JVC KD-AVX44 Instructions - Page 398
Bluetooth device does not detect the unit., Search from the Bluetooth device again.
UPC - 046838031953
View all JVC KD-AVX44 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 398 highlights
ENGLISH USB playback Symptoms Remedies/Causes • Noise is generated. • The track played back is not a playable file format (MP3/ WMA/WAV/AAC). Skip to another file. • Do not add the extension code , , or to non-MP3/WMA/WAV/AAC tracks. • Tracks cannot play back as you have intended Playback order may differ from the one played back using them to play. other players. • "Now Reading..." keeps flashing on the • Readout time varies depending on the USB device. monitor. • Do not use too many hierarchy, folders and empty folders.* * Folder that is physically empty or folder that contains data but does not contain valid MP3/WMA/WAV/AAC track. • Turn off the power then on again. • Do not pull out or connect the USB device repeatedly while "Now Reading..." is displayed on the monitor. • Correct characters are not displayed (e.g. For available characters, ☞ page 62. album name). • While playing a track, sound is sometimes The tracks have not been properly copied into the USB interrupted. device. Copy tracks again into the USB device, and try again. • Bluetooth device does not detect the unit. • Search from the Bluetooth device again. • Reset the unit. When "Open..." appears on the monitor, search from the Bluetooth device again. • The unit does not make pairing with the • Enter the same PIN code for both the unit and target Bluetooth device. device. If the PIN code of the device is not indicated on its manuals, try "0000" or "1234." • Phone sound quality is poor. • Reduce the distance between the unit and the Bluetooth cellular phone. • Move the car to place where you can get a better signal reception. • The sound is interrupted or skipped while • Reduce the distance between the unit and the Bluetooth using a Bluetooth audio player. audio player. • Disconnect the device connected for Bluetooth phone. • Turn off, then turn on the unit. • (When the sound is not yet restored,) connect the device again. • The connected audio player cannot be Check whether the connected audio player supports AVRCP controlled. (Audio/Video Remote Control Profile). Bluetooth 66