JVC KD-AVX44 Instructions - Page 407

A Connecting the external amplifiers You can connect amplifiers to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit. • For amplifier only: - After you have connected the center speaker, make sure to activate the center speaker; otherwise, no sound comes out of the connected center speaker, see page 51 of the INSTRUCTIONS. - Disconnect the speakers from this unit, connect them to the amplifier. Leave the speaker leads of this unit unused. - You can switch off the built-in amplifier and send the audio signals only to the external amplifier(s) to get clear sounds and to prevent internal heat buildup. See page 53 of the INSTRUCTIONS. 51 53ࡗé 51 §"·π-π" 53 §"·π-π" Remote lead Rear speakers JVC Amplifier JVC JVC Front speakers JVC Amplifier JVC JVC Front speakers Remote lead (Blue with white stripe Y-connector (not supplied for this unit) Y Y To the remote lead of other equipment JVC Amplifier JVC JVC JVC Amplifier JVC JVC Center speaker Subwoofer *5 Audio cord (not supplied) *5 *5 *6 Firmly attach the ground wire to the metallic body or to the chassis of the car-to the place uncoated with paint (if coated with paint, remove the paint before attaching the wire). Failure to do so may cause damage to the unit. *6 *6 B Connections for external component playback KS-HP2 Cordless headphones (not supplied) *7 7 7 Video cord (not supplied KV-MR9010 9-INCH WIDESCREEN MONITOR (not supplied) 9 9 KV-CM1 Rear view camera (not supplied Camcorder, Navigation System, etc Audio/video cord (not supplied *7 To listen to disc playback sound while in Dual Zone operations (see page 26 of INSTRUCTIONS). *7 26 *7 Dual Zone 26 5