GUIDE. Notes: • The GUIDE function will only work when you are receiving digital programming only. • The GUIDE will not show the correct time and date if you have not performed - JVC HD61FH96 | Instructions - Page 87
HD-70FH96 ONLY Readable Media Card This TV can read the following media cards: SD Card, MMC (Multi Media Card), Memory Stick, xD-Picture Card, CF Card (CompactFlash Card), Removable microdrive Hard Disk for JVC for card media are not supported. • The unit may have trouble detecting certain cards. In - JVC HD61FH96 | Instructions - Page 88
Media Card Viewer How to insert Media Card Before you insert a media card into the card slot, open the door on the front panel and make sure of the slot type and the direction to insert the card as illustrated. To access, gently pull the tab on the door to open it. Once you have inserted the media - JVC HD61FH96 | Instructions - Page 89
media card can not be changed. • Onscreen language is linked to LANGUAGE in the Initial Setup Menu. • When the media card viewer function is used, the menu is not used. • The following message appears on the TV screen in the following cases: - When you are inserting a media card or when the door is - JVC HD61FH96 | Instructions - Page 90
Media Card Viewer PHOTO √® Select PHOTO Press the OK button The right nine images appear. π†√® To select an image that you like Press the OK button The slide show starts. Notes: • To stop the slide show, press the BACK button. • To pause the slide show, press the OK button. To play again, press - JVC HD61FH96 | Instructions - Page 91
may be choppy or other playback problems may occur. Storage of different fi software (provided with some JVC digital cameras). This will depend upon the a malfunction of the TV. FILE √® Select FILE displayed. Double-byte characters are not supported. • The display order of thumbnails follows - JVC HD61FH96 | Instructions - Page 92
Media Card Viewer Operation Note Operation of the CH+ and CH- keys is different for slideshows started from the PHOTO/VIDEO icon and for slideshows started from the FILE icon. 1) When you select VIDEO icon and play the video, press the following buttons: CH+ : Fast-Forward CH- : Rewinding VOL+ : Up - JVC HD61FH96 | Instructions - Page 93
, jpg, JPEG, jpeg) (2) JFIF (Extensions: JPG, jpg) (3) SD-Video MPEG2-PS (Extensions: MOD, mod) (4) SD-Video ASF MPEG4 (Extensions: ASF, asf) 5) Supported image size and rate (1) Still images 160×120 to 2560×1920 pixels (The size is automatically adjusted when displayed.) (2) Video 1) MPEG2-PS - JVC HD61FH96 | Instructions - Page 94
that you have selected is too weak to receive or no signal is being detected for that channel. Weak Signal 15 No Program If the TV channel you selected, or were watching is not receiving a signal, "NO PROGRAM" appears on the television screen. It appears when that channel is not receiving - JVC HD61FH96 | Instructions - Page 95
Notes: • Please contact your local cable company regarding detailed information. Cable Card Connection CABLE CARD CABLE CARD ATSC /DIGITAL CABLE IN I TV Rear Panel Notes for inserting Cable Card: • Firmware Upgrade of Cable Card can be executed. While executing the Firmware Upgrade, please do not - JVC HD61FH96 | Instructions - Page 96
Troubleshooting PROBLEMS CHECK There is no power • See if the power cord became unplugged. • Check for a blown fuse or circuit breaker or a power outage. • It is possible the fan is stuck or the inside temperature is rising abnormally. Consult your dealer. The POWER LED and LAMP/PROGRAM LED are - JVC HD61FH96 | Instructions - Page 97
Troubleshooting PROBLEMS There is no sound from the TV's speaker Static electricity CHECK • The Center CH Input may be turned on. See page 59. • The TV the lamp is heated, and is not a malfunction. • The still parts of a picture may remain on the screen. This is a characteristic of HD-ILA elements - JVC HD61FH96 | Instructions - Page 98
of the lamp being shortened. The life of the lamp changes depending on the atmospheric temperature and altitude in which the TV is being used. Please read these instructions fully before attempting to replace the lamp. If you feel unsure about replacing the lamp yourself, call a service technician - JVC HD61FH96 | Instructions - Page 99
to www.jvc.com. The replacement kit will include the following: 1 High-Pressure Mercury Lamp 1 Instruction Manual Because the lamp contains a Lamp Message LAMP NEEDS TO BE REPLACED. REFER TO OWNER'S MANUAL FOR REPLACEMENT INSTRUCTIONS. AFTER REPLACING THE LAMP, PLEASE RESET TIMER IN THE TV MENU - JVC HD61FH96 | Instructions - Page 100
to Replace the Lamp Please read these instructions fully before attempting to replace the lamp. If you feel unsure about replacing the lamp yourself, call a service technician. Please observe all safety warnings. 1) Turn off the television. Press the POWER button on the remote control or TV front - JVC HD61FH96 | Instructions - Page 101
sit securely in the TV (flat in the lamp housing area), it won't turn on. Make sure the lamp sits securely and flat in the housing area. WARNING! Remember it is very important that YOU DO NOT TOUCH THE LAMP SURFACE. Please read the warnings on page 98 again. Also, replace the lamp with part number - JVC HD61FH96 | Instructions - Page 102
to observe all warnings. Make sure the lamp sits FLAT inside the unit when you reinstall it. • If this condition occurs except for replacing the lamp: Keep the TV off for a while and then turn the power on again. If the TV goes into warning mode, unplug the TV after the cool down as completed and - JVC HD61FH96 | Instructions - Page 103
103 - JVC HD61FH96 | Instructions - Page 104
104 - JVC HD61FH96 | Instructions - Page 105
HD-56FH96 HD-61FH96 HD-70FH96 Type HD-ILA Device Projection TV set. AC 120V, 60 Hz Power Consumption Projection Source 215W 110W High-Pressure Mercury Lamp 220W Screen Size 56 inch / 142 cm measured diagonally, 16:9 ratio 61 inch / 155 cm measured diagonally, 16:9 ratio 70 Dimensions HDMI JVC - JVC HD61FH96 | Instructions - Page 106
Notes 106 - JVC HD61FH96 | Instructions - Page 107
Notes 107 - JVC HD61FH96 | Instructions - Page 108
Notes 108 - JVC HD61FH96 | Instructions - Page 109
Notes 109 - JVC HD61FH96 | Instructions - Page 110
Notes 110 - JVC HD61FH96 | Instructions - Page 111
Notes 111 - JVC HD61FH96 | Instructions - Page 112
JVC COMPANY OF AMERICA Division of JVC Americas Corp. 1700 Valley Road Wayne, New Jersey, 07470 JVC CANADA, INC. 21 Finchdene Square Scarborough, Ontario Canada, M1X 1A7
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
 |
 |
Important Note:
In the spaces below, enter the model and serial number of your television (located
at the rear of the television cabinet).
Staple your sales receipt or invoice to the
inside cover of this guide.
Keep this user’s guide in a convenient place for future
reference.
Keep the carton and original packaging for future use.
LCT1936-001B-A
1005TNH-II-IM
Model Number:
Serial Number:
Illustration of HD-70FH96 and RM-C14G
For Models:
HD-56FH96
HD-61FH96
HD-70FH96
Projection Television Users Guide