JVC KD-AVX44 Instructions - Page 288

ENGLISH 4 Select the method to make a call. Dial Menu Redial Received Calls Phonebook Preset Calls Phone Number 09845671234 Redial*1 Shows the list of phone numbers you have dialed. = Go to the following step. Received Calls*1 Shows the list of the received calls. = Go to the following step. Phonebook*2 Shows the phone book copied from a cellular phone. = Go to the following step. Preset Calls*3 Shows the list of preset numbers. = Go to the following step. Phone Number Shows the phone number entry screen. = "How to enter a phone number" ☞ page 39 Voice Dialling (Only when the connected cellular phone has the voice recognition system): Speak the name you want to call. (Refer to the instruction manual supplied with your cellular phone.) 5 Select the name/phone number/preset number you want to call. Redial Delete 08945671234 12312341234 Dial Store • When the sound is stopped or interrupted during the use of a Bluetooth device, turn off, then turn on the unit. - If the sound is not yet restored, connect the device again. (☞ "Connecting/disconnecting a registered device" on page 36) • While talking, you can enter to adjust the built-in microphone volume level by touching MENU. (☞ page 62) *1 Displays only when the dialed or received number is made through the unit. *2 For copying, ☞ page 39. *3 For presetting, ☞ page 40. You can also enter by pressing on the remote controller then touching 6 on the unit. When a call comes in... Name and phone number (if acquired) The source is automatically changed to "Bluetooth." When is activated... The unit answers the incoming calls automatically. (☞ page 62) • When is deactivated, press SRC or touch any control to answer the incoming call. To end the call or reject an incoming call Hold SRC or any control. Answering a waiting call If your cellular phone is equipped with the call waiting function, you can put the current call on hold and answer the waiting call. Press SRC or touch any control. • To restore the on-hold call, press SRC or touch any control again. • When you end one call, you can connect to the other. When an SMS comes in... If the cellular phone is compatible with SMS (Short Message Service) and is set to (☞ page 62), the unit rings and "Receiving Message" appears on the monitor to inform you of the arrival of the message. 38